• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.669-676
• /
• 2017

Recently, due to the importance of information security, security vulnerability analysis and various information protection technologies and security systems are being introduced as a countermeasure against cyber-attacks in new as well as existing buildings, and information security studies on high-rise buildings are also being conducted. However, security system introduction and research are generally performed from the viewpoint of general IT systems and security policies, so there is little consideration of the infrastructure of the building. In particular, the BAS or building infrastructure, is a closed system, unlike typical IT systems, but has unique structural features that accommodate open functions. Insufficient understanding of these system structures and functions when establishing a building security policy makes the information security policies for the BAS vulnerable and increases the likelihood that all of the components of the building will be exposed to malicious cyber-attacks via the BAS. In this paper, we propose an architecture reference model that integrates three different levels of BAS structure (from?) different vendors. The architectures derived from this study and the security characteristics and vulnerabilities at each level will contribute to the establishment of security policies that reflect the characteristics of the BAS and the improvement of the safety management of buildings.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.702-708
• /
• 2018

3D printing technology is attracting increasing attention as a key technology of the fourth industrial revolution that can change the production paradigm of existing industries. The introduction of construction 3D printing technology has been slower than other industries because of the characteristics of the construction field. On the other hand construction automation using 3D printing is required to reduce the production population, as well as improve productivity and safety. In this study, a construction 3D printing work breakdown structure and link method to a standard estimation system were developed as a preliminary preparation for introducing 3D printing to construction. Based on expert consultation on construction and 3D printing, a hypothetical scenario was developed based on existing construction 3D printing technology. According to the scenario, 16 kinds of works required for 3D printing construction work were derived. The existing work breakdown structure and standard estimation system were analyzed, and the 3D printing work was linked. 3D printing works that were the same as the existing breakdown structure were found, and non-existent works were added to the similar breakdown structure. These results are expected to be helpful for future 3D printing construction management and cost estimation. The actual standard estimation system through 3D printing work will need to be calculated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.61-69
• /
• 2016

Since 2000, the market of convenient stores in Korea has developed rapidly due to the explosive growth in single households but it still consists mainly of manual work due to the nature of the domestic industry. Hence the explosive increase in demand in the market is mostly due to workers. Therefore, the research aimed at encouraging efficiency via automation, which is carried out in manufacturing, such as electronic, cars and so on, is inadequate. This study performed a feasibility analysis of investment for introducing an automated system on brand A, which is domestic famous convenience store company. Productivity growth according to the introduction of an automated guided vehicle and the cost-benefits was studied with using a simulation for the picking process, which is most personnel and time consuming. As a result, the simulation showed that the equipment AGV introduced for choosing the process has the effects of cost saving and increased time efficiency for performing manual labor. Furthermore, appropriate numbers of AGV were forecasted considering the capacity of the distribution Center in the brand A convenient store, which has been growing steadily. There are increasing numbers of worker labor costs in the distribution industry these days. Before building a large new automate center, it is expected to provide a good information to investors who are considering increasing productivity through partial automation of each of unit process to achieve some cost reduction.

• Journal of Korea Port Economic Association
• /
• v.36 no.3
• /
• pp.99-114
• /
• 2020

Overseas advanced ports are promoting smartification, as well as full automation of the terminals surrounding container terminals. A smart port can be defined as a comprehensive concept that pursues increased operational efficiencies, maximization of profit, efficient use of energy, and construction of eco-friendly ports with the introduction of fourth-industrial-revolution technology, including port automation. However, Korea is making efforts to introduce fourth-industrial-revolution technology into ports, but indications are that they are somewhat insufficient compared to advanced ports abroad. Therefore, this study conducted a survey about operators and users of container terminals in Gwangyang Port by deriving the factors determining the introduction of smart ports, such as cost, service, time, safety, and environment, from previous studies. This study analyzed the factors determining the introduction of smart ports and moderating effects when the adjustment variables of operators and users were applied to the pros and cons. As a result of the analysis, it was found that port operators and users have a moderating effect on cost, time, safety, and environmental factors, but not on service factors. These results indicate that port operators try to reduce costs through efficient operation, time management, and by reducing safety accidents by building smart ports, but analysis showed that the negative effects of smart ports have affected port users. The results of this study were derived through a moderated regression analysis and suggested implications for introducing smart ports in the conclusion.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.4
• /
• pp.265-272
• /
• 2023

This paper presents a conceptual strategy and technologies for the digital transformation of design and construction of reinforced concrete (RC) structures. The development of an automated detail design strategy for RC structures is described. Integrated digital platform based on 5D BIM concept is proposed for the replacement of the current technology environment-based 2D CAD. Generally, the detail design development is labor-intensive and iterative. Effective automation of relevant aspects can dramatically improve productivity and accuracy. The proposed solutions for the automated BIM modeling based on the rebar and formwork detail design automation achieves the productivity and accuracy sufficient for site application. The platform integrates and manages the information flow between each solution or application and provides it to all participants of the project. Finally, it is expected that the proposed strategy and technologies can be further enhanced to achieve the productivity and accuracy needed for widespread site application and digital transformation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.7
• /
• pp.1208-1213
• /
• 2006

