• Journal of Environmental Impact Assessment
• /
• v.20 no.3
• /
• pp.299-311
• /
• 2011

The objective of this paper is to present a methodology for the classification of spatial patterns considering the parameters of urban form which play a significant role in the formation of the urban climate. The urban morphological parameters, i.e. building coverage, impervious pavement, vegetation, water, farmland and landuse types were used to classify the spatial patterns by a K-means cluster analysis. And the presented methodology was applied on Changwon city, South Korea. According to the results of cluster analysis, the total spatial patterns were classified as 24 patterns. First of all, The spatial patterns(A-1, A-2, A-3, B-1, B-2, B-3, C-1, C-2, C-3, D-1, D-2, D-3, E-1, E-2, E-3, F-1, F-2, F-3, G-1, G-2, G-3), which distributed in the rural area and the suburban area, can have the positive impacts of cold air generation and wind corridor on an urban climate environment, were distributed in the rural area. On the other hand, the spatial patterns of the downtown area including A-4, B-4, C-4 and D-4 are expected to have the negative impacts on urban climate owing to the of artificial heat emission or the wind flow obstruction. Finally, it will require the future research to analysis the climatic properties according to the same spatial patterns by the field survey.

• Atmosphere
• /
• v.29 no.2
• /
• pp.131-147
• /
• 2019

On the urban scale, Micro-climate analysis models for urban scale have been developed to investigate the atmospheric characteristics in urban surface in detail and to predict the micro-climate change due to the changes in urban structure. BioCAS (Biometeorological Climate Impact Assessment System) is a system that combines such analysis models and has been implemented internally in the Korea Meteorological Administration. One of role in this system is the analysis of the health impact by heat waves in urban area. In this study, the vegetation cooling models A and B were developed and linked with BioCAS and evaluated by the temperature drop at the vegetation areas during ten selected heat-wave days. Smaller prediction errors were found as a result of applying the vegetation cooling models to the heat-wave days. In addition, it was found that the effects of the vegetation cooling models produced different results according to the distribution of vegetation area in land cover near each observation site - the improvement of the model performance on temperature analysis was different according to land use at each location. The model A was better fitted where the surrounding vegetation ratio was 50% or more, whereas the model B was better where the vegetation ratio was less than 50% (higher building and impervious areas). Through this study, it should be possible to select an appropriate vegetation cooling model according to its fraction coverage so that the temperature analysis around built-up areas would be improved.

• Journal of Advanced Navigation Technology
• /
• v.23 no.1
• /
• pp.90-96
• /
• 2019

LPWA is a cost-effective and time-saving technology with wide coverage. However, the LPWA is an ISM band that uses UHF radio waves, and its performance is very poor indoors because of its strong linearity. But, because of the possibility of achieving high performance compared to other communication in the room, this paper has studied the indoor communication performance by applying LoRa in LPWA technologies. After installing the data receiving module on the 4th floor, the transmission module was placed at the end of the building from the same floor to the 1st floor, and the data was collected. As a results, it installed on the 1st floor can be collected data with 98 ~ 99% probability, and the lowest RSSI is about -116dBm. Thus, considering the specification of LoRa with a maximum reception sensitivity -136dBm when the spreading factor is 12, the application of LPWA in the industrial field can be fully considered.

• International journal of advanced smart convergence
• /
• v.8 no.2
• /
• pp.109-115
• /
• 2019

