• Journal of Aerospace System Engineering
• /
• v.18 no.3
• /
• pp.70-75
• /
• 2024

The insulation performance of a common bulkhead propellant tank for small launch vehicles with variations in insulation thickness was analyzed. The common bulkhead propellant tank composed of a single part allows for lightweight design, as it eliminates the need for tank connections. However, problems such as propellant loss and ignition delay due to heat transfer caused by temperature differences between oxidizer and fuel may arise. Therefore, it is essential to verify the insulation performance of the common bulkhead structure that separates the oxidizer tank and fuel tank. In this study, transient heat transfer analysis was conducted for propellant tanks with insulation thicknesses of (50, 55, 60, 65, and 70) mm to analyze the insulation performance using boil-off mass. Subsequently, the boil-off mass of the oxidizer generated during the first-stage flight time of the propellant tank was determined. The results confirmed that increasing the insulation thickness reduces the boil-off mass, thereby improving the insulation performance.

• Korean Institute of Interior Design Journal
• /
• no.16
• /
• pp.59-67
• /
• 1998

This study classifies distinctive peculiarities of cruise interior design which is different from that of structures on the land through the theoretical study on the cruise equipped with functions of hotel and ship. The distinguishing marks are : The first one of the main peculiarities is associated with the International agreement and the safety of passangers and the ship required by the specific regulation. The cruise interior design should be also selectively chosen. The third in comply with the peculiarity of the space plan the base of planning the cruise spaces are as follows : The course of bow and stern the pillar the center line of ship main vertical bulkhead watertight subdivision bulkhead and the deck. The last by special peculiarity of construction materials, materials and products applied for the cruise should meet the regulation of SOLAS and IMCO.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.666-669
• /
• 2011

The rupture disc shapes of bulkhead type pulse separation device(PSD) are designed for new dual pulse rocket motor. Before final design PSD, that three different rupture disc are tested and confirmed the performance of the discs. Through analyzing the test results the PSD decides, two rupture disc shapes with flow holes of eight circles and eight trapezoids.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2017.10a
• /
• pp.73-79
• /
• 2017

IACS enacted Harmonized CSR(CSR-H) to meet the IMO GBS applied from 1 July 2016. CSR-H is clearly complement and integrate than present CSR-BC & CSR-OT. One of the biggest issue in new rule is structural analysis. In CSR-H, structural analysis must carried out entire each cargo area including the aft bulkhead of the aftermost cargo hold and the collision bulkhead. Accordingly, new load and boundary conditions are present, an additional structural reinforcement is required by the structural analysis result for each cargo hold. In this study, we applied CSR-H to existing 158K DWT CLASS CRUDE OIL TANKER in order to compare and analyze the hull changes. It is useful for the application of the CSR-H to the similar vessel and helpful in finding the optimized structural design.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2007.09a
• /
• pp.135-141
• /
• 2007

CSR(Common Structure Rules) enter into force on $1^{st}$ April 2006. Generally for double hull tankers of less than 150m in length, the Rules of the individual Classification Society are to be applied. Where high tensile stresses act through an intermediate plate, increased fillet welds or penetration welds are to be used longitudinal/transverse bulkhead primary support member end connections to the double bottom. If workers have begun to make used of established procedures between corrugated BHD and lower stool joint, first to welding on groove of face and then it has to gouging to blow on groove of root. So amount of man-hour increased, productivity secreased.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2011.09a
• /
• pp.47-50
• /
• 2011

E/R bulkhead is watertight bulkhead between engine room and cargo hold. So, it must have sufficient strength about cargo load of aft hold. Especially, partial stringer deck between tank top and $2^{nd}$ deck of engine room must have sufficient strength because it has function of primary supporting member. Generally, cargo hold structure is verified through the direct calculation as finite element analysis of cargo hold, but engine room structure doesn't perform it. Therefore, we have performed finite element analysis of engine room stringer deck which considered cargo hold load. And then, it will be able to apply similar ship design.

• Journal of Ocean Engineering and Technology
• /
• v.18 no.1
• /
• pp.22-27
• /
• 2004

An orthotropic steel deck system is widely adapted form for a long-span bridge. It has many advantages, such as the big reduction of dead weight, the simplicity for erection, and the reduction of the construction period. However, an orthotropic steel deck system requires a lot of welding work, which may result in defects and deformation of connection. Therefore, the research for the general behavior and fatigue strength of the several details in orthotropic steel deck bridge is necessary. The fatigue failure with distortion results from secondary stress by out-of-plane deformation; these kinds of cracks are very difficult to measure, and can not be precisely calculated through finite element analysis. This stress concentration phenomenon generates the fatigue failure around the lower scallop of the transverse rib. This paper presents improved details of the intersection between the longitudinal rib and the transverse rib of an orthotropic steel deck bridge by the third dimensional hit size test, and the finite element method, which can minimize local stress through parametric study.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.6
• /
• pp.792-802
• /
• 2010

A plastic analysis method is commonly used in ship and offshore structural system to utilize the ultimate strength. In this paper, the basic principle of plastic analysis method is applied to ship grillages such as transverse oil-tight bulkheads. The main emphasis is placed on the optimum arrangement of grillage system to give minimum weight. Additional parametric study is carried out to find the effect of various arrangement of grillage system. The above methods are applied to oil-tight bulkhead design, and results are compared with the existing one.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.53 no.4
• /
• pp.42-46
• /
• 2016

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.2
• /
• pp.63-73
• /
• 1998

Due to the collapse of corrugated bulkheads subject to accidental flooding which is thought to be a primary cause of bulk carrier losses International Maritime Organization(IMO), the International Association of Classification Societies(IACS) and the leading classification societies are taking a growing concern for the structural safety of corrugated bulkheads of bulk carriers. To prevent progressive collapse of corrugated bulkhead in flooded condition particularly of forward cargo ho1d they try to make rules which require reinforcement of corrugated bulkhead structure. However, we are still confronted with the urgent problem of more accurate and efficient ultimate strength assessment for corrugated bulkheads. This paper develops a special purpose nonlinear FE program for analyzing progressive collapse behavior of corrugated bulkheads subject to lateral pressure loads. As verification examples, the program is applied to collapse strength analysis of steel corrugated bulkhead test model.