• 기술사
• /
• 제23권3호
• /
• pp.69-78
• /
• 1990

• 한국생산제조학회지
• /
• 제20권3호
• /
• pp.239-244
• /
• 2011

This study analyzes the behaviors on stress, fatigue and vibration about bulldozer in operation. Maximum equivalent stress is shown with the frequency of 100 Hz in case of the harmonic vibration analysis applied with force. Among the cases of nonuniform fatigue loads, 'SAE bracket history' with the severest change of load becomes most unstable but 'Sample history' becomes most stable. In case of 'Sample history' with the average stress of 0 to -105MPa and the amplitude stress of 0 to $1.617{\times}105MPa$, the possibility of maximum damage becomes 3.23%. This stress state can be shown with 5 times more than the damage possibility of 'SAE bracket history' or 'SAE transmission'. The structural result of this study can be effectively utilized with the design of bulldozer by investigating prevention and durability against its damage.

• 한국농공학회지
• /
• 제17권1호
• /
• pp.3627-3641
• /
• 1975

The Government is trying to increase total food grain yield to meet national self sufficiency by means of increasing unit yield as well as extending crop land, and this year he set the target of 321,000 hectare of forest to clear for cropping. This study was carried to investigate the most efficient method of clearing hillock by bulldozer, and successful method to develope yielding potential of newly cleared land in short term. Since the conventional land clearing method is just earth leveling and root removing neglecting top soil treatment, the growth of crop was poor and farmer tends not to care the land. The top-soil-furrowing method is applied through out this study, that is advantageous especially for the land having shallow top soil and low fertility like Korean forest. In this study, various operating method were tried to find out most efficient method separately in connection with the land slope less than 25 percent and over, and several fertilizing methods to develop yielding potential. The results are as follows; 1) For the natural land slope utilization method, applicable to the land having less than 25 percent slope, reverse operating was more efficient than using forward gear of bulldozer. The operating time was 3 hour 32 minutes and 36 seconds using forward gear was 2 hour 32 minutes and 30 seconds for reverse gear operation per 1,000 square meter. 2) Bulldozer having angle blade adjustment needed 7hr 15min. for constructing of terrace per 10a compaire with the one having angle & tilt adjustment needed 6hr 4min for same operations. Specially there is significant difference for operation time of first period (earth cutting) such as bulldozer having angle blade adjustment needed 3hr 56min compaired with the one having angle & tilt adjustment 3hr 59min. In construction of terrace, the bull-dozer having tilting and angle blade adjustment was most suitable and performed efficiently. 3) For the fertilizer application treatment, the grass (Ladino clover) yield in first year was almost same as ordinary field's in the plot applied(N.P.K+lime+manure) while none fertilizer plot showed one tenth of it, and (N.P.K.+lime) applied plot yielded on third. 4) The effect of different land clearing method to yield showed significant difference between each treatment especially in the first year, and the conventional method was the lowest. In the second year, still conventional terracing plot yielded only half of ordinary field while the other plots showed as same as ordinary field's. 5) The downward top soil treatment plot showed most rapid improvement in soil structure during one year physio chemically, it showed increase in pH rate and organic composition, and the soil changed gradually from loam to sand-loam and the moisture content increased against the pF rate, and it gives good condition to grow hay due to the increase of field water capacity with higher available water content. 6) Since the soil of tested area was granite, the rate of soil errosion was increased about 2 to 5 percent influencing in soil structure more sand reducing clay content, and an optimum contour farming method should be prepared as a counter measure of errosion.

• 한국농공학회지
• /
• 제17권2호
• /
• pp.3715-3729
• /
• 1975

• Journal of Biosystems Engineering
• /
• 제18권3호
• /
• pp.209-219
• /
• 1993

A series of soil bin experiment was carried out on sand to investigate if true model theory is applicable to blade-soil system and finally to find mathematical relationship between the dimensionless terms which contain the blade-soil parameters. The following conclusions were derived from the study. 1. It was proved that the draft of the prototype blade can be predicted without distortion by those of model blades with the length scale of 1.2, 2 and 2.4. 2. For the sand, bulk density was found to be a good measure of soil physical properties which are pertinent to predict the draft of the blade-soil system. 3. The mathematical relationship between $D/{\gamma}W$ and d/W, ${\beta}$, and $V^2/Wg$ are as follows ; $$\frac{D}{{\gamma}W^3}=124.98[\frac{d}{W}]^2+7.16[\frac{d}{W}]+0.43 \\ \frac{D}{{\gamma}W^3}=-0.00099{\beta}^2+0.13{\beta}-2.01 \\ \frac{D}{{\gamma}W^3}=0.041[\frac{V^2}{Wg}]^2+0.08[\frac{V^2}{Wg}]+1.3$$

• 한국건설관리학회논문집
• /
• 제9권1호
• /
• pp.155-166
• /
• 2008

건설공사 표준품셈 기계경비 부분은 1960년대 초 일본 및 미국의 자료를 근간으로 하여 제정된 이후, 극히 부분적으로만 제 개정되었을 뿐 그 동안의 건설기계와 공법의 발전을 반영하지 못하고 있다. 본 연구에서는 합리적인 기계경비 산출을 위해 불도우저와 로우더를 중심으로 국내 외 문헌조사, 건설현장 16개소 실사, 그리고 건설기계장비 임대업체 20개사를 대상으로 설문조사 및 인터뷰를 실시하였다. 수집한 자료와 현행 표준품셈의 기계경비 산출에 적용되는 수치들을 비교 분석한 결과, 관리비는 금리와 보험료를 고려하여 6종건설기계와 일반기계를 구분하여 현실적인 수치를 제시하였으며; 운전경비는 조수를 삭제하는 것이 현실적인 것으로 나타났다. 또한 주연료 및 잡재료는 현행수준이 적정하지만 장비가격은 상향조정할 필요가 있는 것으로 분석되었다. 논문에서 제시하고 있는 각종 자료 및 수치들은 건설기계와 기술의 급속한 발전을 예정가격산정의 기준에 적용할 수 있는 기초가 될 수 있을 뿐 아니라, 관련 연구의 토대가 될 수 있으리라 기대한다.

