• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.51-52
• /
• 2023

Recently, heat island and dry island phenomena occur frequently due to land surface development and excessive energy consumption in urban areas. As a result, the surface temperature of the building and the entire temperature of its surroundings are increased, and as a result, the durability of the building is rapidly deteriorated. In order to suppress these causes, a method of maintaining the temperature of road heating wires was implemented as a temporary measure, but this did not predict climate change. Therefore, this study is a method to measure the compressive strength, density, and thermal conductivity of light weight concrete using waste glass foam beads. After fabricating a simple chamber, the temperature and humidity of the inside and outside were measured with an Arduino device in consideration of external factors. Therefore, if waste glass foam beads made through proper mixing are constructed in the urban center, the quality of the urban can be improved.

• 한국건축시공학회지
• /
• 제17권6호
• /
• pp.483-492
• /
• 2017

최근 국내에서는 다양한 형태로 연안이 개발되고 있다. 이에 따라 안전사고를 예방하고 경관을 저해시키지 않는 새로운 소파블록의 개발이 요구되고 있다. 회파블록은 상부가 평탄하여 친수공간으로 활용이 가능하지만, 구조 내부에 존재하는 회파관으로 인해 중량손실이 발생한다. 따라서 이에 대응하기 위해 중량콘크리트를 사용하여 파랑 저항성을 상승시킬 필요성이 있다. 이러한 목적을 위하여 본 연구에서는 동슬래그 및 자철석을 골재로 사용한 중량 콘크리트를 개발하고 이의 염해저항성을 평가하였다. 연구 결과에 따르면, 일반 골재와 중량골재를 각각 혼입한 콘크리트의 28일 압축강도는 큰 차이가 발생하지 않았으나, ASTM C1202에 의한 염소이온침투저항성 시험 시 자철석을 혼입한 콘크리트는 과도한 전류의 흐름으로 평가가 불가능한 것으로 나타났다. 그러나 염소이온의 침투깊이를 이용하는 NT Build 492 시험에서는 ASTM C 1202 시험법에서 관찰된 문제점 없이 실험 진행이 가능하였고, 동슬래그, 자철석을 골재로 사용한 중량 콘크리트의 염소이온침투저항성이 가장 우수한 것으로 나타났다. 따라서 동슬래그 및 자철석을 골재로 사용한 중량콘크리트는 회파블록에 적용이 가능할 것으로 판단된다.

• 태양에너지
• /
• 제12권3호
• /
• pp.1-9
• /
• 1992

본 연구에서는 건물의 계획 단계에서 각 부위별 일조환경의 정량적 검토 및 분석이 가능하도록 하기 위해, 월드램을 이용한 일조환경 분석기법과 일조시간표를 이용한 일조환경 분석을 제안하고, 이를 전산화하여 정확하면서도 빠른 시간내에 보다 과학적이고 정량적으로 판단할 수 있는 기법을 제시하였다. 본 연구에서 제안하는 기법이 어떠한 지역에서도 활용할 수 있도록 하기 위하여, 분석대상 부지의 위도에 따른 월드램 작성 과정을 전산화 한 뒤, 대상 건물을 선정하여 이에 대한 일조환경 분석기법을 다음과 같이 개발하였다. 1) 월드램 상에 대한 건물의 일조환경을 표현하기 위한 알고리즘을 제시하고, 이를 전산화하였다. 2) 월드램 상에 표현된 대상 건물의 일조환경 분석을 위한 일조 시간표 작성 알고리즘을 제시하고, 이를 전산화 하였다. 3) 두가지 설계 대안을 월드램에 동시에 표현하였을 때를 평가하기 위한 일조시간표 작성 알고리즘을 제시하고, 이를 전산화 하였다.

• ETRI Journal
• /
• 제28권3호
• /
• pp.347-354
• /
• 2006

The characteristic variation of 3-dimensional (3-D) solenoid-type embedded inductors is investigated. Four different structures of a 3-D inductor are fabricated by using a low-temperature co-fired ceramic (LTCC) process, and their s-parameters are measured between 50 MHz and 5 GHz. The circuit model parameters of each building block are optimized and extracted using the partial element equivalent circuit method and an HSPICE circuit simulator. Based on the model parameters, the characteristics of the test structures such as self-resonant frequency, inductance, and quality (Q) factor are analyzed, and predictive modeling is applied to the structures composed of a combination of the modeled building blocks. In addition, characteristic variations of the 3-D inductors with different structures using extracted building blocks are also investigated. This approach can provide a characteristic estimation of 3-D solenoid embedded inductors for structural variations.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.208-209
• /
• 2020

There is no disagreement that the construction sector will play an important role in inter-Korean economic development cooperation. However, very few studies have been made at North Korea's construction technology. North Korea shows a lot of differences from South Korea, from the quality standards of building materials to construction technology. It is clear that these differences will be a stumbling block to the promotion of construction projects in the inter-Korean cooperation stage. Therefore, the start of inter-Korean economic development cooperation should be preceded by work to clearly recognize each other's differences and lay the foundation for integration or compatibility. The purpose of this study is to compare the construction technology of rebar concrete construction. We compared the differences with Korea's construction method based on the construction books recently published in North Korea, and derived the characteristics of North and South Korea for each detailed process of reinforced concrete construction.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제27권2호
• /
• pp.189-191
• /
• 2001

Objective : The objective of this study was to determine which forms of iliac cancellous bone grafts better restore alveolar clefts. Study design : Forty consecutive patients who required a unilateral alveolar cleft graft were studied. Group I (20 patients) had reconstruction with iliac cancellous particulate bone grafts and group II (20 patients) had reconstruction with iliac cancellous block bone grafts. The two groups were evaluated radiographically and clinically. Results : The group with the block bone grafts showed less postoperative problems and better incorporation of the bone graft than the group with the particulate grafts. Conclusion : Surgical reconstruction of alveolar process defects in patients with alveolar cleft using iliac cancellous block bone is a more reliable method than particulate bone grafts both for closing the oronasal fistula and for building interalveolar septal height.

