• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.46 no.4
• /
• pp.250-257
• /
• 2020

Objectives: Palatal infiltration is the most painful and uncomfortable anesthesia technique for maxillary impacted third molar surgery (MITMS). This approach could cause patients distress and aversion to dental treatment. The aim of this study was to evaluate the anesthetic efficacy of a buccal infiltration injection without a palatal injection in MITMS. Materials and Methods: This prospective research study was a crossover split mouth-randomized controlled trial. Twenty-eight healthy symmetrical bilateral MITMS patients (mean age, 23 years) were randomly assigned to two groups. Buccal infiltration injections without palatal injections were designated as the study group and the buccal with palatal infiltration cases were the control group, using 4% articaine and 1:100,000 epinephrine. The operation started after 10 minutes of infiltration. Pain assessment was done using a visual analogue scale and a numeric rating scale after each injection and extraction procedure. Similarly, the success rate, hemodynamic parameters, and additional requested local anesthetic were assessed. Results: The results showed that the pain associated with local anesthetic injections between both groups were significantly different. However, the success rates between the groups were not significantly different. Postoperative pain was not significant between both groups and a few patients requested an additional local anesthetic, but the results were not statistically significant. For hemodynamic parameters, there was a significant difference in systolic pressure during incision, bone removal, and tooth elevation. In comparison, during the incision stage there was a significant difference in diastolic pressure; however, other steps in the intervention were not significantly different between groups. Conclusion: We concluded that buccal infiltration injection without palatal injection can be an alternative technique instead of the conventional injection for MITMS.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.50 no.1
• /
• pp.13-23
• /
• 2023

The purpose of this study was to compare the values of tongue pressure (TP), lip closing pressure (LCP), right buccal pressure (RBP), and left buccal pressure (LBP) and check the intraoral muscle imbalance and observe the changed values according to the myofunctional therapy (MFT) period. The MFT with a prefabricated appliance was performed on patients with certain muscular dysfunctions due to oral habits. And the improvement of perioral muscles was evaluated using a balloon-based pressure measurement. The group consisted of 21 patients with oral habits such as chronic mouth breathing, finger sucking, lip sucking, tongue thrusting, and atypical swallowing habits. When comparing the two groups before treatment, there was a significant difference in TP and LCP values. The TP increased the most in the first month since the start of myofunctional therapy, and the LCP increased the most between 3 and 6 months after treatment began. The values of TP, LCP, RBP, and LBP in the control group measured before treatment were very similar to the results of the experimental group 6 months after the myofunctional therapy. When the MFT was steadily performed, it was possible to observe a noticeable increase in the tongue and lip closing pressure. At least 6 months of myofunctional therapy is recommended for patients with intraoral muscle imbalance due to oral habits.

• Journal of The Korean Dental Society of Anesthesiology
• /
• v.9 no.2
• /
• pp.108-115
• /
• 2009

Trauma to any nerve may lead to persistent paresthesia. Trauma to the nerve sheath can be produced by the needle. The patient frequently reports the sensation of an electric shock throughout the distribution of the nerve involved. It is difficult for the type of needle used in dental practice to actually sever a nerve trunk or even its fibers. Trauma to the nerve produced by contact with the needle is all that is needed to produce paresthesia. Hemorrhage into or around the neural sheath is another cause. Bleeding increases pressure on the nerve, leading to paresthesia. Injection of local anesthetic solutions contaminated by alcohol or sterilizing solution near a nerve produces irritation; the resulting edema increases pressure in the region of the nerve, leading to paresthesia. Persistent paresthesia can lead to injury to adjacent tissues. Biting or thermal or chemical insult can occur without a patient's awareness, until the process has progressed to a serious degree. Most paresthesias resolve in approximately 8 weeks without treatment. In most situations paresthesia is only minimal, with the patient retaining most sensory function to the affected area. In these cases there is only a very slight possibility of self injury. But, the patient complaints the discomfort symptoms of paresthesia, such as causalgia, neuralgiaform pain and anesthesia dolorosa. Most paresthesias involve the lingual nerve, with the inferior alveolar nerve a close second. This is the report of a case, that had the persistent paresthesia care on left lingual & buccal shelf regions after the lingual and long buccal nerve block anesthesia.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.20 no.4
• /
• pp.203-212
• /
• 2020

