• Journal of the Korean Society for information Management
• /
• v.34 no.1
• /
• pp.341-371
• /
• 2017

Recently, the web service environment has changed from document-centered to data-oriented focus, and the Linked Open Data (LOD) exists at the core of the new environment. Specific procedures and methods were examined to build the LOD of records information in accordance with this trend. With the service sustainability of small-scale archive in consideration, an exemplification on LOD building process by utilizing open source software was developed in this paper. To this end, a 5-step service framework for LOD construction was proposed and applied to a collection of diary records from 'Human and Memory Archive'. Proof of Concept (POC) utilizing open source softwares, Protege and Apache Jena Fuseki, was conducted according to the proposed 5 step framework. After establishing the LOD of record information by utilizing the open source software, the connection with external LOD through interlinking and SPARQL search has been successfully performed. In addition, archives' considerations for LOD construction, including improvement on the quality of content information, the role of the archivist, were suggested based on the understanding obtained through the LOD construction process of records information.

• Journal of the Korea Concrete Institute
• /
• v.19 no.4
• /
• pp.467-474
• /
• 2007

In this paper, a total of 13 beams with bonding, anchorage system, amount of prestressing and span length as variables of experiment were tested in flexural test and analyzed in finite element analysis; one control beam, two simplified FRP-boned beams, four prestressed FRP-unbonded beams and four prestressed FRP-bonded beams. Also, a nonlinear finite element analysis of beams in the flexural test is performed by DIANA program considered material nonlinear of concrete, reinforcement and the interfacial bond-slip model between concrete and CFRP plates. The failure mode of prestressed CFRP plated-beams is not debonding but FRP rupture. RC members strengthened with external bonded prestressed CFRP plates occurred 1st and 2nd debonding of the composite material. After the debonding of CFRP plates occurs in bonded system, behavior of bonded CFRP-plated beams change into that of unbonded CFRP-plated beams due to fix of the anchorage system. Also, It was compared flexural test results and analytical results of RC members strengthened with CFRF plates. The ductility of beams strengthened by CFRP plates with the anchorage system is considered high with the ductility index of above 3. Analysis results showed a good agreement with experiment results in the debonding load, yield load and ultimate load.

• Spatial Information Research
• /
• v.23 no.4
• /
• pp.47-56
• /
• 2015

Recently, there has been an increase in the number of people who use the smart-phone navigation for using various latest functions such as group driving and location sharing. But smart-phone has a limited storage space for one application, since a lot of applications with different purposes are installed in the smart-phone. For this reason, road network data with a large space of memory used for map matching in the device for navigation cannot be stored in the smart-phone for this reason map matching is impossible. Besides, smart-phone which doesn't use the external GPS device, provides inaccurate GPS information, compared to the device for navigation. This is why the smart-phone navigation is hard to provide accurate location determination. Therefore, this study aims to help map matching that is more accurate than the existing device for navigation, by reducing the capacity of road network data used in the device for navigation through format design of a new road network and conversion and using a database of driver's driving patterns. In conclusion, more accurate map matching was possible in the smart-phone by using a storage space more than 80% less than existing device at the intersection where many roads cross, the building forest that a lot of GPS errors occur, the narrow roads close to the highway. It is considered that more accurate location-based service would be available not only in the navigation but also in various applications using GPS information and map in the future Navigation.

• Korean Journal of Social Welfare
• /
• v.65 no.2
• /
• pp.179-201
• /
• 2013

Since the 1960s, Korean welfare regime has been characterized by developmental welfare regime, of which invisible welfare programs like relation-based welfare are one of core elements. Developmental welfare regime of Korea has been dismantled after 1990s by the internal and external pressures. Focusing on the declines of relation-based welfare, this study examines the dismantle of developmental welfare regime of Korea. Since the late-1990s, the roles of inter-family income transfer and public income transfer are significant changed in terms of each share of total household income and each contribution of poverty alleviation. In other words, the role of public welfare has been growing while that of relation-based welfare has been decreased in the last twenty years. For the sake of a successful welfare regime transition in Korea, redistributional function of public welfare is quite important, but the development of reciprocal social economy and open community are also needed. Because, at this time and in this place, traditional welfare state building strategy is not proper in many aspects. However, it is impossible to achieve the development of reciprocal open community by restoration of relation-based welfare which has been already declined. This study regards enlargement of social economy or third sector as a development of reciprocal open community, and insists that cooperatives are especially worthy of notice.