A micro embedded did the task to be simply the sequent at the past. The necessity of an embedded operating system did not exist in the reason. We satisfy the complication of the system and operating system have been desired for the officer of the process. The necessity of the process of real-time processing increased also with fast response time to users, The porting follows and have been composed of an real-time embedded operating system. We can control the control unit with the sensor to be established in the building, An embedded web sever to use the resource of the at least is appering a networking facility of interaction. In this paper, The web sever to be implemented in a purity software. We draw data for the thing to implement overall demo to the remote through Internet and We put the point even though we organized the frame to control this. we have successfully ported linux on an embedded system, which is based on intel StrongARM SA-1110 processor, then written several network modules of ethernet-based network device.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.1
• /
• pp.155-161
• /
• 2015

The energy storage system is actively used as the widespread of smart grid. In the case of large scale EES, it can be efficiently controlled linked with BEMS or BAS. But, in the case of EES installed in a small sized household, it needs the help of the remote control system because it lacks the expert for controlling and operating of EES. In addition, in the case when the solar energy generation and EES are installed at the same time, a small sized EMS which can be efficiently controlled depending on the solar energy generation or electric power load is needed. In this paper, the EMS which can efficiently control the solar power generation as well as EES installed in a small sized household is implemented and its usefulness is verified through some experimental studies.

• The Journal of Information Systems
• /
• v.26 no.4
• /
• pp.63-85
• /
• 2017

Purpose Recently, much attention in building smart factory has dramatically increased with an emergence of the Industry 4.0. As we noted a connectivity gap between main concerns of MIS and the automated manufacturing systems such as POP and MES, it is recommended that CPS (Cyber-Physical System) can be an important building block for the smart factory and enrich the depth of MIS knowledge. Therefore, first, this study attempted to identify the connectivity gap between the traditional field of MIS (ERP, SCM, CRM, etc.) and the automated manufacturing systems, and then recommended CPS as a technical bridge to fill the gap. Secondly, we studied concepts and research trend of CPS that is believed to be a virtual mechanism to manage manufacturing systems in an integrated manner. Finally, we suggested research and educational opportunities in MIS based on the CPS perspectives. Design/methodology/approach Since this paper introduced relatively new idea of CPS originally discussed in the field of engineering, traditional MIS research method such as survey and experiment may not fit well. Therefore this research collected technical cases through literature survey in engineering fields, video clips from Youtube, and field references from various ICT Exhibitions and Conventions. Then we analyzed and reorganized them to highlight the necessity of CPS and draw some insight to share with MIS academia. Findings This paper introduced CPS to bridge the connectivity gap between the traditional MIS and automated manufacturing system (smart factory), a concern far away from the MIS academia. Further, this paper suggested future research subjects of MIS such as developing software to share big production data and systems to support manufacturing decisions, and innovating MIS curricula including smart and intelligent manufacturing technology within the context of traditional enterprise systems.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.5
• /
• pp.261-265
• /
• 2012

The applications of augmented reality technology is increasing in the several field by IT convergence and we find augmented reality application easily in the smart device application area. And then, to attempt to use augmented reality technology in advantage, exhibitions and performances was activated. However, it less than other fields of augmented reality technology expertise yet. Among them services to Use in fusion with monitoring are lacking. In this paper, we proposed the augmented reality monitoring technology based on smart device. It is able to incorporate QR-code which is already building for the purpose of advertising promotional materials with augmented reality technology in many areas. Therefore, it is able to utilize unattended building or automation equipment facilities using QR-code and environmental monitoring sensor in the industry.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.3
• /
• pp.65-70
• /
• 2010

Steel frame construction in high places entails many risk factors. In order to improve the safety and productivity of steel frame construction, a project to develop a robotic tower-crane has been undertaken. As the first step, a real-time lifting-path tracking system is being developed. In a previous study, a laser-based tracking system was proposed. While a laser-based tracking system requires at least three laser sensors to detect the x, y, z coordinates of a lifted steel member, a GPS-based system has an advantage over the laser-based system, in that the x, y, z coordinates of a lifted steel member can be detected by a single GPS sensor. To improve the accuracy, arelative positioning method using two GPS sensors was proposed in a previous study. This paper reports an improved GPS-based lifting-path tracking system of a tower crane based on an integrated RF modem and GPS system. The results showedthat the RF modem could successfully send the identifier information to a server a maximum distance of 1 km away from the lifted steel beam, and the lifting path information of each beam captured by the GPS-based tracking system was successfully saved together. Also, byusing an improved algorithm for the GPS relative positioning method, the deviation was reduced to 0.61 m on average.