Background: This research evaluated the numbness produced by lignocaine at an equal or higher concentration than that of 4% articaine through a single point of injection for maxillary third molar surgery. This randomized double-blind study was conducted to compare the anesthetic efficiency of 4% lignocaine with that of 4% articaine in impacted maxillary third molar surgery using a single buccal infiltration alone. Methods: The study participants were 30 healthy patients requiring the bilateral surgical removal of symmetrically-positioned maxillary third molars. Using a split-mouth design, each patient randomly received buccal infiltration of 1.7 ml of 4% lignocaine and 1.7 ml of 4% articaine during two separate appointments. After 15 minutes of anesthetic injection, surgery was performed by the same surgeon using a consistent technique on both sides. Pinprick test pain scores of the buccal and palatal gingiva of the maxillary third molar after 10 minutes and 15 minutes latencies, pain scores during the surgery, the need for supplemental anesthesia, and patients' satisfaction with anesthetic efficiency were recorded. Surgery performed without supplemental anesthesia was categorized as successful. Results: The success rates of 4% lignocaine and 4% articaine (83.34% vs. 86.67%, P = 1.00) were not significantly different. Only 5 cases (4 cases in the articaine group and 1 case in the lignocaine group) reported mild pain and pressure sensation (NRS ≤ 1) on probing at the palatal side after 15 minutes of latency (P = 0.25). The pain scores of maxillary third molar surgery in the two groups were not significantly different (P > 0.05). Moreover, the statistical analysis confirmed the comparable patient satisfaction of two study groups (P = 0.284). Conclusion: This study provides evidence that single buccal infiltrations of 4% lignocaine and 4% articaine have comparable anesthetic efficacy and success rates for impacted maxillary third molar surgery. Both 4% lignocaine and 4% articaine can produce effective palatal anesthesia and pain control using buccal infiltration alone after 15 minutes of latency.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.1
• /
• pp.61-77
• /
• 2005

Statement of problem. The implant prosthesis has been utilized in various clinical cases thanks to its increase in scientific effective application. The relevant implant therapy should have the high success rate in osseointegration, and the implant prosthesis should last for a long period of time without failure. Resorption of the peri-implant alveolar bone is the most frequent and serious problem in implant prosthesis. Excessive concentration of stress from the occlusal force and biopressure around the implant has been known to be the main cause of the bone destruction. Therefore, to decide the location and angulation of the implant is one of the major considering factors for the stress around the implant fixture to be dispersed in the limit of bio-capacity of load support for the successful and long-lasting clinical result. Yet, the detailed mechanism of this phenomenon is not well understood. To some extent, this is related to the paucity of basic science research. Purpose. The purpose of this study is to perform the stress analysis of the implant prosthesis in the partially edentulous mandible according to the different nature locations and angulations using three dimensional finite element method. Material and methods, Three 3.75mm standard implants were placed in the area of first and second bicuspids, and first molar in the mandible Thereafter, implant prostheses were fabricated using UCLA abutments. Five experimental groups were designed as follows : 1) straight placement of three implants, 2) 5$^{\circ}$ buccal and lingual angulation of straightly aligned three implants, 3) 10$^{\circ}$ buccal and lingual angulation of straightly aligned three implants. 4) lingual offset placement of three implants, and 5) buccal offset placement of three implants. Average occlusal force with a variation of perpendicular and 30$^{\circ}$ angulation was applied on the buccal cusp of each implant prosthesis, followed by the measurement of alteration and amount of stress on each configurational implant part and peri-implant bio-structures. The results of this study are extracted from the comparison between the distribution of Von mises stress and the maximum Von mises stress using three dimensional finite element stress analysis for each experimental group. Conclusion. The conclusions were as follows : 1. Providing angulations of the fixture did not help in stress dispersion in the restoration of partially edentulous mandible. 2. It is beneficial to place the fixture in a straight vertical direction, since bio-pressure in the peri-implant bone increases when the fixture is implanted in an angle. 3. It is important to select an appropriate prosthodontic material that prevents fractures, since the bio-pressure is concentrated on the prosthodontic structures when the fixture is implanted in an angle. 4. Offset placement of the fixtures is effective in stress dispersion in the restoration of partially edentulous mandible.