• Korean Journal of Childcare and Education
• /
• v.11 no.3
• /
• pp.103-127
• /
• 2015

This study is based on the criticism against life contempt tendency in the educational environment of our society. The purpose of this study is to find out the perception and expectation about the realities and formations of partnership between the home and early childhood educational setting of parents and teachers. The ultimate aim is to build a foundation which transforms educational settings into warm educational communities. The research participants were 4 mothers whose children attended the setting and 4 teachers of the early childhood educational setting (8 participants in total). The research results were as follows. The perception of the realities about partnership of parents and teachers was sub-categorized into four categories: 1)"partnership": essential aspect in children's positive development, 2) practicing with vague concepts, 3) lacking the awareness of companion or partnership, 4) disturbing cooperation between parents and teachers from external issues and problems. The expectation of parents and teachers about formation of partnership between home and early childhood educational setting was sub-categorized into five categories: 1) building of community consciousness for better partnership, 2) developing empathy and communication skills between parents and teachers for mutual understanding, 3) considering various strategies to promote partnership with different styles of parents, 4) activating teacher training and parent education in link with local universities and on-line, 5) providing support from the national level to establish new relationships between home and educational settings. Consequently, it will lead early childhood education settings to be transformed into warm educational communities which orientate respect for life.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.3
• /
• pp.1-10
• /
• 2012

The purpose of this study was to promote the utilization of wind velocity of kitchen and bathroom exhaust ducts for wind power generation in high-rise apartments. The research content can be summarized as follows: 1) Nine high-rise apartments were examined for the installation of kitchen and bathroom exhaust ducts located in the pipe shaft (PS) section. After selecting simulation candidates, a simulation was performed with the STAR-CCM+ Ver 5.06 program. 2) Of nine high-rise apartments, seven had kitchen and bathroom exhaust ducts, whose cross section was in the range of $0.16m^2{\sim}0.4m^2$. The area ratio between the exhaust ducts and PS section (cross section of exhaust duct/area of PS section ${\times}$ 100) was on average 3.2%. 3) The simulation results were analyzed. As a result, the smaller cross section kitchen and bathroom exhaust ducts had, the more advantages there were for increasing exhaust wind velocity. If an out air inlet duct is installed to the old kitchen and bathroom exhaust ducts, it will increase exhaust wind velocity by 3.01~3.98m/s and contribute to the proper wind velocity level (3.0m/s). 4) When the simultaneous usage rate between the kitchen and bathroom exhaust fan increased from 20% to 60%, exhaust wind velocity increased. The "entire house holds" condition for exhaust fan operation provided more even exhaust wind velocity than the "some house holds" condition. 5) Exhaust wind velocity increased in the order of amplified (T-3), induced (T-2) and vertical (T-1) top of kitchen and bathroom exhaust ducts. Of them, the amplified type (T-3) was under the least influence of external wind velocity and thus the most proper for kitchen and bathroom exhaust duct tops.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.5
• /
• pp.13-21
• /
• 2013

Super high-rise buildings of combined use such as large shopping malls and multiplex etc. have larger parking facilities than general buildings and are characteristic of an increase in the number of the entrance and the exit connecting internal external space of the parking lot. These features cause a congestion of internal traffic by increasing car driving distance in the parking lot, and vehicle idling increases by drivers wander the parking lot in order to find parking space. In addition, they make drivers suffer from lots of difficulties due to parking including increasing their walking line after parking. Therefore, in this study, we developed individual parking information provision algorithm to specify the optimal parking place for drivers according to the purpose of visiting a building and the drivers' moving path, and selected new construction site for the second lotte world in order to evaluate the algorithm developed and performed evaluation. As a result of the evaluation, it was analyzed that in the case of applying the individual parking information provision algorithm compared to the existing parking information provision algorithm, moving distance in the parking lot decreases around 7.43~83.4%, and that in the case of $CO_2$ emission, it decreased about 47.7% on average, which indicates that the efficiency resulted from application of the individual parking information provision algorithm is very high as the application effects are tested.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.10 no.6
• /
• pp.187-202
• /
• 2015

