• KIEAE Journal
• /
• 제13권5호
• /
• pp.79-88
• /
• 2013

This study creates the evaluation criteria to analyze the $CO_2$ emission quantity in the complex of apartment house among domestic buildings and proposes how to calculate the $CO_2$ emission quantity by the only simple information of apartment house. The study shows that in order to create the index of carbon emission evaluation criteria, $CO_2$ emission quantity for its input materials in these 27 apartment houses are 445,412g-$CO_2/m^2$ for apartment building, 474,322g-$CO_2/m^2$ for the basement parking lot, 483,523g-$CO_2/m^2$ for welfare facility, 729,957g-$CO_2/m^2$ for sales facility, 743,560g-$CO_2/m^2$ for other facility, 26,782g-$CO_2/m^2$ for public facility, 43,659g-$CO_2/m^2$ for landscape, 1,113g-$CO_2/m^2$ for indoor facility, 11,251g-$CO_2/m^2$ for outdoor facility and 891g-$CO_2/m^2$ for common temporary based on the average $CO_2$ emission by facility. We can also see the analysis data that in case of using the selected factors only, the rate of error is 7.51% comparing with the emission quantity by using simplified LCA method this study suggests for the whole range of apartment houses and the rate of error is average 3.24% using selective and main materials. And this it is evaluated that we can get the result which is similar to the actual $CO_2$ emission quantity with only the simple information about the apartment house.

• 한국건축시공학회지
• /
• 제22권1호
• /
• pp.1-10
• /
• 2022

최근 이상 기후에 의한 국지성 집중호우, 폭염 등의 빈번한 발생으로 통합적인 빗물관리 시스템의 도입이 필요하다. 따라서, 빗물침투와 저류를 동시에 구현함으로써 집중강우에 대한 홍수방지 뿐 아니라, 빗물침투를 통한 지하수위를 확보할 수 있는 경제적이며 친환경적인 빗물침투저류시설의 개발이 요구되고 있다. 본 연구에서는 황토를 포함한 친환경 무기질 결합재를 이용하여 만들어진 친환경 빗물침투저류시설의 구조적 안전성에 대해 검토했다. 상시하중과 부가적인 수직하중을 고려한 정적해석과 지진 스펙트럼을 고려한 동적해석을 수행했다. 그 결과, 본 연구에서 개발한 친환경 조립식 빗물 침투형 저류시설은 기존의 PE 블록 빗물저류시설과 비교하여 동일 하중조건 및 지진조건 하에서 발생되는 최대응력은 약 68.1% ~ 75.4%, 최대변위는 약 0.9% ~ 9.6% 수준으로서 우수한 구조적 안정성을 확보하는 것을 확인할 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.875-878
• /
• 2006

In the case of a vibration sensitive equipment, it require a vibration free environment to provide its proper function, therefore, it is very important to predict precisely vibration environment of microelectronics production facility due to adjacent blast work. However, it is not easy to evaluate a quantitative vibration response of structure due blast because it can be determined by the characteristics of vibration sources, propagation through rock and soil and dynamic properties of building. In this paper, vibration influence evaluation of micro-electronic Production building induced from adjacent blast activity was performed by real measurement data obtained on ground and structure at same time. And blast vibration allowable limit on ground was supposed by measurement data analysis in order to avoid operation error of precision equipments

• 교육시설 논문지
• /
• 제24권1호
• /
• pp.3-10
• /
• 2017

This study is to analyze the remodeling method of library in terms of space extension method and urban regeneration by repurposing function in unused facilities through case study. In many case of library extension, horizontal extensions are more frequent than vertical extensions, because there are limits to extend vertically due to high live load estimation by book stacks. Extension schemes was organized by new building extension method in connection with existing buildings, attaching method small scaled mass or linear mass to existing building, connecting method a plurality of existing small buildings, vertical extension method on the top of the structure, underground extension method using special structure. Unused facility remodeling to the library, large scaled buildings can be developed completely to the function of the library through the relocation of the space, while small scaled building needs spatial extension. In the case of spatial extension, existing space that was used for other purposes can be used as a reading room or office, avoiding high live load estimation.

• 교육시설
• /
• 제15권6호
• /
• pp.39-46
• /
• 2008

The main purpose of this study is to find out the strengths and weaknesses of the application of BIM to the educational facilities. All the data information is drawn from the integrated design process which links various fields such as energy simulation, structure analyzation, and etc, and it is applied to the project combined as one data set. Moreover, we analyze the possible problems of the data exchange that can happen as collaborating with various fields while working on the project, and we present its solutions and the futher studies on this matter of a project.