Currently, LPWA(Low Power Wide Area) communication technology is widely used due to the development of IoT(Internet of Things) technology. Among the LPWA technologies, LoRaWAN(Long Range Wide Area Network) is widely used in many fields due to its wide coverage, stable communication speed, and low-cost modem module prices. In particular, LoRa(Long Range) can easily construct LoRaWAN with a dedicated gateway. So many organizations are building their own LoRaWAN-based networks. The LoRaWAN Gateway receives the LoRa packet transmitted from an End-device installed in the adjacent location, converts it into the Internet protocol, and sends the packet to the final destination server. Current LoRa Gateway uses a single-hop method, and each gateway must include a communication network capable of the Internet. If it is the mobile communication(i.e., WCDMA, LTE, etc.) network, it is required to pay the internet usage fee which is installed in each gateway. If the LoRa communication is frequent, the user has to spend a lot of money. We propose an idea on how to design a multi-hop protocol which enables packet routing between gateways by analyzing the LoRaWAN communication method implemented in its existing single-hop way in this paper. For this purpose, this paper provides an analysis of the standard specification of LoRaWAN and explains what was considered when such protocol was designed. In this paper, two gateways have been placed based on the functional role so as to make the multi-hop protocol realized: (i) hopping gateway which receives packets from the end-device and forwards them to another gateway; and (ii) main gateway which finally transmits packets forwarded from the hopping gateway to the server via internet. Moreover, taking into account that LoRaWAN is wireless mobile communication, a level-based routing method is also included. If the protocol proposed by this paper is applied to the LoRaWAN network, the monthly internet fee incurred for the gateway will be reduced and the reliability of data transmission will be increased.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.1
• /
• pp.107-115
• /
• 2009

The cryptological key which is used in WiMAX environment is used at regular intervals by mobile nodes (laptop computer, PDA, cell-phone) which is in the range of base station coverage. But it is very weak at local attack like man-in-the-middle when the mobile node is off the range of base station or enters into the range to communicate with base station because the communication section is activated wirelessly. This paper proposes a distribution key building protocol which can reuse security key used by nodes to reduce cryptological security attack danger and communication overhead which occurs when mobile node tries to communicate with base station. The proposed distribution key establishing protocol can reduce overhead which occurs between base station and mobile node through key reusing which occurs during the communication process and also, makes security better than IEEE 802.16 standard by creating shared key which is required for inter-certification through the random number which node itself creates.

• Journal of the Korean Geosynthetics Society
• /
• v.22 no.4
• /
• pp.9-15
• /
• 2023

Compaction is performed in civil engineering sites to secure the stability of the ground and prevent settlement. While the process of compaction is crucial, it is also essential to evaluate the degree of compaction after the completion of the process. In domestic sites, the evaluation of compaction is mainly conducted on a small number of spot using point-based tests such as plate load tests and sand cone tests. The methods presented so far allow assessment of surface compaction, but evaluating compaction in deeper layers poses challenges. Moreover, due to the limited coverage of point-based testing, it is difficult to achieve an overall assessment of compaction. As a solution to these issues, the Spectral-Analysis-of-Surface-Waves (SASW) tests were utilized to evaluate compaction. SASW tests offer a broader measurement range compared to point-based tests, and depending on the test setup, this method can provide the stiffness of the ground at greater depths. In this study, SASW tests were conducted in a compacted soil site under different conditions to assess compaction. Additionally, Nuclear Density Gauge tests were conducted concurrently to compare and verify the results of SASW. The research results confirmed the feasibility of evaluating compaction using SASW at the geotechnical site.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.4
• /
• pp.62-74
• /
• 2015

This study was carried out to provide examples of planting methods for the construction of street green spaces with abundant greenery by analyzing road type, surrounding land use and planting structures in street green spaces on Port Island, Kobe, Japan. Port Island_(total area: 826ha) is a marine cultural city located in Japan's first artificial island with facilities of urban function and port facilities. The study site was designated at 11 plots of $55{\sim}285m^2$ on Port Island, and topography structure styles were divided into four types with mounding style, slope style, slope and flat style, flat style according to the adjacent roads width. The area adjacent to the middle roads with high levels of noise and pollution set up the mounding style, slope style, slope and flat style of multi-layer structures using topographic properties. The area adjacent to small roads focused on a green strip with shrubs on a flat style. Surrounding land-uses include a public institution, housing complex, and a commercial building. The planting concept was a buffer and landspace function in case of the middle road_(lane 4) while the small road_(lane 2) was a landspace function. Planting species were diverse with Liquidambe formosana, Cinnamomum camphora, Sapium sebiferum, Cedrela sinensis, Laeocarpus sylvestris var. ellipticus, Ginkgo biloba, Prunus serrulata var. spontanea, Zelkova serrata, Quercus glauca, Juniperus chinensis, Magnolia kobus, Rhododendron spp., Camellia japonica, Abelia mosanensis, etc. Planting density was 0.02~0.08(0.04) individual/$m^2$ at the canopy layer, 0.02~0.08(0.04) individual/$m^2$ at the understory layer. Ratio of green coverage was 40.0~173.7(93.0)% at the canopy layer, 2.1~79.8(34.9)% at the understory layer and 17.9~64.2(32.9)% at the shrub layer. $Gr{\ddot{u}}volumenzahl$ was $1.43{\sim}6.67(4.13)m^3/m^2$ at the canopy layer, $0.02{\sim}2.01(0.85)m^3/m^2$ at the understory layer and $0.14{\sim}0.58(0.26)m^3/m^2$ at the shrub layer. The ratio of green coverage of street green space on Port Island was higher than that of Seoul, and particularly, the ratio of green coverage and $gr{\ddot{u}}volumenzahl$ at the shrub layer differed, compared to the main street green space in Korea. The result of this study may be applicable to other coastal reclaimed cities in terms of setting methods for street greenery considering the topography structure, planting structure and planting function.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.2
• /
• pp.3-9
• /
• 2013

