• Applied Chemistry for Engineering
• /
• v.7 no.4
• /
• pp.735-742
• /
• 1996

Polymeric matrices were prepared with dextran and silver sulfadiazine by adding glycerine as a plasticiser. Namely, the release rate of the drug from the polymeric matrix formulations in dissolved phases was determined in a phosphate buffer solution. The results were as follows : The drug release time was delayed as drug loading contents increased, whereas it decreased as the glycerine concentration increased. The drug release time was not changed with varying the molecular weight of the dextran. The apparent release rate constant (k) increased as the composition of silver sulfadiazine and glycerine was increased. But the apparent release rate constant (k) was not changed with increasing molecular weight of the dextran.

• Nuclear Engineering and Technology
• /
• v.45 no.1
• /
• pp.29-40
• /
• 2013

Two different kinds of nuclear power plants produce a substantial amount of spent fuel annually in Korea. According to the current projection, it is expected that around 60,000 MtU of spent fuel will be produced from 36 PWR and APR reactors and 4 CANDU reactors by the end of 2089. In 2006, KAERI proposed a conceptual design of a geological disposal system (called KRS, Korean Reference disposal System for spent fuel) for PWR and CANDU spent fuel, as a product of a 4-year research project from 2003 to 2006. The major result of the research was that it was feasible to construct a direct disposal system for 20,000 MtU of PWR spent fuels and 16,000 MtU of CANDU spent fuel in the Korean peninsula. Recently, KAERI and MEST launched a project to develop an advanced fuel cycle based on the pyroprocessing of PWR spent fuel to reduce the amount of HLW and reuse the valuable fissile material in PWR spent fuel. Thus, KAERI has developed a geological disposal system for high-level waste from the pyroprocessing of PWR spent fuel since 2007. However, since no decision was made for the CANDU spent fuel, KAERI improved the disposal density of KRS by introducing several improved concepts for the disposal canister. In this paper, the geological disposal systems developed so far are briefly outlined. The amount and characteristics of spent fuel and HLW, 4 kinds of disposal canisters, the characteristics of a buffer with domestic Ca-bentonite, and the results of a thermal design of deposition holes and disposal tunnels are described. The different disposal systems are compared in terms of their disposal density.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.7
• /
• pp.942-952
• /
• 2013

Monoliths are functional porous materials with a three-dimensional continuous interconnected pore structure in a single piece. A monolith with uniform shape based on poly(${\gamma}$-glutamic acid) (PGA) has been prepared via a thermally induced phase separation technique using a mixture of dimethyl sulfoxide, water, and ethanol as solvent. The morphology of the obtained monolith was observed by scanning electron microscopy and the surface area of the monolith was evaluated by the Brunauer Emmett Teller method. The effects of fabrication parameters such as the concentration and molecular mass of PGA and the solvent composition have been systematically investigated. The PGA monolith was cross-linked with hexamethylene diisocyanate to produce the water-insoluble monolith. The addition of sodium chloride to the phase separation solvent affected the properties of the cross-linked monolith. The swelling ratio of the cross-linked monolith toward aqueous solutions depended on the buffer pH as well as the monolith fabrication condition. Copper(II) ion was efficiently adsorbed on the cross-linked PGA monolith, and the obtained copper-immobilized monolith showed strong antibacterial activity for Escherichia coli. By combination of the characteristic properties of PGA (e.g., high biocompatibility and biodegradability) and the unique features of monoliths (e.g., through-pore structure, large surface area, and high porosity with small pore size), the PGA monolith possesses large potentials for various industrial applications in the biomedical, environmental, analytical, and separation fields.