• The korean journal of orthodontics
• /
• v.25 no.1 s.48
• /
• pp.101-110
• /
• 1995

The purpose of this study was to observe the tissue response to the orthodontic force applied immediately after buccal horizontal subapical osteotomy of maxilla. Five mongrel cats weighing about 2.5 Kg were used for this experiment. The left upper canine and premolar of each cat served as a experimental side and the right ones as a control side. On the experimental side, a 100gm orthodontic force was applied between the upper canine and premolar immediately after the osteotomy. On the control side, the same orthodontic force was applied without the osteotomy. After 7days, the experimental animals were sacrificed. The results were as follows: 1. In the pressure zones of the experimental group, significant increase of osteoclasts and direct resolution along the alveolar bone surface was observed as compared with those of the control group. 2. In the pressure 2ones of the experimental group, a less extensive hyalinized zone was observed than those of the control group. 3. In the pressure zones of both group, no root resorption was found. 4. Tn the tension zones of the experimental group, new bone deposition increased along the alveolar bone surface as compared with those of the control group. In conclusion, the results suggest the possibility that early orthodontic treatment after orthognathic surgery may have some benefits if the stability of the repositioned segment at surgery is secured.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.21 no.1
• /
• pp.61-69
• /
• 2021

Background: Inferior alveolar nerve block (IANB) using lidocaine 2% is commonly used for anesthetizing primary mandibular molars; however, this technique has the highest level of patient discomfort compared to other local anesthesia techniques. Therefore, alternative anesthesia techniques are necessary. The aim of this study was to evaluate the efficacy of a single buccal infiltration of 4% articaine with IANB using 2% lidocaine, for the bilateral extraction of primary mandibular molars. Methods: The present study was conducted on 30 patients aged between 6 and 9 years, who required the extraction of bilateral primary mandibular molars. The patients were randomly divided into two groups as follows: In the first session, Group A received IANB with lidocaine 2% and group B received infiltration with articaine 4%. In the second session, another injection method was performed on the opposite side. The Wong-Baker Facial Pain scale (WBFPS), Face Leg Activity Cry, and Consolability (FLACC), and physiologic parameters were used to assess pain perception. Results: The independent t-test showed no statistically significant difference in blood pressure and heart rate before and after extraction (P > 0.05). The mean FLACC index in the lidocaine and articaine groups was 0.89 and 1.36, respectively; there was no statistically significant difference between them (P > 0.05). According to the results of the chi-square test, there was no statistically significant difference between the groups for WBFPS (P > 0.05). Conclusion: The articaine infiltration technique may be an alternative to the IANB for the extraction of primary mandibular molars.

• The Journal of Korean Academy of Prosthodontics
• /
• v.21 no.1
• /
• pp.59-66
• /
• 1983

Distal extension partial dentures are supported by both the relatively rigid teeth and the resilient mucosa. So impression techniques of residual alveolar ridge in case of distal extension partial denture have particular importance in order to broad distribution of the masticatory force. McLean recognized the need for recording the tissues supporting distal extension partial denture base in functional form to equalize the resilient and non-resilient support, and this was called functional impression. Many investigators proposed various techniques of the functional impression for a distal extension partial denture, but only a little studies were performed about displacement of soft tissue under distal extension partial denture base. The purpose of this study is to investigate the amount of vertical displacement of the soft tissue under distal extension partial denture base by different functional impression techniques. Impression techniques used were Z.O.P. Impression, Selective Tissue Placement Impression, Functional Relining Impression. Measurement of the vertical displacement of soft tissue were made with Depth Gauge and Measuring Platform. A Anatomic Impression was used as a control. The results were tested statistically using 3 way ANOVA and Scheffe test. The followings were the results obtained from this study. 1. The greatest amount of soft tissue displacement was observed in the center of the retromolar pad. 2. No significant differences were found between the crest of alveolar ridge and the buccal shelf area. 3. The greatest soft tissue displacement was observed in Functional Relining Impression using Iowa wax, and the least displacement was observed in Selective Tissue Placement Impression using murcaptan rubber base. 4. No significant differences were found between finger pressure and biting pressure in Z.O.P. Impression, but greater displacement was observed by biting pressure than finger pressure in Functional Reling Impression.