Various data like digital maps(1/1,000 or 1/5,000), field surveying, online materials and literatures are used for the preliminary investigation for urban development such as the feasibility evaluation, the profitability analysis, the zoning proposal, the zoning designation, and the land replotting planning. There are a couple of urban development methods like an expropriation, a replotting, a mixed-used method. The replotting method requires the consideration of land replotting types based on topography and building condition, which is not easy to gather data for the preliminary investigation maintaining the security of development planning. There are limitations of a preliminary investigation using aerial photos to detect topographic and building changes at specific period. GIS data combined with high-resolution imagery has advantages over the current dataset, which come from easy acquisition of various spatial resolution satellite images, wide swath coverage, the choice of imagery resolution satisfying a usage purpose, economic benefit comparing to aerial photos, and the calculation of distance and area on imagery from image modeling. For these reasons, the proposed method in this study enables to perform the more appropriate preliminary investigation using more accurate information.

• Geophysics and Geophysical Exploration
• /
• v.17 no.4
• /
• pp.231-241
• /
• 2014

Recently, single channel seismic survey for engineering purpose have been used widely taking advantage of simple processing. However it is very difficult to obtain high fidelity subsurface image by single channel seismic due to insufficient fold coverage. Recently, seismic waveform inversion in multi channel seismic survey is utilized for accurate subsurface imaging even in complex terrains. In this paper, we propose the seismic waveform inversion algorithm for velocity model building using a single channel seismic data. We utilize the Gauss-Newton method and assume that subsurface model is 1-Dimensional. Seismic source estimation technique is used and offset effect is also corrected by removing delay time by offset. Proposed algorithm is verified by applying modified Marmousi2 model, and applied to field data set obtained in port of Busan.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.1
• /
• pp.144-158
• /
• 2012

A higher spatial resolution is preferable to support the accuracy of detailed climate analysis in urban areas. Airborne LiDAR (Light Detection And Ranging) and satellite (KOMPSAT-2, Korea Multi-Purpose Satellite-2) images at 1 to 4 m resolution were utilized to produce digital elevation and building surface models as well as land cover maps at very high(5m) resolution. The Climate Analysis Seoul(CAS) was used to calculate the fractional coverage of land cover classes in built-up areas and thermal capacity of the buildings from their areal volumes. It then produced analyzed maps of local-scale temperature based on the old and new input data. For the verification of the accuracy improvement by the precise input data, the analyzed maps were compared to the surface temperature derived from the ASTER satellite image and to the ground observation at our detailed study region. After the enhancement, the ASTER temperature was highly correlated with the analyzed temperature at building (BS) areas (R=0.76) whereas there observed no correlation with the old input data. The difference of the air temperature deviation was reduced from 1.27 to 0.70K by the enhancement. The enhanced precision of the input data yielded reasonable and more accurate local-scale temperature analysis based on realistic surface models in built-up areas. The improved analysis tools can help urban planners evaluating their design scenarios to be prepared for the urban climate.