• The KIPS Transactions:PartC
• /
• v.9C no.4
• /
• pp.453-458
• /
• 2002

Recently, the number of hacking, that use buffer overflow vulnerabilities, are increasing. Although the buffer overflow Problem has been known for a long time, for the following reasons, it continuos to present a serious security threat. There are three defense method of buffer overflow attack. First, allow overwrite but do not allow unauthorized change of control flow. Second, do not allow overwriting at all. Third, allow change of control flow, but prevents execution of injected code. This paper is for allowing overwrites but do not allow unauthorized change of control flow which is the solution of extending compiler. The previous defense method has two defects. First, a program company with overhead because it do much thing before than applying for the method In execution of process. Second, each time function returns, it store return address in reserved memory created by compiler. This cause waste of memory too much. The new proposed method is to extend compiler, by processing after compiling and linking time. To complement these defects, we can reduce things to do in execution time. By processing additional steps after compile/linking time and before execution time. We can reduce overhead.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2708-2712
• /
• 2010

Amines, ammonia or 3-methoxypropylamine (MPA), are used to maintain the optimized pH for the prevention of corrosion in the secondary side of Pressurized Water Reactors (PWRs). They are differently dissociated as a function of temperature which is not same in each location of the water-steam cycle. pH at the operation temperature depends on temperature of fluid and equilibrium constants of water and amines. Thus, every amine provides the different pH in the entire secondary side so that pH is not only the sufficient parameter in corrosion control. The secondary parameter, i.e., buffer intensity, is the ability to maintain a stable pH when $H^+$ are added or removed due to the ingress of impurities or the reaction of corrosion. The buffer intensity is necessary to provide the selection criteria for the best pH control agent for secondary side and the basic understanding of the reason why the flow-accelerated corrosion(FAC) rate may demonstrate the bell-shape curve over temperature. The buffer intensities of ammonia and MPA were reviewed over the entire operation temperature of PWRs. The sufficient buffer intensity is provided for the inhibition of corrosion by ammonia in low temperature $(25{\sim}100^{\circ}C)$ and by DMA in high temperature $(150{\sim}250^{\circ}C)$. In terms of buffer intensity, i) the best pH control agent is an amine with $pK_a(T)$ range of pH(T)- $1{\leq}pK_a(T){\leq}pH(T)$ + 0.5 and ii) the amine solution should have sufficient buffer intensity, ${\beta}$ to inhibit corrosion, and iii) FAC rate may be maximum at the temperature, where ${\beta}_B/{\beta}$ ratio is lowest.

• Journal of Korean Society of Transportation
• /
• v.5 no.1
• /
• pp.75-83
• /
• 1987

The modernistic rationalism which thinks much of the mathematical rationality and economic efficiency is widely spread in Korea economic planning, urban planning, urban transportation planning, and the like. As a result the demands to humanity, amanity, and so on have been disregarded in the name of rationality in urban spatial organization, the typical examples, one of the pedestrian space. The pedestrian space which is passed over easily from the view point of the modernistic rationalism, is actually the space that should be reflected abundantly in urban space. The author emphasized a need of reconsideration on the position of pedestrian space in urban spatial planning process, and adopted the theoretical research on the functions and roles of pedestrian space. In consequence of this study the functions of pedestrian space are considered : the first, the function as a space for moving, the second, the function as a space for buffer. the third, the function as a space for intermediation. the fourth, the function as a space for urban daily life. the fifth, the function as new urban environment-making factor.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.8
• /
• pp.3-11
• /
• 2000

This paper considers the performance of a dynamic priority control function (DPCF) of a threshold-based Bernoulli priority jump (TBPJ) scheme. Loss-sensitive and delay-sensitive traffics are applied to a system with a TBPJ scheme that is a general state-dependent Bernoulli scheduling scheme. Loss-sensitive and delay-sensitive traffics represent sound and data, respectively. Under the TBPJ scheme, the first packet of the loss-sensitive traffic buffer goes into the delay-sensitive traffic buffer with Bernoulli probability p according to system states which represent the buffer thresholds and the number of packets waiting for scheduling. Performance analysis shows that TBPJ scheme obtains large performance build-up for the delay-sensitive traffic without performance degradation for the loss-sensitive traffic. TBPJ scheme shows also better performance than that of HOL scheme.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.1
• /
• pp.59-65
• /
• 1999

In this paper, we design a entorpy encoder of HDTV/DTV encoder blocks on the basis of MPEG-II. The designed entropy encoder outputs its bit stream at 9Mbps bit rate inserting zero-stepping block to protect the depletion of buffer in case that the generated bit stream is stored in buffer and uses not only PROM bit combinational circuit to solve the problem of critical path, and packer block, one of submerge, is designed to packing into 24 bit unit using barrel shifter, and it is constructed to blocks of header information encoder, input information delay, submerge, and buffer control. Designed circuits is verified by VHDL function simulation, as a result of performing P&R with Gate compiler that apply $0.8{\mu}m$ Gate Array specification, pin and gate number of total circuits has been tested to each 235 and about 120,000.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.25 no.4 s.34
• /
• pp.97-110
• /
• 1999

