• Transactions of Materials Processing
• /
• v.12 no.5
• /
• pp.479-486
• /
• 2003

This paper presents an elastoplastic analysis for spent nuclear fuel disposal container and its 50 cm thick bentonite buffer to predict the collapse of the container while the horizontal asymmetric sudden rock movement of 10 cm is applied on the composite structure. This sudden rock movement is anticipated by the earthquake etc. at a deep underground. Elastoplastic material model is adopted. Drucker-Prager yield criterion is used for the material yield prediction of the bentonite buffer and von-Mises yield criterion is used for the material yield prediction of the container. Analysis results show that even though very large deformations occur beyond the yield point in the bentonite buffer, the container structure still endures elastic small strains and stresses below the yield strength. Hence, the asymmetric 50 cm thick bentonite buffer can protect the container safely against the 10 cm sudden rock movement by earthquake etc.. Analysis results also show that bending deformations occur in the container structure due to the shear deformation of the bentonite buffer. The finite element analysis code, NISA, is used for the analysis.

• Management Science and Financial Engineering
• /
• v.1 no.1
• /
• pp.39-66
• /
• 1995

This article presents a new model called the periodic square wave(PSW) to describe the material flow of periodic processes involving an intermediate buffer. The material flows into and out of the intermediate buffer are assumed to be periodic square shaped. By using this model, It is proved that the classical economic lot size model with finite supply rate, the so-called EPQ model, can be applicable to the arbitrary periodic demand case. This new model relaxes the original assumption of the constant demand. It is shown, as a unique application example, that the explicit solution for determining both upstream and downstream economic lot size can be obtained with the aid of the PSW model. The PSW model provides more accurate information on analyzing the inventory and production system than the classical approach, without losing simplicity and increasing the computational burden.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.1
• /
• pp.1-10
• /
• 1992

In the already presented paper, the performance analysis of SMUX was need a lot of time bacause of recussive method, So this paper proposed the new mathematical method for the SMUX's performance. And it is constructed and analyzed the queueing model for SMUX based on the Go-back N retransmission ARQ model. It is assumed that it has the infinite buffer and a single server. It is analzied the parameters that have influence on the byffer and a single server. It is analzied the parameters that have influence on the buffer behaviour of statistical multiplexer overflow probabilities. maximum buffer size. mean wating time and mean buffer size, and these relationship are represented the graphs and datas which provided a guide to the buffer design problem. As these results. it is efficient when the SMUX is apphed that the traffic density is below 0.5 and transmission error probabilities is below 10­$^3$. So this paper can be applied to the basic and theoretical background prior to the implementation of SMUX.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.30 no.2
• /
• pp.131-142
• /
• 2005

This paper proposes queueing models for a Web server system which is composed of an infinite-buffer main server and finite-buffer auxiliary server(s). The system is modeled by the level-dependent quasi-birth- death (QBD) process. Utilizing the special structure of the QBD, we convert the infinite level-dependent QBD into a finite level-independent QBD and compute the state probabilities. We then explore the operational characteristics of the proposed web-server models and draw some useful conclusions.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.11
• /
• pp.5343-5364
• /
• 2016

Considering the tradeoff between energy consumption and outage behavior in buffer-aided relay selection, a novel energy-efficient buffer-aided optimal relay selection scheme with power adaptation and Inter-Relay Interference (IRI) cancellation is proposed. In the proposed scheme, energy consumption minimization is the objective with the consideration of relay buffer state, outage probability and relay power control, in order to eliminate IRI. The proposed scheme selects a pair of optimal relays from multiple candidate relays, denoted as optimal receive relay and optimal transmit relay respectively. Source-relay and relay-destination communications can be performed within a time-slot, which performs as Full-Duplex (FD) relaying. Markov chain model is applied to analyze the evolution of relay buffer states. System steady state outage probability and achievable diversity order are derived respectively. In addition, packet transmission delay and power reduction performance are investigated with a specific analysis. Numerical results show that the proposed scheme outperforms other relay selection schemes in terms of outage behavior with power adaptation and IRI cancellation in the same relay number and buffer size scenario. Compared with Buffer State relay selection method, the proposed scheme reduces transmission delay significantly with the same amount of relays. Average transmit power reduction can be implemented to relays with the increasing of relay number and buffer size, which realizes the tradeoff between energy-efficiency, outage behavior and delay performance in green cooperative communications.