• 국제학술발표논문집
• /
• The 8th International Conference on Construction Engineering and Project Management
• /
• pp.75-84
• /
• 2020

Modular construction is a construction method whereby prefabricated volumetric units are produced in a factory and are installed on site to form a building block. The construction productivity can be substantially improved by the manufacturing and assembly of standardized modular units. 3D printing is a computer-controlled fabrication method first adopted in the manufacturing industry and was utilized for the automated construction of small-scale houses in recent years. Implementing 3D printing in the fabrication of modular units brings huge benefits to modular construction, including increased customization, lower material waste, and reduced labor work. Such implementation also benefits the large-scale and wider adoption of 3D printing in engineering practice. However, a critical issue for 3D printed modules is the loading capacity, particularly in response to horizontal forces like wind load, which requires a deeper understanding of the building structure behavior and the design of load-bearing modules. Therefore, this paper presents the state-of-the-art literature concerning recent achievement in 3D printing for buildings, followed by discussion on the opportunities and challenges for examining 3D printing in modular construction. Promising 3D printing techniques are critically reviewed and discussed with regard to their advantages and limitations in construction. The appropriate structural form needs to be determined at the design stage, taking into consideration the overall building structural behavior, site environmental conditions (e.g., wind), and load-carrying capacity of the 3D printed modules. Detailed finite element modelling of the entire modular buildings needs to be conducted to verify the structural performance, considering the code-stipulated lateral drift, strength criteria, and other design requirements. Moreover, integration of building information modelling (BIM) method is beneficial for generating the material and geometric details of the 3D printed modules, which can then be utilized for the fabrication.

• Journal of Radiation Protection and Research
• /
• 제16권1호
• /
• pp.15-24
• /
• 1991

CR-39 플라스틱 핵비적검출기를 라돈검출기로 내장한 멤브레인 필터컵(일명 : CR-39 라돈컵)을 이용하여 일부 국산건축자재의 라돈방출율을 측정하였다. 표준라듐선원을 이용한 라돈컵의 교정 실험을 수행하여 얻은 CR-39 검출기의 라돈검출인자는 $0.164{\pm}0.005(tracks \;cm^{-2}/Bq\;d\;m^{-3})$였으며 타 연구자들의 발표결과와 잘 일치하였다. 일부 건축자재(모래벽돌, 적벽돌, 화장석판, 콘크리트 덩어리, 건물바닥과 내벽)에 CR-39 라돈컵을 2개월 동안 기밀 부착하여 라돈방출율을 측정한 결과, 라돈방출율은 모래벽돌에서 평균$(75.0{\pm}5.5){\times}10^{-6}(Bq/m^2-s)$, 화강석판에서 $(6.8{\pm}2.9){\times}10^{-6}Bq/m^2-s)$로 10배정도의 차이를 보였으며, 모래벽돌>콘크리트바닥>콘크리트덩어리>건물벽>적벽돌>화강석 판의 순서를 보였다. 본 연구 결과, CR-39 라돈컵에 의해서도 건축자재의 라돈방출율을 효과적으로 측정할 수 있음이 입증하였다.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2006년도 정기학술발표대회 논문집
• /
• pp.654-658
• /
• 2006

옥상방수의 기존 습식공법에서 나타나는 문제점을 해결하기 위하여 옥상마감 누름층을 기성 콘트리트 블럭으로 대체하여 시공함으로써 방수하자에 따른 과잉비용을 줄이고 증축이나 개보수시 자재의 재활용을 유도할 수 있는 방안의 필요성이 대두되고 있다. 이에 따라 본 연구에서는 제안된 옥상 외단열방수 건식화 공법에 대한 성능평가 항목 중 단열성능을 중심으로 실험을 통하여 종합적인 정량평가 및 분석을 실시함으로써 향후 건식화 공법의 시공 및 활용을 위한 기초자료를 제공하고자 한다. 그리고 건축물의 옥상단열방수에 있어서 발생되고 있는 하자의 원인분석 및 이에 따른 개선방안을 제시하고 수많은 단열방수재료와 다양한 공법 가운데서 건축물의 요구 성능에 가장 적합한 선정방법을 단계별 주요인자의 중요도에 따라 분류함으로써 건축물의 용도, 특성 및 중요도에 따른 공법, 구법 선정이 가능하도록 하였다.

• 한국CDE학회논문집
• /
• 제18권1호
• /
• pp.10-20
• /
• 2013

The Yoon Jeung residence is a well-known and prototypical aristocratic house example showing typical and interesting characteristics of the traditional houses in the middle region of Korea. When it comes to understanding the architectonic characteristics of a Korean traditional house, it was not easy to actually capture the compositional and/or constructional knowledge of the building even though it is a wooden building with many wooden members showing their compositional relations. Now with the help of the BIM tool, the Building Information Modeling tool, we could actually be able to compare and analyze each member and their compositional relations. In this paper we examine the unique traditional composition method used in extending the building's structural sections utilizing the bended-joint characteristics of traditional buildings with exemplar case of the Yoon Jeung residence. Thereby we examine those relationships among three major compositional parts namely the plan based spatial compositions, the upper wooden compositions and the roof forms so as to specify the building's typical characteristics with reasonably acceptable causes. The inner and outer block of the residence are handled with their bended-joints with more detailed knowledge of categorization by way of joint relationships among members.