• 한국산업보건학회지
• /
• 제22권4호
• /
• pp.265-275
• /
• 2012

Objectives: The aim of this study was to investigate the distribution patterns and exposure concentrations of biological hazards in waste handling industries. Methods: We selected 3 recyclable waste sorting plants(RWS), 2 food recycling plants(FR), 1 landfill area(LA) and 1 waste incineration plant(WI). Total airborne bacteria and fungi were measured with single stage impactor and gelatin filters. Endotoxin and glucan were measured with polycarbonate filters in total and respirable dust. Results: The geometric mean of airborne bacterial concentration was the highest in FR($3,273CFU/m^3$), followed by LA, RWS, and WI as 1,334, 934, and $860CFU/m^3$. The fungal concentrations were 6,031, 5,052, 3,307, and $713CFU/m^3$ in RWS, WI, FR, and LA, respectively. By process, WI pit showed the highest concentrations of bacteria, fungi, and endotoxin, followed by inside of bulldozer in LA. The indoor to outdoor ratios of bacteria, fungi, endotoxin and glucan were 2.3, 4.0, 2.3, and 5.0 in RWS, 29.5, 4.9, 7.6, and 5.0 in FR, 5.3, 8.7, 26.8, and 9.5 in WI, respectively. Conclusions: We found that biological hazards, specifically bacteria in FR, fungi in RWS and endotoxin in WI pit and bulldozer at LA, should be controlled to prevent worker's respiratory diseases.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.1140-1147
• /
• 2009

Productivity measurement of construction machinery is a significant issue faced by many contractors especially those involved in earthwork projects. Traditionally, equipment production rate has been estimated using data available in manufacturers' catalogues, results of previous construction projects, or personal experience and assessments of the site personnel. Actual production rates obtained after the completion of a project demonstrate the fact that most of these methods fail to provide accurate results and as a direct consequence, may lead to unrealistic project cost estimations prepared by the contractors. What makes this more critical is that in most cases, inadequate cost estimations lead the entire project to exceed the initial budget or fall behind the schedule. In this paper, a linear regression method to estimate bulldozer productivity is introduced. This method has been developed using SPSS-16 software package. The presented method is used to estimate the productivity of Komatsu D-155A1 series which is commonly used in many earthmoving operations in Iran. The data required for the numerical analysis has been collected from actual site observation and productivity measurement of 60 pieces of D-155A1 series currently being used in several earthmoving projects in Iran. Comparative analysis of the output data of the presented regression method and the existing productivity tables provided by the manufacturer shows that when compared to the actual productivity data collected on the jobsite, a significant increase in accuracy and a remarkable reduction of data variance can be achieved by using the presented regression method.

• 한국대기환경학회지
• /
• 제19권6호
• /
• pp.805-810
• /
• 2003

The annual air pollution emissions from construction and agricultural equipments were estimated from 1987 through 2000. The annual numbers and operation hours of 5 major construction equipments (Excavator, Bulldozer, Loader, Fork lift, Crane) and 3 major agricultural equipments (Power Tiller, Agricultural Tractor, Combine) were investigated for emission estimation. And monthly variation factors of operation hours of construction equipment were investigated too. The NO$_{x}$ emission from construction equipment have been gradually increased since 1987 to 1997, but sharply decreased as -45％ in 1998 due to economic crisis in Korea. The NO$_{x}$ emission was estimated as 64,300 ton/year from construction equipment, and as 23,300 ton/year from agricultural equipment in 2000.000.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2012년도 추계학술발표대회
• /
• pp.204-206
• /
• 2012

SMP(Symmetric Multi-Processing)는 Shared memory bus 를 사용함으로써 scalability 가 제한적이었다. 이런 SMP의 scalability 제한을 극복하기 위해 제안 된 것이 NUMA(Non Uniform Memory Access)이다. NUMA는 memory bus 를 CPU 별 local 하게 가지고 있어 자신이 가지는 memory 영역에 대해서는 다른 영역을 접근하는 것 보다 더 빠른 latency 를 가지는 구조이다. Local 한 memory 영역의 존재는 scalability를 높여 주었지만 서버 가상화 환경에서 VM을 동적으로 scheduling 을 하였을 때 VM의 page 가 실행되는 core 의 local 한 메모리 영역에 존재하지 않게 되면 remote access로 인해 local access보다 성능이 떨어진다. 이 논문에서는 서버 가상화 환경에서 최신 architecture인 AMD bulldozer에서 NUMA affinity가 위반되었을 때 발생하는 성능 저하와 어떤 상황에서 이런 NUMA affinity가 위반되어도 성능저하가 없는지 연구하였다.