The new stick make-up product was studied by using a gel, which is a viscous complex formed with clay minerals, vitamins A and E and fluorinated liquid polymer with a 1500 molecular weight. The gel cannot be obtained with any random combination of clay minerals and the ingredients described above. It takes the sequential manufacturing method as follows to get this kind of gel. Firstly, clay minerals and liquid polymers have to be pre-mixed in order to saturate the liquid polymers with the clay minerals. Then the on-processed gel has to be finely crystallized. The clay minerals, which are the core elements for this gel, were used as a function of Binder & Buffer and liquid polymer was mixed together for the deterioration of the surface tension of each component and to form a functional film in the gel. This liquid polymer was combined with clay minerals because it is not miscible with most oils and solvents. Waxes have a function of keeping a solid status in the stick. We reduced the usage of waxes by putting clay minerals as buffer in the proportion of 0.5:1 with oil phase. Ceramide takes care of the skin when used regularly and maintains the skin's moisture. Vitamins A and E contribute to preventing skin aging by the activation of skin cells. We could get the stable viscous gel, which has about 80% oil phase using clay minerals and liquid polymer. The crystalline structures of gel were surface-chemically-analyzed using SEM and Image Analyzer and were thermodynamically analyzed using DSC. Surface tension test and softness were done by Rheometer. In the end, these characteristics were verified by consumer panel tests in Seoul, Daegeon and Pusan in Korea and Hokkaido, Osaka and Miyazaki in Japan with correlation to the climate.

• Proceedings of the SCSK Conference
• /
• 1999.10a
• /
• pp.97-110
• /
• 1999

The new stick make-up product was studied by using a gel, which is a viscous complex formed with clay minerals, vitamins A and I and fluorinated liquid polymer with a 1500 molecular weight. The gel cannot be obtained with any random combination of clay minerals and the ingredients described above. It takes the sequential manufacturing method as follows to get this kind of gel. Firstly, clay minerals and liquid polymers have ·to be pre-mixed in order to saturate the liquid polymers with the clay minerals. Then tile on-processed gel has to be finely crystallized. The clay minerals, which are the core elements for this gel, were used as a function of Binder & Buffer and liquid polymer was mixed together for the deterioration of the surface tension of each component and to from a functional film in the gel. This liquid polymer was combined with clay minerals because it is not miscible with most oils and solvents. Waxes have a function of keeping a solid status in the stick. We reduced the usage of waxes by putting clay minerals as buffer in the proportion of 0.5 : 1 with oil phase. Ceramide takes care of the skin when used regularly and maintains the skin’s moisture. Vitamins A and I contribute to preventing skin’aging by the activation of skin cells. We could get the stable viscous gel, which has about 80% oil phase using clay minerals and liquid polymer, The crystal 1 me structures of gel were surface-chemical1y-analyzed using SEM and Image Analyzer and were thermodynamically analyzed using DSC, Surface tension test and softness were done by Rheometer. In the end, these characteristics were verified by consumer panel tests in Seoul, Baegeon and Pusan in Korea and Hokkaido, Oska and Miyazaki in Japan with correlation to the climate.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.301-301
• /
• 2010

In order to enhance the efficiency of the organic solar cells, the effects of plasma surface treatment with using $CF_4$ and $O_2$ gas on the anode ITO were studied. The polymer solar cell devices were fabricated on ITO glasses an active layer of P3HT (poly-3-hexylthiophene) and PCBM ([6,6]-phenyl C61-butyric acid methyl ester) mixture, without anode buffer layer, such as PEDOT:PSS layer. The metallic electrode was formed by thermally evaporated Al. Before the coating of organic layers, ITO surface was exposed to plasma made of $CF_4$ and $O_2$ gas, with/without heat treatment. In order to identify the effect the surface treatment, the current density and voltage characteristics were measured by solar simulator and the chemical composition of plasma treated ITO surface was analyzed by using X-ray photoelectron spectroscopy(XPS). In addition, the work function of the plasma treated ITO surface was measured by using ultraviolet photoelectron spectroscopy(UPS). The effects of plasma surface treatment can be attributed to the removal organic contaminants of the ITO surface, to the improvement of contact between ITO and buffer layer, and to the increase of work function of the ITO.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.1
• /
• pp.67-79
• /
• 2001

The purpose of this research is to evaluate the biotope value in a metropolitan area after constructing the biotope evaluation model to develop biotope networking in the light of ecological landscape planning. In addition this study is to provide a basic frame of constructing the biotope networking system in the future with the evaluation results. The scope of this research is limited to high density residential area including some part of the forest adjacent to urban boundary. The results of the classified biotope in the research area have been turned out to be 24 patterns. According to the result of estimated nature value having the forth grade, three were forests combined with urban natural parks, schools near forests, and grasslands. There is a little place having first grade. We an deduce this fact that we have surveyed biotopes, having the minimum nature value and wider than children's park. As for the result of evaluated the structure, there were the forests of Seong-Dong, Meaho-Dong, and Kumho river, which is the forth grade. As for the evaluation of connection-function, the followings area were evaluated as the third grade-linear biotopes having highly valued and sustainable similarity - Seoul-Pusan Railroad, Dong-Daegu St., Kumho river, river basins. Bum대 park and a botanic park near Suesung lake, As for the evaluated the buffer-function, higly valued production biotopes, existing at a transition belt between he residential density areas, are Sawol-Dong, Meaho-Dong and Kumho river. When each of the indexes was evaluated, the core of the biotop contained most of natural biotopes. Large artificial biotopes were evaluated as an important biotopes, while small artificial biotopes were classified as a dot biotope. The future research on the concrete biotope networking construction, based upon performed evaluation in this research, should be conducted.

• Tunnel and Underground Space
• /
• v.20 no.4
• /
• pp.284-291
• /
• 2010

In the present design concept of a high-level waste repository, the bentonite and bentonite-sand mixture are considered as the buffer and backfill material. For the Kyungju bentonite which is a candidate material, the thermal conductivities of compacted bentonite and bentonite-sand mixture were measured. A correlation has been proposed to predict the thermal conductivity of the Kyungju bentonite and the bentonite-sand mixture as a function of the dry density, the water content and the sand fraction. The proposed correlation can predict the thermal conductivity with a difference less than 10% under the experimental conditions.