• 한국태양에너지학회 논문집
• /
• 제34권3호
• /
• pp.122-132
• /
• 2014

Sustainability became the keyword of our society worldwide, and it is undoubtful that buildings are mainly responsible for green house gas emission and energy consumption. Among different project types, educational facility was selected in this study to find out what needs to be addressed in order to provide students better learning environments. Scorecards from 32 LEED certified school projects went through analysis and essential components as design strategies in sustainable educational facilities were extracted based on application rate of each credit in LEED for School(2009). The extracted data were further analyzed in comparison with related components in G-SEED. The results would be used as guidelines for those of who design sustainable education facilities and prepare green building certifications. and it would further foster architect's responsibility towards green society in Korea.

• 지질공학
• /
• 제25권4호
• /
• pp.439-447
• /
• 2015

In this study, specific sections vulnerable to debris flow damage were selected, and a complete enumeration survey was performed for the sections with debris flow hazards. Based on this, the characteristics of the sections with debris flow hazards and the current status of actions against debris flow were examined, and an efficient installation plan for a debris flow damage prevention method that is required in the future was suggested. The results indicated that in the Route 56 section where the residential density is relatively higher between the two model survey sections, facilities for debris flow damage reduction were insufficient compared to those in the Route 6 section which is a mountain area. It is thought that several sites require urgent preparation of a facility for debris flow damage reduction. In addition, a numerical analysis showed that for debris barriers installed as a debris flow damage prevention method, distributed installation of a number of small-scale barriers facilities within a valley part was more effective than single installation of a large-scale debris barrier at the lower part of a valley.

• 대한안전경영과학회지
• /
• 제18권4호
• /
• pp.11-17
• /
• 2016

Currently, the number of a shopping center building is increasing because most people want to go a shopping center building easily for buying many things and eating some foods. That are a normal trend these days. However, the increasing number of shopping center buildings has been increasing the number of shopping center building fires which also have been making social problems. Therefore, this study was conducted for the fire department connection among other fire facilities because it is important for fire suppression. The research subject is on the fire department connections that are on 70 shopping center buildings of more than 5 years old constructed. Survey and analysis were conducted for 70 fire department connections. The result of this study is that all installed fire department connections have a type that includes one or two holes each at 65mm wide, and the average distance between fire department connections and access roads is 4.85m. The total average percentage of insufficiency conditions such as drive ways for fire trucks, visibility, accessibility, pressure range sign, installed height, cover of the hole, etc. is 45.3%. So improvement of law and systems, that are fire facility construction and maintenance implementations, will be needed in my opinion.

• 한국조경학회지
• /
• 제32권1호
• /
• pp.1-9
• /
• 2004

This study is focused on finding out the character of urban recreation forest and investigating facilities regulations of forest resources around urban areas to meet future recreation needs. The method of this study is to compare urban recreation forests with similar facilities like urban parks and natural recreation forests. By this way, this study not only identifies the characteristics of urban recreation forest as emerging recreational facility, but also outputs regulations that can be adapted to real environment. Urban recreation forest is defined as follows: It has forest with good natural landscape and easy access. It makes emotion rich and its function is focused on outdoor recreation nature education, and experiences for family group mainly within a day or on weekends. This study suggests that the minimal area of urban recreation forest should be over 100,000$m^2$, with a facility ratio less than 20%. Building coverage should be less than 7% when the urban recreation forest is under 300,000$m^2$, less than 5％ when 300,000∼500,000$m^2$, and less than 3％ when over 500,000$m^2$ The limits of building height is 3 stories, or under 12m. This study finds out the character, the needs of urban recreation and the criterion for project feasibility. significance of the result is supplying theoretical basement on related regulation. Based on the results, further study will establish landscape management method and legislation & application in a detailed examination.

• 한국실내디자인학회논문집
• /
• 제17권6호
• /
• pp.170-177
• /
• 2008

This study starts off by stating that the lack of awareness in the importance of reasonable and systematized layout in management facility is essentially working against building a quality public library. And that there is a merit in studying the spatial elements, its density, amount of needed space, and the likes to efficiently deal with present workings of the library which are becoming more dynamic and complicated. This paper seeks to embark on this study and also to provide a foundational data for research on management facility of the public library. The paper bases its research on 10 public libraries which are located in Seoul City and in Gyeonggi province, and are built after the year 2000. The paper focuses on the spatial distribution by section and allotment of management facility space in the library. Consequently, to find solutions or to suggest improvements on problems encountered, the paper introduces Japan's cases (4 recently-built public libraries) as a foreign case study. With foregoing domestic and foreign library case analyses, and the survey results of managerial staffs' demands, the paper seeks to provide basic data about management facility space and its floorplan of the public library. The paper bases its research on pubic libraries' management facilities, and expects to contribute to the efficient building of the public library in the future.