• Journal of the Korean Geotechnical Society
• /
• v.40 no.2
• /
• pp.29-40
• /
• 2024

This study aimed to evaluate the swelling behavior characteristics of KJ-II buffer blocks by performing numerical analysis of swelling pressure measurement experiments using the nonlinear elasticity model of COMSOL Multiphysics. The analysis was conducted under boundary conditions that included isotropic constraints and water injection pressure, mirroring the experimental settings. Validation of the numerical model was achieved by comparing its outputs with experimental results. The validated model was then used to simulate swelling deformations under unconfined conditions and to analyze swelling pressure as influenced by dry density and the geometric shape of the buffer material. The results accurately represented the swelling deformation observed during the saturation process and demonstrated that swelling pressure increases with higher dry density. Moreover, simulations concerning the geometric shape of the buffer material indicated a markedly faster rate of pressure increase in U-shaped samples compared to cylindrical ones. Analysis suggested that stress manifested preemptively near the internal edges of U-shaped samples during saturation. To enhance the simulation's fidelity to actual buffer material behavior, further refinement of the analysis model using a nonlinear elasticity model is recommended.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2000.11a
• /
• pp.561-566
• /
• 2000

Computer-Communication System may be classified into two kinds of systems considering connection capability among terminal and computing facility : time sharing and distributed computer systems According to the different input characteristic, the buffer behavior of two systems is quite different. Here we restrict our study to the analysis of queueing behavior of a demultiplexing buffer of time sharing systems. The analysis shows that M/G/1 queueing model can be used model such behavior.

• Journal of Korean Institute of Industrial Engineers
• /
• v.28 no.4
• /
• pp.344-350
• /
• 2002

An alternative to traditional production planning and control systems such as MRP and JIT is the drum-buffer-rope(DBR). Using the DBR system, companies can achieve a large reduction of work-in-process (WIP) and finished-goods inventories (FGI), significant improvement in scheduling performance, and substantial earnings increase. The purpose of this paper is to analyze the effect of the DBR system in a serial production line. Using Markov process, we modeled a DBR system with three stages. For the model developed, we analyze the system characteristics and then present an optimization model for system design. The system performance is also analyzed through sensitivity analysis.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.3
• /
• pp.199-206
• /
• 2017

A geological repository for the disposal of high-level radioactive waste is generally constructed in host rock at depths of 500~1,000 meters below the ground surface. A geological repository system consists of a disposal canister with packed spent fuel, buffer material, backfill material, and intact rock. The buffer is indispensable to assure the disposal safety of high-level radioactive waste, and it can restrain the release of radionuclides and protect the canister from the inflow of groundwater. Since high temperature in a disposal canister is released to the surrounding buffer material, the thermal properties of the buffer material are very important in determining the entire disposal safety. Even though there have been many studies on thermal conductivity, there have been only few studies that have investigates the specific heat capacity of the bentonite buffer. Therefore, this paper presents a specific heat capacity prediction model for compacted Gyeongju bentonite buffer material, which is a Ca-bentonite produced in Korea. Specific heat capacity of the compacted bentonite buffer was measured using a dual probe method according to various degrees of saturation and dry density. A regression model to predict the specific heat capacity of the compacted bentonite buffer was suggested and fitted using 33 sets of data obtained by the dual probe method.

• Journal of the Korea Society for Simulation
• /
• v.17 no.4
• /
• pp.51-60
• /
• 2008

The purpose of this study is the use of simulation modelling to enhance productivity. In this paper, the optimal buffer allocation of small and medium size industries which produce solenoid valves for automobiles, is performed using simulations. The simulation model was developed under considerations of production layout, process & operation, process time, total work time, WIP, utilization, failure rate, and operation efficiency as inputs, and it was validated with careful comparisons between real behaviors and simulation outputs of the production line. Therefore, we can evaluate effects and changes in productivity when some strategies and/or crucial factors are changed. Although too large buffer could decrease productivity, the solenoid production line in this paper has been maintained large buffer. It is because reducing the size of buffer could result in the termination of the process. We determined the optimal number of buffers that could not cause any interrupt in productions using simulations. This simulation model considers diverse input variables which could influence productivity, and it is very useful not only for the production line of solenoid valves, but also for other production lines with various purposes, especially, small and medium size industries.