• 한국강구조학회 논문집
• /
• 제17권2호통권75호
• /
• pp.161-171
• /
• 2005

대칭 하중을 받는 아치 리브의 경우 면내 강성이 가해지는 하중에 비하여 작은 경우 예기치 않게 면내 방향으로 좌굴이 발생하게 된다. 아치 리브의 종국 면내 좌굴 강도는 재료의 비탄성이 고려되어야 한다. 하지만 탄성 면내 좌굴 강도는 세장비가 큰 경우에는 재료의 탄성 범위에서 좌굴이 발생하기도 하며, 세장비가 작은 경우에도 아치의 지간이나 라이즈, 단면의 개략적인 형태를 결정하는 초기 설계에 유용하게 사용된다. 본 논문에서는 아치 교량의 설계에 자주 이용되는 대칭 하중을 받는 포물선 아치 리브의 형상에 관하여 비선형 유한 요소 해석을 사용하여 탄성 면내 좌굴 강도에 대하여 연구를 수행 하였다. 연구 결과 기존의 탄성 좌굴 이론에서는 휨강성과 탄성 좌굴 강도는 비례하지만, 비선형 해석 결과 아치 단면의 세장비가 작을 경우 휨강성과 아치의 탄성 좌굴 강도가 비선형적인 관계를 보이는 것을 밝혔다.

• 한국강구조학회 논문집
• /
• 제24권6호
• /
• pp.735-742
• /
• 2012

본 연구에서는 세장판으로 구성된 중공강관(SHS)기둥에 CFRP쉬트로 보강하여 중심축하중 실험을 수행하였다. 총 6개의 실험체를 제작하였으며, 실험변수는 판폭두께비, 보강유무이다. 실험결과 사각단면의 두면은 안쪽으로 국부좌굴이 발생하였으며, 나머지 두 면은 바깥쪽으로 국부좌굴이 발생하였다. CFRP쉬트의 보강을 통해 최대 33%의 내력상승효과를 얻었으며, 초기강성과 연성능력을 비교하였다. 끝으로, 압축극한 내력을 산정식을 제안하여 실험값과 비교하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.71-74
• /
• 2005

In manufacturing automotive parts, such as engine cradles, frame rails, subframes, cross-members, and other parts from circular tubes, pre-bending and pre-forming operations are often required prior to the subsequent tubular hydroforming process. During some pre-forming operations, the cross section of a bent circular tube is crushed into an oval-like shape to ensure proper geometry and sufficient clearance in the hydroforming dies. For such applications, the use of oval Instead of circular tubes could be an effective means of eliminating the pre-forming step. The oval tube could also be produced with less thinning and with less strain on the outside of the bend when controlled by a booster system without the use of mandrel. Hence, the understanding of the issues that occur in the bending of oval tubes is worthy of Investigation. This paper presents parametric studies on the bending of oval tubes without a mandrel. The finite element modeling technique is used to examine the deformation characteristics for both circular and oval tubes. In the simulations, the bending process parameters of bend radius, aspect ratio of the tube ovalness, and tube wall thickness are varied. Observations are made to obtain a hoop-buckle limit diagram in terms of a non-dimensional shape degradation factor. Suggestions based upon developed criteria are made on the acceptability of bend tubes suitable for hydroforming applications without the need ofa pre-forming step or the used of a mandrel.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.335-335
• /
• 2011

Instability of a thin film attached to a compliant substrate often leads to emergence of exquisite wrinkle patterns with length scales that depend on the system geometry and applied stresses. However, the patterns that are created using the current techniques in polymer surface engineering, generally have low aspect ratio of undulation amplitude to wavelength, thus, limiting their application. Here, we present a novel and effective method that enables us to create wrinkles with a desired wavelength and high aspect ratio of amplitude over wavelength as large as to 2.5:1. First, we create buckle patterns with high aspect ratio of amplitude to wavelength by deposition of an amorphous carbon film on a surface of a soft polymer poly(dimethylsiloxane) (PDMS). Amorphous carbon films are used as a protective layer in structural systems and biomedical components, due to their low friction coefficient, strong wear resistance against, and high elastic modulus and hardness. The deposited carbon layer is generally under high residual compressive stresses (~1 GPa), making it susceptible to buckle delamination on a hard substrate (e.g. silicon or glass) and to wrinkle on a flexible or soft substrate. Then, we employ glancing angle deposition (GLAD) for deposition of a high aspect ratio patterns with amorphous carbon coating on a PDMS surface. Using this method, pattern amplitudes of several nm to submicron size can be achieved by varying the carbon deposition time, allowing us to harness patterned polymers substrates for variety of application. Specifically, we demonstrate a potential application of the high aspect wrinkles for changing the surface structures with low surface energy materials of amorphous carbon coatings, increasing the water wettability.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.349-356
• /
• 2000

