• Bulletin of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.505-510
• /
• 2012

Cobalt oxide nanostructure materials have been prepared by adding several concentrations of spectator Ni ions in solution, and analyzed by electron microscopy, X-day diffraction, calorimetry/thermogravimetric analysis, UV-vis absorption, Raman, and X-ray photoelectron spectroscopy. The electron microscopy results show that the morphology of the nanostructures is dramatically altered by changing the concentration of spectator ions. The bulk XRD patterns of $350^{\circ}C$-annealed samples indicate that the structure of the cobalt oxide is all of cubic Fd-3m $Co_3O_4$, and show that the major XRD peaks shift slightly with the concentration of Ni ions. In Raman spectroscopy, we can confirm the XRD data through a more obvious change in peak position, broadness, and intensity. For the un-sputtered samples in the XPS measurement process, the XPS peaks of Co 2p and O 1s for the samples prepared without Ni ions exhibit higher binding energies than those for the sample prepared with Ni ions. Upon $Ar^+$ ion sputtering, we found $Co_3O_4$ reduces to CoO, on the basis of XPS data. Our study could be further applied to controlling morphology and surface oxidation state.

• Journal of the Korean Ceramic Society
• /
• v.49 no.3
• /
• pp.216-220
• /
• 2012

Mullite formation in a porcelain body was promoted extensively by replacing kaolinite with pyrophyllite. Effects of mullite formation and vitrification by substitution of kaolinite with pyrophyllite on the mechanical and thermal properties were investigated. Addition of 45-55% pyrophyllite (pyrophyllite (45-55%)-feldspar (30%)-Gairome clay (20%)) could vitrify the sintered samples (water absorption : 0.05%, bulk density : 2.66g/cc) and improve the flexural strength (122MPa) when fired at $1280^{\circ}C$. Mullite formation was found to be decreased with increasing content of pyrophyllite. On the contrary, beyond 50% of pyrophyllite quartz and cristobalite phases was found to be increased. Thermal expansion coefficient of the samples decreased with increase of mullite phase. In triaxial system of pyrophyllite-feldspar-clay, the mullite formation of the samples with 50% pyrophyllite reaches about 78.7% and thermal expansion coefficient was found to be $5.4{\times}10^{-6}/K$.

• Advances in materials Research
• /
• v.6 no.1
• /
• pp.1-12
• /
• 2017

The aim of the work was to evaluate the effect of ultraviolet-ozone ($UV-O_3$) irradiation with different times on the structure and thermal properties of hydroxypropyl methylcellulose (HPMC) in the form of a thin film to be used as bioequivalent materials according to their important broad practical and medical applications. HPMC thin films were exposed to $UV-O_3$ radiation in air at a wavelength of 184.9 nm.The beneficial effects of this treatment on the crystallinity and amorphousity regions were followed by X-ray diffraction technique and FTIR spectroscopy. Differential scanning calorimetry, thermogravimetric and differntial thermal analyses were used in order to study the thermal properties of HPMC samples following the process of photodegradation. The obtained results indicated that the rate of degradation process was increased with increasing the exposure time. Variations in shape and area of the thermal peaks were observed which may be attributed to the different degrees of crystallinity after exposing the treated HPMC samples. This meant a change in the amorphousity of the treated samples, the oxidation of its chemical linkages on its surface and its bulk, and the formation of free radical species as well as bond formation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.362-362
• /
• 2009

$MgB_2$ bulk samples were sintered at different ambient. In this work, high purity Ar gas was added with oxygen and hydrogen gas, which can be regarded as impurity in a sense, as a possible dopant in the $MgB_2$. It was found that oxygen in the sintering ambient leads to a decrease in the critical current density $J_c$ at self field and lower fields. However, we can obtained higher $J_c$ at higher fields. It was also noted that $MgB_2$ samples sintered with 5% hydrogen in Ar revealed the increased $J_c$ at all fields compared to those processed in pure Ar ambient. From the XRD and FESEM analysis, the impurity gas in Ar can refine the $MgB_2$ grain size and result in increased grain. boundary, which can act as a strong flux pinning sites in $MgB_2$ samples. Also discussed are the effects of sintering ambient on irreversibility field, $H_{irr}$ and the upper critical field, $H_{C2}$.

• Transactions of Materials Processing
• /
• v.15 no.8 s.89
• /
• pp.591-596
• /
• 2006

Torsion testing was employed to investigate the deformation and recrystallization behavior of coarse-grained Alloy 718, and the results are compared with the compression testing results. Mechanical testing was conducted on bulk Alloy718 samples within the temperature ranges, $1000^{\circ}C{\sim}1100^{\circ}C$. The strain gradient formed in the torsion specimens resulted in a recrystallization behavior which varied along the radial direction from the center to the surface. The flow curves based on effective stress and effective strain as obtained by Fields and Backofen's isotropic deformation theory and the dynamic recrystallization within the compression tested samples and torsion tested samples are different. The different deformation and recrystallization behavior can be rationalized by the fact that the deformation in the coarse-grained torsion specimens is not uniform and thus the strain gradient within the specimens cannot be analytically predicted by FE simulation. Thus, the extent of recrystallization cannot be properly predicted by the established recrystallization equations based on compression tests.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.12 no.1
• /
• pp.35-43
• /
• 1999