The continued development of smart devices representing smart phones and tablet PC has made significant changes to the ICT ecosystem. Along the development of smart devices, consumers' needs are also becoming increasingly diversified in addition to their rising expectations. Thus, in order to fulfill the changing customer needs, corporations in the ICT ecosystem have recently focused on appcessory products that are interlinked and utilized in existing smart devices. This study particularly analyzes the two corporations, Samsung Electronics and SK Telecom, which recently plunged into appcessory business. By the case study of these two companies based on the theories of ecosystem and platforms, this study analyzes the current status of the appcessory market, the potentials and significances of the business, business background of the two corporations, and the status of leadership competition in the appcessory market. In the case of Samsung Electronics and SK Telecom, the study shows that both corporations acquired new growth powers in the appcessory market with their entry into existing or other relating markets. Also, since the appcessory business is highly related to their existing businesses, each company was able to take advantages based on the capability that they already possessed and this relationship had positive effects on their overall businesses. In addition, the two corporations had common strategies in increasing their competitiveness by identifying internal weaknesses and building external cooperations. On the other hand, since the two companies have different business areas, their business background, business strategies, and the effects of expectations varied to each other. Thus, this study identifies commonalities and differences between recent smart platforms and corporations' engagement in the fierce leadership competition in the appcessory market.

• Journal of East Asia Management
• /
• v.1 no.1
• /
• pp.29-49
• /
• 2020

In an intensively competitive global market, small-and medium-sized firms are puzzled about how to develop sustainable competitive advantages against global rivalries, thus leading satisfactory economic performance. However, despite the roles and contributions of such small-and medium-sized firms in the local community and national economies in Japan, little guidance has been offered to the practical issues related to their strategic behaviors toward global management. To fill this notable knowledge gap, this study aims to investigate the conditions in which how Japanese small-and medium-sized could dominates global market, which is one of key challenges in the literature of small business and entrepreneurship. To obtain better insights to this research area, this study undertakes an in-depth interview survey with I.S.T (Industrial Summit Technology) Corporation that shows off the highest global market share (40 per cent) with seamless polyimide tube product widely used in office automation equipment (e.g., copiers and printers). This method of survey is designed to deeply understand historical considerations about how I.S.T Corporation could dominate in the global market of such seamless polyimide tube product. Based on findings drawn from an interview, this study identifies five major factors enabling I.S.T Corporation to be a competitive global hidden company: vision sharing through founder's entrepreneurship, core competence, strategic network, risk management, and employee engagement. Specifically, to become a global hidden champion, sharing the vision motivating employees to partake in shaping company's future will be the first step on the road to global success through founder's entrepreneurship. However, in order to achieve such a vision, the importance of company's core competence cannot be overemphasized, which differentiates your customer solution with those of competitors. As such, a group of experts will be naturally formed and demonstrates your expertise in the global market, thereby building sustainable competitiveness. On the other hand, to maintain sustainable competitiveness, it is necessary to make up for the weaknesses small-and medium-sized firms suffer from competitive resources while strengthening their own strengths through strategic networks with external organizations. Here, every company has to understand the critical role of risk management, which is essential in this process of being global company so as not to lose your own strengths. Last but not least, do not forget the significant effects of employee engagement in firm performance. To enhance employees' engagement, a company has to create an ideal organization culture which fits into company's history and personality. In doing so, such organization culture can allow the vision and strategy to be implemented into detailed business tactics while facilitating employees to challenge the status quo by experimenting with creative ideas.

• The KIPS Transactions:PartD
• /
• v.18D no.6
• /
• pp.481-492
• /
• 2011

Recently, various mobile services are provided by the spread of wireless network infrastructures and smart devices. The improvement of cloud computing technologies increases the interests for enterprise mobile cloud services in various IT companies as well. By increasing the interests for enterprise mobile cloud services, it is necessary to evaluate the use of enterprise mobile cloud services. Therefore, the factors which affect the user acceptance of enterprise mobile cloud services are analyzed on the basis of Davis' technology acceptance model in this research. As analysis results, four external variables have significant effects on perceived ease of use of mobile cloud services. Also, these variables indirectly affect attitude toward using cloud services. The results show that the security is the most important factor for attitude toward using enterprise mobile cloud services. The service users also consider the interoperability as an important factor for the user acceptance of cloud services. The perceived ease of use has more contribution than the perceive usefulness on attitude toward using enterprise mobile cloud services. This research has both industrial and academic contributions because it provides the guideline to companies for introducing the enterprise mobile cloud services and apply the technology acceptance model on new IT services.