• Korean Journal of Computational Design and Engineering
• /
• v.13 no.6
• /
• pp.459-468
• /
• 2008

A web-based Computer-Aided Engineering (CAE) supporting system is connected with a Product Data Management (PDM) system for Small and Medium Enterprises (SMEs) suffering from the lack of building hardware, software and related experts. An analysis of current business models and worksite requirements provides an improved process model and data to be shared between the PDM system and the CAE supporting system. Since all engineering tasks such as geometric modeling, mesh generation, static stress and modal analysis, and fatigue durability analysis are automated in the CAE supporting system, the user in charge of the CAE have only to configure the concerned values of design variables and result data through the web page. The existing Change Management module of the PDM system is modified for seamless data exchange, i.e. sending the Engineering Change Order (ECO) data to the CAE supporting system and receiving the CAE result data bark. The hi-directional data transfers between the PDM system and the CAE supporting system is made possible by adaptors bused on the Simple Object Access Protocol (SOAP). The current approach will be very helpful for SMEs that only have the PDM system and have no adequate infrastructure for CAE.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.4
• /
• pp.390-396
• /
• 2013

Due to the development of technology, there is a considerable increase in the number of skyscrapers in the world. Accordingly, there are rapid growing requests about maintenances such as cleaning, painting, and inspection. However, it is extremely dangerous working the walls of buildings, and crashes from buildings have accounted for large proportion of constructional accidents. Especially, as the number of buildings with irregular shapes increases, the accident rate during the maintenance work increases each year, and most of the accidents lead to death. An alternative solution must be developed with the commercialization of automatic systems. In this research, a fundamental research has been conducted for drafting and commercializing an automation tool that is carried in the built-in guide system, which can perform cleaning.

• Journal of Computing Science and Engineering
• /
• v.2 no.4
• /
• pp.394-411
• /
• 2008

The data in automation and control systems can be achieved not only from different field devices but also from different OPC (OLE for Process Control) servers. However, current OPC clients can only read and decode the simple data from OPC servers. They will have some problems to acquire structured data and exchange the structured data. In addition to the large network control systems, the OPC clients can read, write, and subscribe to thousands of data points from/to OPC servers. Due to that, the most important factor for building a high performance and scalable industrial control system is the ability to transfer the process data between server and client in the most efficient and fastest way. In order to solve these problems, we propose a means to implement the OPC DA (Data Access) server supporting the OPC complex data, so that the OPC DA clients are able to read and decode any type of data from OPC servers. We also propose a method for caching the process data in large industrial control systems to overcome the limitation of performance of the pure OPC DA system. The performance analysis and discussion indicate that the proposed system has an acceptable performance and is feasible in order for applying to real-time industrial systems today.

• Journal of KIBIM
• /
• v.7 no.1
• /
• pp.45-53
• /
• 2017

Continuous research efforts have been made on acquiring location data on construction sites. As a result, GPS and RFID are increasingly employed on the site to track the location of equipment and materials. However, these systems are based on radio frequency technologies which require attaching tags on every target entity. Implementing the systems incurs time and costs for attaching/detaching/managing the tags or sensors. For this reason, efforts are currently being made to track construction entities using only cameras. Vision-based 3D tracking has been presented in a previous research work in which the location of construction manpower, vehicle, and materials were successfully tracked. However, the proposed system is still in its infancy and yet to be implemented on practical applications for two reasons. First, it does not involve entity matching across two views, and thus cannot be used for tracking multiple entities, simultaneously. Second, the use of a checker board in the camera calibration process entails a focus-related problem when the baseline is long and the target entities are located far from the cameras. This paper proposes a vision-based method to track multiple workers simultaneously. An entity matching procedure is added to acquire the matching pairs of the same entities across two views which is necessary for tracking multiple entities. Also, the proposed method simplified the calibration process by avoiding the use of a checkerboard, making it more adequate to the realistic deployment on construction sites.