Strenght and ductility are major factors in the aseismic design of a bridge pier. In spite of good performance in both steel piers have not been used widely due to high cost. But with the filled-in concrete the steel pier have advantages compare to the steel pier only such as improved strength ductility fast construction small section and reasonable cost. In this paper concrete-filled steel piers are tested using quasi-static cyclic lateral load with constant axial load to evaluate the performance. The secondary reinforcement devices such as bolts corner plate and turn buckle are used inside of the piers to improve the ductility with minimum additional cost. Test results shows filled-in concrete and secondary reinforcement devices increase the strength and the ductility of the steel pier.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2000
• /
• pp.381-388
• /
• 2000

The steel piers and the concrete-filled steel piers, in spite of reasonable strength, high ductility, small section, and fast construction, have not been considered as the alternatives to the RC piers even in the highly populated urban area where aseismic safety, limited space and fast construction are indispensably required. In this paper, a steel pier and 4 box type concrete-filled steel piers were tested with the quasi-static cyclic loading to estimate the ductility and the strength. Additional devices such as base rib, turn-buckle, and anchor bolted added at the to increase the ductility with minimum additional cost. The result showed that the concrete filled-in steel piers had higher energy absorbtion and strength than steel piers had, but also showed that slight overlooking in the design and fabrication could lead to the abrupt fracture just after small local buckling at the bottom.

• Interaction and multiscale mechanics
• /
• 제4권4호
• /
• pp.313-320
• /
• 2011

This paper proposes an approximate formulation to estimate the bifurcation buckling loads of cylindrical shells with soft elastic cores under the conditions of axial compression. In general, thin-walled, axially compressed cylindrical shells buckle into a diamond pattern in the elastic range. However, buckling symmetrical with respect to the axis of the cylinder may occur when the cylindrical shell is supported by an elastic medium. By considering this characteristic, we introduce the simplified approximate formulation that can give sufficiently accurate results for the bifurcation buckling loads of cylindrical shells. Moreover the results are compared with the exact buckling loads in order to confirm the accuracy of the proposed approximate formulation.

• Computers and Concrete
• /
• 제14권4호
• /
• pp.387-403
• /
• 2014

The aim of this study is to assess the structural performance of deteriorated reinforced concrete bridge piers, and to provide method for developing improved evaluation method. For a deteriorated bridge piers, once the cover spalls off and bond between the reinforcement and concrete has been lost, compressed reinforcements are likely to buckle. By using a sophisticated nonlinear finite element analysis program, the accuracy and objectivity of the assessment process can be enhanced. A computer program, RCAHEST (Reinforced Concrete Analysis in Higher Evaluation System Technology), is used to analyze reinforced concrete structures. Material nonlinearity is taken into account by comprising tensile, compressive and shear models of cracked concrete and a model of reinforcing steel. Advanced deteriorated material models are developed to predict behaviors of deteriorated reinforced concrete. The proposed numerical method for the structural performance assessment of deteriorated reinforced concrete bridge piers is verified by comparing it with reliable experimental results. Additionally, the studies and discussions presented in this investigation provide an insight into the key behavioral aspects of deteriorated reinforced concrete bridge piers.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.138-140
• /
• 2002

We fabricated textured Ni substrate for YBCO coated film and evaluated the degree of texture in terms of rolling condition and annealing time. The substrate was compacted from pure Ni powder and reduced the thickness to 100 $\mu$m by rolling followed by heat treatment. As decreasing the thickness of substrate, it was observed that the non-uniform deformation such as ‘wave edge’ or ‘wave buckle’ developed locally on it, causing reduced texture. On the other hand, uniformly deformed substrate showed better cube texture indicating the FWHM of in-plane and out-of-plane of about $11^{\circ}$ ~ $14^{\circ}$. In addition, annealing at $1000^{\circ}C$ for 1~ 8 hr did not make a remarkable difference on the texture.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.53-56
• /
• 2002

External low-velocity impact loadings onto the composites cause reduction of stiffness and/or strength. The reductions indicate that internal(external) damages were developed within the composites. These damages could be matrix cracking, fiber/matrix debonding, or delamination between layers. In previous studies, damage evaluation have been done by applying secondary mechanical loading such as buckle-driven compressive, or fatigue, or flexural loadings. An evaluation method by applying indentation loadings on the composites was proposed. The load-displacement curves obtained from the indentation testing provided the extent of damages within the composites due to impact loadings.