• 한국연초학회지
• /
• 제21권1호
• /
• pp.5-9
• /
• 1999

In recent years, the line of increase in policy on tobacco production triggered a rise in the loading volume per bulk curing barn, and manufacturers boosted the output of their blowers in order to prevent dirty leaves in the process of curing. for this reason, we studied the effect of the reducing air flow in bulk curing chamber from the color fixing stage to the stem drying stage of flue curing process on physical properties of cured leaves. The control of air flow was composed of the reducing air velocity of blower by means of a voltage regulator (slidac), and condition before color fixing stage was all the same with the conventional curing method. As a result, an effectiveness of improvement in the physical properties of cured leaves were observed. The leaves cured by this method were somewhat orange in color of upper stalk position, better bodied, and less brittle compared with the leaves produced by conventional curing. However, the leaves cured by this method had a little sharpness and harshness. As to the physical properties, there was decreased in occurrence of flat leaves than that of conventional ones. On the other hand, in case of reducing air flow during the curing process, increase of price per kg reached to about 5 % compared with those of conventional curing method.

• 한국연초학회지
• /
• 제21권2호
• /
• pp.182-187
• /
• 1999

A bulk curing experiment was carried out to evaluate the effect of air flow reduction in the bulk barn from color fixing stage in the chemical properties of cured leaves, The air flow was controlled by reducing air velocity of a blower from 0.3m/sec to 0.2m/sec using a boltage regulator(Slidac). The bulk curing before color fixing stage was processed in the conventional curing method. Reduction of air circulation in bulk barn did not affected so much on change of the contents of the main chemical components in cured leaved, such as nicotine, total sugar, total nitrogen, petroleum ether extract, and organic acids. Only a slight increase in essential oil contents, such as solanone, damascenone, damascone, $\beta$-ionone, and megastigmatrienone isomer, could be observed in leaves cured in the reduced air flow.

• 한국연초학회지
• /
• 제22권1호
• /
• pp.13-18
• /
• 2000

All steps of the curing process are automatically controlled by preseted program according to stalk positions in flue-cured tobacco. The bulk curing experiment was carried out to evaluate the effect of the basic and modified curing program in curing time schedule of two bulk models in physical properties of cured leaves in a new flue-cured tobacco variety KF 114(Wicotiano tabacum L.). The curing process of KF 114 was prolonged in yellowing and quicker in browning stage than those of NC 82. There was no significant difference in physical properties and chromatic characteristics of the cured leaves between basic and modified program at two bulk models. The ratio of normal leaf color tended to increase and the greenish leaf decreased in the modified curing program of two models, but no difference in the brownish leaf ratio was olserved between two programs.

• 한국연초학회지
• /
• 제22권2호
• /
• pp.133-137
• /
• 2000

The bulk curing experiment to improve the quality of flue-cured leaves were carried out to evaluate relationship between the modified(3 step-up) drying and conventional drying method in bulk curing process. Modified drying method was somewhat higher values in yellowing color index of cured leaves, and less brittle than those in conventional drying program. As to the chemical properties, there was no difference in chemical component levels in cured leaves between the modified and the conventional methods, while the major chemical compounds in relation to aromatic essential oil of cured leaves showed mostly higher level in the modified method than that in conventional drying method. Additionally 3 step-up drying method increased the tobacco quality by 2 % in price per kg compared with conventional drying method.

• 한국연초학회지
• /
• 제21권1호
• /
• pp.10-16
• /
• 1999

Leaves harvested were separated with visual characters into 2 classes such as immature and mature leaves. In the curing process, the prolonged yellowing treatment during yellowing stage was automatically controlled at the different stalk position, and condition of curing process after this period was all the same with conventional ones. In case of prolonged yellowing in immature leaves, increase of price per kg reached to 8 % compared with those of conventional ones. In physical properties, filling capacity and shatter index was decreased with the degree of maturity, and it was equal level in filling capacity of immature leaves between curing method, while shatter index was decreased in prolonged yellowing treatment than that of conventional ones. There was no difference in chemical components between immature leaves of prolonged yellowing and conventional ones. As to the prolonged yellowing of immature leaves, there was decreased in citric and malic acid contents of the nonvolatile organic acids, and it was equal level in all higher fatty acids content of leaves cured by prolonged yellowing treatment compared with in that of conventional curing method. The contents of key compounds such as solanone, damascenone, damascone in the essential oil were lower in prolonged yellowing of immature leaves than those of mature leaves cured by conventional ones.

• 한국연초학회지
• /
• 제5권2호
• /
• pp.9-15
• /
• 1983

The effect of leaf dehydration process and air flow capacity of bulk curing on physical properties and composition of cured leaves was studied, respectively, during flue- curing. Cured leaves from excessive moisture during yellowing stage and those from rapid dehydration Process inevitably during later stages, tend towards lower equilibrium moisture contents, higher shatter index, hither protein nitrogen, and leaf scalding or deterioration of Beaves with redish cast. Early dehydration at the yellowing stage re suited in increasing of p Bamitic, stearic, linoleic, and linolenic acid contents, but showed reduction of brightness difference between upper and lower surface of the cured leaves, Leaf surface lipid decreased with the progress of curing stages, more conspicuously during later stage. Lowering air flow capacity of fan by 50oye during stem drying stage resulted in increasing of leaf surface lipid and 25oye decreasing of electric power consumption , but curing period and kerosene consumption were not affected.

• 한국연초학회:학술대회논문집
• /
• 한국연초학회 1999년도 23회 정기총회 및 41회 학술발표회
• /
• pp.22-22
• /
• 1999

• 한국연초학회:학술대회논문집
• /
• 한국연초학회 2000년도 24회 정기총회 및 43회 학술발표회
• /
• pp.27-27
• /
• 2000

• 한국연초학회지
• /
• 제8권2호
• /
• pp.19-27
• /
• 1986

This experiment was carried out to investigate the effect of circulating air volume to chemical composition of tobacco leaves during the bulk curing. The results were as follows : The decrease of circulating air volume prolonged curing time as the case of a 0.058m3/min. kg; but, no remarkable changes with a 0.11m3/min. kg and a 0.083m3/min. kg. When the circulating air volume was decreased, compared with 0.11m3/min. kg, sugar content was increased while total nitrogen and nicotine content showed a reduced values. In case of a 0.058m3/min. kg and a 0.083m3/min.kg, solanone and damascenone were high. Some of volatile neutral constituents and volatile organic acids were increased during curing process ; especially, their quantities were remarkably increased during the midrib drying stage. As circulating air volume decreased the equilibrium moisture content was increased, while leaf shatter index and filling capacity were decreased.

• 대한치과의사협회지
• /
• 제57권3호
• /
• pp.162-168
• /
• 2019

Composite resin restorations in posterior teeth are increasing due to the aesthetic needs of patients and the development of materials. This trend will accelerate in line with domestic insurance policies. However, resin composites generate stresses due to their contraction during the polymerization process. To reduce the polymerization shrinkage stress of resin composites, incremental layering technique has been recommended for decades. This technique reduces stress at the cavity wall interface and allows a more efficient light curing of the material. Bulk-fill resin composites have been designed to simplify the restorative technique because they can be placed into cavities in a single increment of 4-5mm. The simplification of the operative procedures is desirable in clinical daily practice. In this context, bulk-fill resin composites are an attractive alternative for posterior restorations. However, a clearer understanding of the clinical performance of this relatively new class of materials in comparison to conventional resin composites is required. Based on previous studies, the aim of the current review was to present the clinical criteria for the use of bulk-fill composites in direct restorations of posterior teeth.