• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.4950-4955
• /
• 2012

A bolt manufacturing process is completed with continuous forging. Technical and economical success of each process will depend on the appropriate process design and metal mold design for each procedure. This study aims to analyze the moldings of first and second steps among the multi-step molding processes of SCM435 bolt by use of the finite element method in order to achieve the reasonable process. Since the processes of first and second steps analyzed by use of the finite element method consist of axial symmetry, the transformed configuration of material satisfy the dimensions expected in process. In addition, the uniflow line formed in material becomes smooth and consistent over the entire process. Therefore neither molding of material nor inherent defect is expected.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.515-519
• /
• 2004

A Propeller-Anemometer is an instrument used specifically, to measure the wind speed. The accurate measurement of the wind speed is vitally important such required by any weather stations. In this research, the measurand of the instrumentation was the rotational speed of the propeller and the instrumentation result or output data was wind velocity. The speed measured was recorded digitally in the computer by using specific software. A specific sensor used to measure a variable by converting information of the variable (rotational speed of the propeller) into a dependent signal such as electrical signal in form of voltage. The development of Propeller-Anemometer involved few sets of instrumentation process and equipment. It included three major parts, mechanical, electronics and computer. The main instrumentation processes were physical and signal interfacing, signal conditioning, logic interfacing, data transmission to computer and processing the data. Generally, this paper presents the overall concept and design of Propeller-Anemometer Instrumentation. However, an emphasis was mainly in designing and building the interfacing system, hardware and software. Basically, for the first phase of the development, this project designed and built the RS232 terminal using Peripheral Interface Controller (PIC), PIC16F873. The hardware can be interfaced to computer or other compatible devices. This routine converted input voltage from the circuit to speed (velocity) and transmitted them afterwards to the target device by using the RS232 transmission protocol. This implementation implied a computer display as visual interface. For the purpose of this paper, RS232 data transmission was carried out using a Microsoft Visual Basic software routine.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10b
• /
• pp.1705-1711
• /
• 1991

On-line fault detection and diagnosis has an increasing interest in a chemical process industry, especially for a process control and automation. The chemical process needs an intelligent operation-aided workstation which can do such tasks as process monitoring, fault detection, fault diagnosis and action guidance in semiautomatic mode. These tasks can increase the performance of a process operation and give merits in economics, safety and reliability. Aiming these tasks, series of researches have been done in our lab. Main results from these researches are building appropriate knowledge representation models and a diagnosis mechanism for fault detection and diagnosis in a chemical process. The knowledge representation schemes developed in our previous research, the symptom tree model and the fault-consequence digraph, showed the effectiveness and the usefulness in a real-time application, of the process diagnosis, especially in large and complex plants. However in our previous approach, the diagnosis speed is its demerit in spite of its merits of high resolution, mainly due to using two knowledge models complementarily. In our current study, new knowledge representation scheme is developed which integrates the previous two knowledge models, the symptom tree and the fault-consequence digraph, into one. This new model is constructed using a material balance, energy balance, momentum balance and equipment constraints. Controller related constraints are included in this new model, which possesses merits of the two previous models. This new integrated model will be tested and verified by the real-time application in a BTX process or a crude unit process. The reliability and flexibility will be greatly enhanced compared to the previous model in spite of the low diagnosis speed. Nexpert Object for the expert system shell and SUN4 workstation for the hardware platform are used. TCP/IP for a communication protocol and interfacing to a dynamic simulator, SPEEDUP, for a dynamic data generation are being studied.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6581-6589
• /
• 2013

This study reset the Examination Criteria for Energy Use Plan by the project sector so that the Consultation about Energy Use Plan would play an effective role in reaching the National Energy Policy Issues, and to prevent complaints from the superintendent of the project & agent engaged in the project. To achieve this aim, consultation case analysis was carried out from 2001 to 2010 and the National Energy Master Plan was reviewed. The predicted effect of energy savings calculated by reset Examination Criteria on the $1^{st}$ energy demand target at 2030 was 2.5%, the effect of new and renewable energy utilization on a new and renewable energy supply target at 2030 was 3% and the rate of $CO_2$ reduction to greenhouse gas emission BAU at 2020 was 1.1%.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.6
• /
• pp.241-250
• /
• 2019

Road signs are guide facilities for road users, and the Ministry of Land, Infrastructure and Transport has established and operated a system to enhance the convenience of managing these road signs. The role of road signs will decrease in the future autonomous driving, but they will continue to be needed. For the accurate mechanical recognition of texts on road signs, automatic road sign recognition equipment has been developed and it has applied image-based text recognition technology. Yet there are many cases of misrecognition due to irregular specifications and external environmental factors such as manual manufacturing, illumination, light reflection, and rainfall. The purpose of this study is to derive location-based destination names for finding misrecognition errors that cannot be overcome by image analysis, and to improve the automatic recognition of road signs destination names by using Levenshtein similarity verification method based on phoneme separation.