• Archives of Pharmacal Research
• /
• v.27 no.6
• /
• pp.662-669
• /
• 2004

The highly water-soluble monomethoxypoly(ethyleneglycol) (mPEG) prod rugs of cyciosporin A(CsA) were synthesized. These prod rugs were prepared by initially preparing intermediate in the form of carbonate at the 3'-positions of CsA with chloromethyl chloroformate, in the pres-ence of a base to provide a 3'-carbonated CsA intermediate. Reaction of the CsA intermediate with mPEG derivative in the presence of a base provides the desired water-soluble prod rugs. As a model, we chose molecular weight 5 kDa mPEG in the reaction with CsA to give water soluble prodrugs. To prove that the prod rug is decomposed in the body to produce CsA, the enzymatic hydrolysis test was conducted using human liver homogenate at $37^{\circ}C$. The prodrug was decomposed in human liver homogenate to produce the active material, CsA, and the hydrolysis half-life ($t_{1/2}$) of the prodrug, KI-306 was 2.2 minutes at $37^{\circ}C$. However, a demon-stration of non-enzymatic conversion in pH 7.4 phosphate buffer was provided by the fact that the half-life ($t_{1/2}$) is 21 hours at 37$^{\circ}C$. The hydrolysis test in rat whole blood was also conducted. The hydrolysis was seen with half-life ($t_{1/2}$) of about 9.9, 65.0, 14.2, 3.4, 2.1 9.5, and 1.6 minutes for KI-306, 309, 312, 313, 315, 316, and 317, respectively. This is the ideal for CsA prodrug. The pharmacokinetic study of the prodrug, KI-306, in comparison to the commer-cial product (Sandimmune Neoral Solution) was also carried out after single oral dose. Each rat received 7 mg／kg of CsA equivalent dose. Especially, the prodrug KI-306 exhibits higher AUC and $C_{max}$ than the conventional Neoral. The AUC and $C_{max}$ were increased nearly 1.5 fold. The kinetic value was also seen with $T_{max}$ of about 1.43 and 2.44 hours for KI-306 and Neoral, respectively.

• Archives of Pharmacal Research
• /
• v.25 no.1
• /
• pp.39-44
• /
• 2002

Recently, we have reported that 2-bromopropane might have an immunotoxic potential in rats when exposed for 28 days. In the present studies, the possibility of 2i-deoxyguanosine abduct formation by 2- bromopropane was investigated in vitro to elucidate molecular mechanism of 2-bromopropane-induced immunosuppression. $N^7-Guanine adduct$ of 2'-bromopropane (i.e., $N^7-isopropyl$ guanine) was chemically synthesized and structurally characterized by analysis of UV,$^1H-NMR,{\;}^{13}C-NMR$, COSY and fast atom bombardment mass spectrometry to use as a reference material. Incubation of 2'-deoxyguanosine with an excess amount of 2-bromopropane in PBS buffer solution, pH 7.4, at $37^{\circ}C$ for 16 h, followed by a thermal hydrolysis, produced a detectable amount of $N^7-isopropyl$ guanine by an HPLC and UV analysis. The present results suggest that 2-bromopropane might form a DNA adduct in $N^7-position$ of 2'-deoxyguanosine at 3 Physiological condition.

• Journal of the Korea Society for Simulation
• /
• v.21 no.3
• /
• pp.25-33
• /
• 2012

Ptak & Smith published ORLICKY'S Material Requirement Planning Third Edition in 2011 to correspond the rapidly changed market demand by improving the original MRP based on Theory of Constraints(TOC) replenishment inventory management. This study is to develop the simulation model to decide the proper target inventory level for TOC replenishment inventory management using system dynamics Vensim software. This study shows that the proper target replenishment level is how much significant to manage the inventory by the random sample data simulation. This simulation model will be extended to compare the results of the TOC replenishment inventory management planning with the results of the old MRP planning by the enterprise actual inventory data.