• The Journal of Korean Academy of Prosthodontics
• /
• v.19 no.1
• /
• pp.39-45
• /
• 1981

Distal-extension removable partial dentures have long been implicated in the increase in mobility and the destruction of the supporting structures of the primary abutment teeth. Various clasping systems have traditionally been used to retain distal extension removable partial dentures, and other designs have been proposed to minimize torquing forces on the abutment teeth. Most recent studies investigating the effects of removable partial dentures on abutment teeth have been performed in it laboratory setting. Results obtained from in vitro research have given dentists insight into removable partial denture design, but laboratory test model cannot be constructed that simulates actual functional or parafunctiona1 movements and forces. The purpose of this study was to clinically evaluate the degree of tooth mobility produced by two clasping systems (suprabulge type and infrabulge type) used for distal extension removable partial dentures. Akers clasp and R.P.I. system were selected for the evaluation, and four patients required a distal extension removable partial denture on the mandibular arch were selected for participation in the study. Two partial dentures were constructed in the same condition expect the design of clasp. All abutments in the study were mandibular first or second premolars. Measurements of mobility were made with a research tool designed by $M\"{u}hlemann$. This instrument, periodontometer, measures tooth mobility in the mouth by means of a dial gauge accurated to 0.01mm when the tooth is stressed with a force meter. Lingual and buccal deflection of abutment tooth was measured using buccal and lingual pressure. The amount of force applied was 500gm. Tooth mobility tests were made at four key stages; 1. Before insertion of the first removable partial denture, baseline mobility was establsihed. 2. After wearing of the first prosthesis, measurement was made at weekly intervals for 4 weeks. 3. The removable partial denture was then taken from the patient, and tooth mobility was measured again at weekly intervals until the patient's established baseline mobility had returned. 4. The second prosthesis of different clasp design was worn for a month and evaluated in the same manner as the first. The sequence of placement of clasping system was alternated between patients. The following results were obtained from this study; 1. The mobility of abutment tooth increased during the initial stage of wear and returned to baseline mobility after removal of removable partial dentures. 2. The mobility of abutment tooth showed no difference between Akers clasp and I-bar clasp during the 4-week test period. 3. All teeth tested showed greater mobility toward the buccal than the lingual direction.

• Journal of Rhinology
• /
• v.25 no.2
• /
• pp.99-102
• /
• 2018

Lateral pharyngoplasty is a surgical option for treatment of obstructive sleep apnea (OSA). Here, we present a case involving a 40-year-old healthy man who underwent surgery, including lateral pharyngoplasty and robotic tongue base resection, for OSA. There were no intraoperative or immediate postoperative complications. However, on postoperative day 3, the patient presented with swelling in the temporal and buccal areas and was diagnosed with subcutaneous emphysema, later confirmed by computed tomography. The patient was carefully monitored under conservative care and discharged without complications. Although subcutaneous emphysema following tonsillectomy is a rare complication and usually resolves with conservative management, in certain cases, it might require surgical intervention. Lateral pharyngoplasty involves tonsillectomy and additional incision along the tonsillar fossa, which makes it susceptible to pharyngeal wall defects and, consequently, subcutaneous emphysema. Additionally, lateral pharyngoplasty and robotic tongue base resection cause pain and might thus contribute to the increase in intrapharyngeal pressure, which might aggravate subcutaneous emphysema. Lateral pharyngoplasty should be performed with meticulous dissection of the superior pharyngeal constrictor muscle. Healthcare providers should be aware of these complications and, upon suspicion of the same, place the patient under close observation to prevent life-threatening situations.