• Transactions on Electrical and Electronic Materials
• /
• 제13권2호
• /
• pp.89-92
• /
• 2012

The effect of organic impurities on the electrical properties of a neat epoxy resin was studied. 0.05, 0.5 and 1.0 phr of iso-propyl alcohol (IPA) and methylene chloride (MC) mixture (50/50 wt%) were used as impurities. The current density, volume resistance and impedance characteristics of the epoxy/IPA/MC systems were measured with a high voltage source meter and broadband dielectric spectroscopy. Glass transition temperature (Tg) was measured by a differential scanning calorimetry (DSC) and it was found that Tg decreased slightly with increasing IPA/MC content. It was also found that Tg values of the epoxy systems with various IPA/MC contents were closely related to the current density, volume resistance and impedance characteristics.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2006년도 춘계학술발표대회
• /
• pp.1207-1210
• /
• 2006

다양한 유 무선 통신 환경에서 사용되는 많은 종류의 사용자 단말은 프로세싱 능력과 가용 대역폭의 한계 등의 제한된 성능이 있지만 사용자는 일반 PC와 같은 성능의 응용 서비스를 요구한다. 하지만 서비스 제공자는 모든 단말 종류에 맞는 서비스를 제공하기 힘들다. 본 논문에서는 사용자 환경과 단말의 성능을 고려하지 않고, 전달 망의 자원 예약만으로 서비스를 제공하는 경우의 문제점을 개선하는 서비스 제어 관리자를 제안한다. 서비스 제어 관리자는 사용자 환경과 단말 능력에 맞는 서비스를 제공하기 위해서 서비스 품질 협상을 수행한다. 또, SIP 프락시 기능을 가지고 기존에 제안된 SIP 프로토콜 기반 서비스 제어 관리자들과의 연동한다. 이 때, 서비스 제공 과정에서 효율적으로 메시지를 전달하기 위해 새롭게 SIP 헤더를 제안한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.663-665
• /
• 2004

Ethernet-based passive optical network(EPON) technology is being considered as a promising solution for next-generation broadband access network. It must have the property of high efficiency, low cost, and support quality of service(QoS). A major feature for this new architecture is the use of a shared transmission media between all connected optical network unit(ONU). Hence, medium access control(MAC) arbitration mechanisms are essential for the successful implementation of EPON. In this paper we propose a simple dynamic bandwidth allocation(DBA) algorithm that improves the performance of network and supports IP-based multimedia applications with the bursty data traffic. In addition, we introduce analytic models of proposed algorithms and prove the system based on our algorithm to be asymptotically stable. Simulation results show the new DBA algorithm provides high bandwidth efficiency and low queueing delay of ONU in EPON.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 제13회 신호처리 합동 학술대회 논문집
• /
• pp.229-232
• /
• 2000

Orthogonal frequency division multiplexing(OFDM) has meanwhile become part of several telecommunicati ons standards, such as satellite and terrestrial digital audio broadcasting(DAB), digital terrestrial TV broad casting(DVB), asymmetric digital subscriber line(ADSL) for high-bit-rate digital subscriber services on twisted-pair channels, and broadband indoor wireless systems. In his paper, we show that OFDM signals contain sufficient structure to accomplish blind channel estimation using second order statistics only. This method doesn't require redundancy as cp in transmitter. And the result is compared with PSAM channel estimation as least square, linear minimum mean square, singular value decomposition.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.31-34
• /
• 2002

A study on the method that can measure the internal strain of composite materials is performed to monitor the health status of composite structures. A fiber optic sensor was constructed using the total reflected extrinsic Fabry-Perot interferometer(TR-EFPI) probe with a broadband light source. Result obtained from electrical strain gage adhered on the aluminum beam specimen was compared with that from the fiber optic TR-EFPI sensor and showed a good agreement. It was found that fiber optic TR-EFPI sensor system was adequate for monitoring the strain and thus failure processes in the interior of composite materials.

• 한국환경과학회지
• /
• 제18권8호
• /
• pp.927-932
• /
• 2009

Wind turbine noise become main environmental problem as wind energy have been installed all around. Noise from large wind turbine give annoyance to listener, moreover it increase loading to whole system by restricting blade tip speed. However accurate noise mechanism of wind turbine is not yet examined. This paper reviewed noise source and analysis theory. Broadband noise if main component of wind turbine noise and airfoil self noise is main noise source. These make acoustic analogy hard to apply for analysis. For this reason, experimental equation is method for wind turbine noise prediction up to now. Spectrum analysis shows that vortex shedding noise exists around $1k{\sim}2k$ Hz. This region is most sensitive frequency range to human. Thus it is necessary to reduce this noise source.

• Journal of electromagnetic engineering and science
• /
• 제5권1호
• /
• pp.36-42
• /
• 2005

In this paper, the optimal position of optical phase conjugator(OPC) excellently compensating distorted WDM channels with initial frequency chirp due to both chromatic dispersion and self phase modulation(SPM) is numerically investigated. Highly-nonlinear dispersion shifted fiber(HNL-DSF) is used as a nonlinear medium of OPC in order to widely compensate WDM signal band. It is confirmed that if the OPC position was shifted from mid-way of total transmission length dependence on the initial frequency chirp as well as modulation format and fiber dispersion coefficient, it is possible to cancel the performance degradation owing to the initial frequency chirp. Using proposed configuration, it is possible to remove all in-line dispersion compensator, reducing span losses and system costs in the long-haul broadband WDM systems.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제3권2호
• /
• pp.69-80
• /
• 1999

Recently in telecommunication, BISDN ( Broadband Integrated Service Digital Network ) has received considerable attention for its capability of providing a common interface for future communication needs including voice, data and video. Since all information in BISDN are statistically multiplexed and are transported in high speed by means of discrete units of 53-octet ATM ( asynchronous Transfer Mode ) cells, appropriate traffic control needs. For traffic shaping of voice, the output cell discarding scheme has been proposed. We analyze the scheme with a MMPP/$D_1$, $D_2$/1/B queueing system to obtain performance measures such as loss probability and waiting time distribution.

• 전기학회논문지
• /
• 제58권6호
• /
• pp.1241-1245
• /
• 2009

As FFT(Fast Fourier Transform) processor is used in OFDM(Orthogonal Frequency Division Multiplesing) system. According to increase requirement about mobility and broadband, Research about low power and low area FFT processor is needed. So research concern in reduction of memory size and complex multiplier is in progress. Increasing points of FFT increase memory area of FFT processor. Specially, SRU(Signal Reordering Unit) has the most memory in FFT processor. In this paper, we propose a reduced method of memory size of SRU in FFT processor. SRU of 64, 1024 point FFT processor performed implementation by VerilogHDL coding and it verified by simulation. We select the APEX20KE family EP20k1000EPC672-3 device of Altera Corps. SRU implementation is performed by synthesis of Quartus Tool. The bits of data size decide by 24bits that is 12bits from real, imaginary number respectively. It is shown that, the proposed SRU of 64point and 1024point achieve more than 28%, 24% area reduction respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1513_1514
• /
• 2009

This paper reports on a fabrication of novel substrate integrated waveguide (SIW)-based shielded stripline applicable to the broadband transverse electromagnetic (TEM) single-mode propagation. We suggested a structure for half-SIW and half-shielded stripline, which combined through the benzocyclobutene (BCB) bonding layer. The electrical interconnection between the sidewall of anisotropic wet-etched silicon and patterned BCB layers is measured subsequent to the metalization on the side wall. The proposed SIW-based shielded stripline has great potential in terms of simple fabrication, integration with planar circuits and monolithic system fabricated on a SIW structure.