• 대한조선학회논문집
• /
• 제43권1호
• /
• pp.103-118
• /
• 2006

At the initial design stage, the generation process of the production material information of a building block and the simulation process of the block erection, which are required to perform the production planning and scheduling, have been manually performed using 2D drawings, based on the data of parent ships, and subjective intuition from past experience. To make these processes automatic, the accurate generation method of the production material information and the convenient simulation method of the block erection based on the initial hull structural model(3D CAD model), were developed in this study. Here, the initial hull' structural model was generated from the initial hull structural CAD system early developed by us. To evaluate the developed methods. these methods were applied to corresponding processes of a deadweight 300,OOOton VLCC. As a result. it was shown that the production material information of a building block can be accurately generated and the block erection can be conveniently simulated in the initial design stage.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.64-68
• /
• 2004

Design of manufacturing system is a very complicated and tricky process. Since no efficient method has been known, yet it has been mainly done based on experience and heuristics. Even mostly used simulation approaches can only evaluate the performance of an already configured system, but cannot provide a help to configure or reconfigure a manufacturing system. An efficient way to (re-)configure manufacturing systems might be to use building blocks of a manufacturing system in the similar manner the recent products are configured based on modular principle. In this paper, the concept of a building block and its representation method are described. An example of assembly system configuration is also given.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2009년도 춘계학술논문발표회 논문집
• /
• pp.570-575
• /
• 2009

본 논문에서는 피난해석에 사용되는 BuildingEXODUS code의 HAZARD에 피난의 환경 조건으로서 화재모사전용 FDS code의 계산결과를 직접 피난의 환경조건으로 생성하는 프로그램 개발 내용을 다루었다. 계산결과의 변환과정에는 수치기법이 적용되었으며, FDS의 Single Block 또는 Multi-Block Meshes에도 적용이 가능하도록 하였다. 본 프로그램의 개발로 피난해석 수행 시 대규모의 화재해석데이터의 입력의 편리성을 높이고, 화재에 대한 피난 해석 과정을 단축하게 되었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.29-30
• /
• 2018

Recent impervious pavements on roads and sidewalks cause rainwater to not penetrate into the ground, deplete groundwater, or flood the rivers, causing urban flood damage. In order to solve these problems, the amount of installed pitcher block is increasing, but the existing pitcher block is made with cement base and causes many problems. In the cement permeable block, the efflorescene phenomenon occurs due to the acid component, and the pore of the permeable block is clogged and the permeability is lost. As a result, the service life of the pitcher block is shortened and the replacement period is shortened. The purpose of this study is to analyze the basic properties of polymer concrete by replacing cement with polymer in order to solve the problem of cement - based concrete permeable block.

• 한국환경복원기술학회지
• /
• 제7권1호
• /
• pp.1-9
• /
• 2004

Caused on the excessive heat accumulation of concrete material, the indoor thermal environment of reinforced concrete building is so bad in Okinawa. As the interruption of solar radiation could be one of the methods to improve it, the purpose of this study is to find out the effect of adopting solar radiation interrupting materials -Solar insulating block, Grass, and both of them- for the improvement of thermal environment. As the result, it was found that grass on the solar insulating block which has an air layer obviously improved the indoor thermal environment of RC building which was applied to. And it was found that the systems have an effectuality on heat island phenomenon simultaneously. It could be proposed as a good system which improve the indoor thermal environment of the existent houses.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.603-607
• /
• 2009

About a Structure is performance external insulation is fundamantal performance for enrgy-saving. these day, most of residential structures have constructed by internal insulation method structure. The method structure internal insulation have construction and economical efficiency, but on the other hand, be generated heat loss by heat bridge especially, be generated loss heat-energy logical consequence in structure ondol. The external insulation structure method has a mert able to minimum to loss heat about heat-bridge. But the external insulation technique is unsatisfactory statues within the know-how and method of construction and materials compared with developed countries. The recently, the requirement of market related to the external insulation technique is resulted by the energy efficiency system, but it can lead to the lack of alternative technique In study on the korea type passive house building design for insulation block method of wall system has to experimental characteristic heat-energy of practice building. In result field-experimental, the heat-bridge appeared to characteristic spent heat-energy of blow 2L class and have a suffience performance it.

• Journal of Photoscience
• /
• 제8권2호
• /
• pp.71-71
• /
• 2001

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.271-273
• /
• 2005

In this paper, The experiment is performed for using reinforced building of foundation as a down conductor and a substitutional earth electrode. It is shown that earth resistance is influenced by mortar block resistance and concrete resistance more than the change of the resistance which is about steel reinforcing volume in all of the mortar block model and concrete block model.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.212-213
• /
• 2017

The study investigated the fluidity and compressive strength of non-cement porous block using blast furnace slag powder to reduce CO₂ in the construction industry.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권2호
• /
• pp.117-125
• /
• 1997

상계요소 해석(UBET) 프로그램은 비대칭 단조공정에서의 다이 충만과정과 단조 하중등을 예측하기 위하여 개발되었다. 보다 용이하게 단조 공정을 해석하기 위하여 비대칭 형상의 단조공정을 평면변형부(길이 부분)과 축대칭변형부(라운딩 부분)으로 나누었다. 평면변형부와 축대칭 변형부의 경계는 전단에너지를 고려하여 결합하는 빌딩 블록 방법(building block method)을 이용하였다. 그리고 본 연구의 비대칭 형상을 단조하는데 최적의 초기시편 형상으로 아령형의 시편(dumbbell-typed billet)을 제시하였다. 또한 실험은 상온에서 플라스티신을 사용하여 수행되었고 수치해석 결과와 실험결과는 비교적 잘 일치하였다.상계요소 해석(UBET) 프로그램은 비대칭 단조공정에서의 다이 충만과정과 단조 하중등을 예측하기 위하여 개발되었다. 보다 용이하게 단조 공정을 해석하기 위하여 비대칭 형상의 단조공정을 평면변형부(길이 부분)과 축대칭변형부(라운딩 부분)으로 나누었다. 평면변형부와 축대칭 변형부의 경계는 전단에너지를 고려하여 결합하는 빌딩 블록 방법(building block method)을 이용하였다. 그리고 본 연구의 비대칭 형상을 단조하는데 최적의 초기시편 형상으로 아령형의 시편(dumbbell-typed billet)을 제시하였다. 또한 실험은 상온에서 플라스티신을 사용하여 수행되었고 수치해석 결과와 실험결과는 비교적 잘 일치하였다.