• Polymer(Korea)
• /
• v.36 no.4
• /
• pp.470-477
• /
• 2012

A tyrosinase-immobilized biosensor was developed based on various amine-modified multi-walled carbon nanotube (MWNT) supports for the detection of phenolic compounds. MWNTs with various amine groups were prepared by radiation-induced graft polymerization of glycidyl methacrylate (GMA) onto MWNT supports and the subsequent amination of poly(GMA) graft chains. The physical and chemical properties of the poly(GMA)-grafted MWNT supports and the aminated MWNT supports were investigated by SEM, XPS, and TGA. Furthermore, the electrochemical properties of the prepared tyrosinase-modified biosensor based on MWNT supports with amine groups were also investigated. The response of the enzymatic biosensor was in the range of 0.1-0.9 mM for the concentration of phenol in a phosphate buffer solution. Various parameters influencing biosensor performance have been optimized: binder effects, pH, temperature, and the response to various phenolic compounds. The biosensor was tested on phenolic compounds contained in two different commercial red wines.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.215-219
• /
• 2004

Metal-chelate derivatives have been investigated intensively as an emitting layer and recognize to have excellent electroluminescence(EL) properties. We synthesized new luminescent material, 1,4-dihydoxy-5,8-naphtaquinone $Aiq_3$ complex($Al_2Nq_4$) and investigated the electrical optical properties. OLED has potential candidates for information display with merits of thickness, low power and high efficiency. Although the OLED show a lot of advantages for information display, it has the limit of inorganic(metal)/ organic interface. In this study, the two methods are used to study the interface of metal/organic in OLED. First, we treated $O_2$ plasma on an ITO thin film by using RIE system, and analyzed the ingredient of ITO thin film according to change of the processing conditions. We used the RDS and the XPS for the ingredient analysis of the surface and bulk. We measured electrical resistivity using Four-Point-Probe and calculated sheet resistance, and ITO surface roughness was measured by using AFM. We fabricated OLED using substrate that was treated optimum ITO surface. Second, we used the buffer layer of CuPc to improve the characteristics of the interface and the hole injection in OLED. The result of the study for electrical and optical properties by using I V L T System(Flat Panel Display Analysis System), we confirmed that the electrical properties and the luminance properties were improved.

• Journal of Powder Materials
• /
• v.17 no.6
• /
• pp.456-463
• /
• 2010

This paper describes the results of the application of Cr-Diamond-like carbon (DLC) films for efficiency improvement through surface modification of spur gear parts in the hydraulic gear pump. Cr-DLC films were successfully deposited on SCM 415 substrates by a hybrid coating process using linear ion source (LIS) and magnetron sputtering method. The characteristics of the films were systematically investigated using FE-SEM, nano-indentation, sliding tester and AFM instrument. The microstructure of Cr-DLC films turned into the dense and fine grains with relatively preferred orientation. The thickness formed in our Cr buffer layer and DLC coating layer were obtained the 487 nm and $1.14\;{\mu}m$. The average friction coefficient of Cr-DLC films considerably decreased to 0.15 for 0.50 of uncoated SCM415 material. The hardness and surface roughness of Cr-DLC films were measured 20 GPa and 10.76 nm, respectively. And then, efficiency tests were performed on the hydraulic gear pump to investigate the efficiency performance of the Cr-DLC coated spur gear. The experimental results show that the volumetric and mechanical efficiency of hydraulic gear pump using the Cr-DLC spur gear were improved up to 2~5% and better efficiency improvement could be attributed to its excellent microstructure, higher hardness, and lower friction coefficient. This conclusion proves the feasibility in the efficiency improvement of hydraulic gear pump for industrial applications.

• Korean Journal of Materials Research
• /
• v.9 no.12
• /
• pp.1216-1221
• /
• 1999

GaN films were deposited on sapphire [$Al_2O_3(0001)$] substrates at relatively low temperature by MOCVD using N-atom source based on a Dielectric Barrier Discharged method. Ammonia gas($NH_3$is commonly used as an N-source to grow GaN films in conventional MOCVD process, and heating to high temperature is required to provide sufficient dissociation of $NH_3$. We used a dielectric barrier discharge method instead of $NH_3$ to grow GaN film relatively low temperature. DBD is a type of discharge, which have at least one dielectric material as a barrier between electrode. DBD is a type of controlled microarc that can be operated at relatively high gas pressure. Crystallinity and surface morphology depend on growth temperature and buffer layer growth. With the DBD-MOCVD method, wurtzite GaN which is dominated by the (0001) reflection was successfully grown on sapphire substrate even at $700^{\circ}C$.