• Journal of the Korea Convergence Society
• /
• v.9 no.7
• /
• pp.47-53
• /
• 2018

The actual condition of safety management and problems for hazardous material facilities in national industrial complex are investigated and analyzed in fields of hazardous material facilities safety, fire fighting equipment safety, building safety, space safety. In most cases, the failure to comply with legal requirements and the maintenance of fire safety have been pointed out. As a result, the total number of problems identified was 466 and problems in the field of hazardous material facilities safety have been pointed out the most. Also, it was analyzed that the number of problems identified in the manufacturing facilities and general handling centers among the hazardous materials facilities was the highest. Therefore, it will contribute to strengthening the safety management capability of the national industrial complex in the future by suggesting the convergence direction of the safety diagnosis system and the systematic introduction of the precise safety diagnosis.

• PNF and Movement
• /
• v.15 no.2
• /
• pp.115-124
• /
• 2017

Purpose: Researchers found that blocks of evidence-based practice (EBP) implementation lacked opportunities for EBP education. The study found that physical therapists had negative views of research as well as their roles in EBP, lacked confidence in EBP, and had limited access to web-based materials. The purpose of this study was to highlight the importance of information research technology for efficient EBP in a clinical environment. Methods: The web-based information research technologies that should be used for sustainable EBP include: the clinical practice guideline (CPG) and PubMed's My NCBI service. Journal mailing services and other academic information sources should also be used to gather information from RSS feeds. An EBP library or archive must be created. A site that provides EBP-specific information is also needed. Results: We should usually do EBP. Practitioners must learn and use information technologies that will help them improve their EBP skills. Conclusion: Facilitating EBP implementation and building an EBP system require related education as well as a practical work environment and equipment. However, the highest priority is individual efforts and trial. Information technology will complement the lack of time. It is important to use information research technology to overcome real obstacles. Lasting EBP must use a number of web-based information research technologies to overcome the practical challenges encountered in EBP implementation.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.9
• /
• pp.389-400
• /
• 2020

A construction project is a designed product made up of labors, materials, and installations in the project positioned on the ground and may include the underground and ground section, and the section in water or on the water surface. It is a civil, industrial, transport, agricultural and rural development, infrastructure, or some other. A key phase in the life cycle of these construction projects is the implementation when building products are made directly with workers, equipment, materials, and managers. If there is a lack of management experience, information, and problem-solving solutions to tackle the risks faced by contractors, especially foreign ones, will fail in controlling the project's cost. This study was conducted with investigations, discussions, and evaluation of the factors that lead to cost overruns in the construction projects of international contractors in Vietnam. The principal component analysis (PCA) showed that those factors that influence cost overruns these construction projects fall into five general groups, including factors related to (i) the owners, (ii) the foreign contractors, (iii) the subcontractors and suppliers, (iv) state management, and (v) the project itself. Besides, the study proposes solutions to limit cost overruns in construction projects and improve the profitability of international contractors in Vietnam.

• Korean Institute of Interior Design Journal
• /
• v.19 no.3
• /
• pp.172-179
• /
• 2010

The Sydney Opera House is built on a peninsula of rock that juts out into Sydney Harbor. The site was once a landing place for ships. Utzon, Architect, designed the theatres for the Opera House to fit the shape. The two theatres were placed side by side so that they both had extensive harbor views. The Sydney Opera House is designed the foyers to take full advantage of these sights. Because the building would be seen from all sides, even from above, it was to be a piece of sculpture. The outside was as important as the inside. The audience enters from behind the stage and walks around to the foyers overlooking the harbour. The wing and backstage areas are small because of the way the foyers wrap around the theatre. The stage is made up of large platform lifts which provide the vertical movement for changing scenery. The sets come up from the workshops below stage. The flytower fits under the largest roof shell and doesn't break the skyline. The important elements are the podium, the shells and the reminders. The podium, the huge monolithic concrete structure, contains hundreds of rooms and nearly all the technical equipment. The podium is clad with pink granite slabs and seen from the water. This design eliminated a maze of fire escape stairs and, at the same time, gave people a wonderful view of the harbour. The egg shell is remarkably strong and express the form as the symbol of the site.

• Information and Communications Magazine
• /
• v.16 no.5
• /
• pp.114-127
• /
• 1999

Telecommunications provisions of the interior of a country which are established only for a voice service are inefficient in various rule of grounding and bonding that are not concerned with services. It is a essential part for planning out a efficiency when employing telecommunication, researching and writing standards bout grounding and bonding of materials that are established in telecommunication to consider reliability of telecommunication equipment for a wideband and high speed service. Therefore we investigated present conditions and problems of domestic grounding and observed foreign technical standards related to several grounding and bonding. The foreign technical standards are compared with the domestic immature parts. As a result, presenting a domestic technical standards about grounding and bonding fitted to telecommunicateion provision when building is constructed or reconstructed, all parts related to this can be given the efficiency and the generality to provide system which has reliability.