Microstructures and dielectric properties of (Sr$\_$1-x/Ca$\_$x/) TiO$_3$-0.006Nb$_2$O$\_$5/ (0.05$\leq$x$\leq$0.2) boundary layer ceramics were investigated. The samples fired in a reducing atmosphere(N$_2$) were painted on the surface with CuO paste for the subsequent grain boundary diffusion, and then annealed at 1100$^{\circ}C$ for 2 hrs. The metal oxide of CuO infiltrated by thermal diffusion from surface of sample presents continuously in not grain but only grain boundary, and makes up thin boundary phase. The SEM photo, and EDAX revealed that CuO was penetrated rapidly into the bulk along the grain boundaries during the annealing. The average grain sizes is continuously increased as the content of substitutional Ca is increased from 5[mol%] to 15[mol%], but the average grain size of the sample with content of 20[mol%] Ca is slightly decreased. In the samples with content of 10∼15[mol%] Ca, excellent dielectric properties were obtained as follows; dielectric constant <25000, dielectric loss <0.3[%], and capacitance change rate as a function of temperature <${\pm}$10[%], respectively. All samples in this study exhibited dielectric relaxation with frequency as a functior of the temperature.

• Progress in Superconductivity and Cryogenics
• /
• v.22 no.4
• /
• pp.20-23
• /
• 2020

Among many variables in processing the high performance MgB2 bulk superconductors, simple and important approach is to optimize the size dependence of the Mg & B raw powders. The present study is dedicated towards the variation in superconducting properties of MgB2 depending upon the various combination of Mg & B powders with the two different particle sizes respectively. From morphological investigation of the MgB2 samples, narrow and long pores are observed when the larger Mg powders are used, whereas it is rather like the oval shapes with the smaller Mg powders. Also, it can be seen that the connectivity of the MgB2 samples is much enhanced with the smaller size of the B powders. Jc-H properties of the MgB2 samples also indicate that the highest Jc can be obtained when using the smaller size of the B powder with the combination of the smaller Mg powders than that of the larger Mg powders. If the cases with the larger B powers, it is more favorable to select the larger Mg powders with the better Jc-H properties considering shorter diffusion length of Mg and more homogeneous mixture between the Mg & B powders.

• Journal of Food Hygiene and Safety
• /
• v.34 no.4
• /
• pp.348-353
• /
• 2019

This study was conducted to monitor the carbendazim residues in soybean and mungbean sprouts using LC-MS/MS method. Eighty-two samples were collected from markets in western Seoul. No carbendazim was detected in mungbean sprouts, however, it was detected in 6 among 59 soybean sprout samples showing a 10.2% of detection rate. Among these 6 carbendazim- detected soybean sprout samples, five exceeded the maximum residue limit presenting 83.3% of violation rate. The mean concentration in the detected samples was 0.063 mk/kg (0.012 ~ 0.104 mg/kg) and 5 of the 6 detected samples came from bulk sold products. None of the samples came from domestic products; three were from imported products and 3 were from unidentified sources. Risk assessment for the carbendazim from soybean sprout dietary intake was deemed safe and at less than 1 %Acceptable Daily Intake.

• Journal of the Korean Magnetics Society
• /
• v.6 no.3
• /
• pp.145-150
• /
• 1996

The magnetic thin films can be prepared without vacuum process and under the low temperature ( < $100^{\circ}C$) by ferrite plating. We have performed ferrite plating of $Fe_{3-x}Mn_{x}O_4(x=0.0~0.023)$ films on glass plate at $80^{\circ}C$. We got the film $9000\AA$ in thickness, having a mirror-like luster. The composition parameter, x, in the $Fe_{3-x}Mn_{x}O_4$ films is much smaller then the corresponding on, x', in the reaction solution(x/x'=O.04). The saturation magnetization($M_{s}$) of $Fe_{3}O_{4}$ ferrite film as measured by a VSM was $M_{s}$=480 emu/cc which agrees with $Fe_{3}O_{4}$ bulk samples.

• Korean Journal of Materials Research
• /
• v.27 no.8
• /
• pp.438-444
• /
• 2017

In this work, the effects of hydrogen reduction on the microstructure and thermoelectric properties of $(GeTe)_{0.85}(AgSbTe_2)_{0.15}$ (TAGS-85) were studied by a combination of gas atomization and spark plasma sintering. The crystal structure and microstructure of TAGS-85 were characterized by X-ray diffraction(XRD) and scanning electron microscopy (SEM). The oxygen content of both powders and bulk samples were found to decrease with increasing reduction temperature. The grain size gradually increased with increasing reduction temperature due to adhesion of fine grains in a temperature range of 350 to $450^{\circ}C$. The electrical resistivity was found to increase with reduction temperature due to a decrease in carrier concentration. The Seebeck coefficient decreased with increasing reduction temperature and was in good agreement with the carrier concentration and carrier mobility. The maximum power factor, $3.3{\times}10^{-3}W/mK^2$, was measured for the non-reduction bulk TAGS-85 at $450^{\circ}C$.