• Journal of Construction Engineering and Project Management
• /
• v.2 no.4
• /
• pp.11-19
• /
• 2012

Construction supply chain management (CSCM) has become one of the critical factors that determine the success of a construction project as it becomes increasingly complicated and mega-sized. Particularly for high-rise or mega-sized building construction, just-in-time supply chain management is required due to lack of storage space and effective logistics for construction components and materials at a construction site. Despite the fact that research and development of radio frequency identification (RFID) and wireless sensor network (WSN) technology have been performed, construction project managers still need to carry mobile devices and check material and component flow at each stage of the supply chain process. This research proposes that the equipment used in the construction supply chain process, such as movers, trailers, gates, and hoists, can become main actors in the supply chain process using RFID and WSN technologies. And the proposed equipment and process focused on a solution to the redundancy identification problem, which has been observed in operations that use RFID/WSN-based processes for construction logistics. This paper also presents issues identified through verification and validation of the research results and proposes further studies.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.6_1
• /
• pp.575-583
• /
• 2007

Surface segmentation aims to represent the terrain as a set of bounded and analytically defined surface patches. Many previous segmentation methods have been developed to extract planar patches from LIDAR data for building extraction. However, most of them were not fully satisfactory for more general applications in terms of the degree of automation and the quality of the segmentation results. This is mainly caused from the limited information derived from LIDAR data. The purpose of this study is thus to develop an automatic method to perform surface segmentation by combining not only LIDAR data but also images. A region-based method is proposed to generate a set of planar patches by grouping LIDAR points. The grouping criteria are based on both the coordinates of the points and the corresponding intensity values computed from the images. This method has been applied to urban data and the segmentation results are compared with the reference data acquired by manual segmentation. 76% of the test area is correctly segmented. Under-segmentation is rarely founded but over-segmentation still exists. If the over-segmentation is mitigated by merging adjacent patches with similar properties as a post-process, the proposed segmentation method can be effectively utilized for a reliable intermediate process toward automatic extraction of 3D model of the real world.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.925-930
• /
• 2008

As office automation appliances and communication equipments are adopted in office buildings, internal heat gains increase gradually. When making simulation model, internal heat gains are usually set up with standard values or ignored. Therefore, the impact of the internal heat gains has been ignored or not been focused although it is recognised as significant contributor to heating/cooling load of buildings. This study focused on the impact of internal heat gains on curtain wall buildings. the amount and schedules of heat internal gains profiles not only affect the profiles of heating/cooling loads, but also make impact on reducing the effectiveness of high performance glazing systems. It is important to identify internal heat gains profiles before considering the installation of high performance glazing systems.

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.4
• /
• pp.71-80
• /
• 2006

A construction robot has been developed for higher productivity and better safety in various construction fields. Especially, curtain wall is suitable for outer wall material of tall commercial building and apartment complexes. This heavy material is, however, hard to install with a manpower and outdated equipment. For this reason, the prototype of ASCI (Automation System for Curtain wall Installation) was developed. This system has a robot controller(i.e. hand-held remote control unit) for the transfer information signal between human operator and robot system. Although study has been conducted on manual controller of ASCI, hardly any information is known about the operator's opinion. In this study, a questionnaire was completed by operator to get their opinion about aspects which need to design a more comfortable and productive manual controller of construction machinery, robot included. Through the result of study, it is expected that this technical data is contributed to the robot controller design for comfort and productivity of various industrial machinery.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.259-260
• /
• 2007

본 논문은 건물 외면의 유리창 청소로봇에 관한 것으로, 더욱 세부적으로는 청소 시스템을 갖춘 로봇을 사람이 닦기 힘들거나 위험한 고층건물이나 아파트 둥의 실외 유리창에 흡착시켜 청소로봇을 이용하여 실외 유리창을 자동으로 닦을 수 있게 하는 건물 외면의 유리창 청소로봇에 관한 것이다. 진공펌프를 사용하여 유리창에 안정적으로 흡착할 수 있도록 하였고, 블루투스를 이용하여 무선 조종이 가능하도록 하여 사용자가 원거리에서 로봇의 청소를 제어할 수 있도록 하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.52-54
• /
• 2018

Recently, there is a growing interest in the 4th revolution called 'fusion and connection', and 'high connectivity society' is in sight. As a result, interest in the Internet of things has reached a record high, and it is not limited to automation and connected cars. Therefore, the Internet of things is expected to play an important role in building ecosystem of next generation mobile communication service. So, in this paper, we will introduce what kind of mobile communication is suitable for internet of things and the technology trend of internet communication for Internet of things.