• Journal of Advanced Navigation Technology
• /
• v.19 no.6
• /
• pp.607-613
• /
• 2015

In order to design M/W(microwave) short backhaul above 10 GHz to meet the increase in mobile traffic demand, the rain attenuation as well as the atmospheric conditions such as Earth bulge and Fresnel zone should be considered. In this paper, the path lengths have been estimated theoretically in various frequency bands using the Korean standard rain rate, and an example of path profile has been analyzed in urban area utilizing spectrum management intelligence system (SMIS). These derived minimum path lengths in various frequency bands are compared to the foreign them, and then will be proposed to improve the Korean minimum path length unitized to 10 km. This paper will provide useful information for microwave engineers in designing a M/W access link, and be utilized to make an efficient usage of high frequency bands for the short mobile broadband backhaul.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.8
• /
• pp.853-862
• /
• 2010

As the mobile device and broadband wireless internet such as WiBro, HSDPA is widely spreading, various types of advertisement and services based on personal location information can be provided. However, with convenience supported by these services, it is possible to be increased an invasion of privacy such as personal location and moving pattern. In this paper, we analysis an essential element for protection of privacy related on location information in mobile environment and propose location privacy protocol for managing location privacy self-control. And we design and implementation prototype of location privacy self-control system which is able to manage user's location privacy condition oneself using the proposed location privacy protocol.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9A
• /
• pp.867-875
• /
• 2005

In this paper, we fabricated along distance wireless communication transmitter and receiver over the 100 which used NRD technology. To make the transmitter and receiver of 400Hz band using the non radiative dielectric wave guide, transmitter was composed of gm oscillator, m modulator and antenna, receiver was composed of local gum oscillator, balanced mixer, 3dB direction coupler and antenna. Also we executed a wireless communication image transmission examination to the transmitter and receiver. We receive the image information in real-time data transmission from receiver after we send the image signal in the wireless distance of the 10km. Therefore, the 400Hz band U transmitter and receiver to be developed will be used widely for the transmission system CATV or broadband transmission system. This will be utilized also to the link device of a long distance high speed wireless communication network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.1C
• /
• pp.28-36
• /
• 2011

As Power Line has been already installed over 60% of a residential area all over the world, Broadband Service has been possible using high-speed PLC(Power Line Communication) without new access line installed for Internet access. Because of such reason, PLC is researched as the most suitable service for Last Mile Solution. But, Power Line is designed for transmitting electric power, so peripheral Wireless Communication System is affected by a leak of electric wave. In this paper, we propose a High Performance Notch Filter algorithm in comparison with a existing notch filter for reduction of interference between existing Wireless Communication Service and Power Line Service. In addition, we implement the Notch Filter emulator appling a High Performance Notch Filter and using a embedded board.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.8
• /
• pp.12-20
• /
• 1998

All-optical networks(AON) are emerging as the next generation broadband networks for wide-area and local-area networks. Many optical switch architectures are currently proposed to realize AON. Specially, optical switches using WDM have a lot of advantages in point of the optical transparency and network topology for B-ISDN services in AON. In this paper, two kinds of Knockout Optical Switching Architectures(KOSA) are proposed for high speed optical ATM networks. We use WDM technologies for them to operate in all-optical area and they are called Architecture-Ⅰ, Architecture-Ⅱ respectively. Each one represents different characteristics according to the number of components and the kind of components, which make KOSA have different performance and system complextity. In order to verify and to compare the performance, these architectures were analyzed and simulated in terms of cell loss ratio, system complexity and buffering speed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.196-201
• /
• 1995

The broadband and discrete sources of sound in small cooling fans of propeller type and centrifugal type were investigated to understand the turbulent vortex structures from many bladed fans using ANSI test plenum for small air-moving devices (AMDs). The noise measurement method uses the plenum as a test apparatus to determine the acoustic source spectral density function at each operating conditions similar to real engineering applications based on acoustic similarity laws. The characteristics of fans including the head rise vs. volumetric flow rate performance were measured using a performance test facility. The sound power spectrum is decomposed into two non-dimensional functions: an acoustic source spectral distribution function F(St,.phi.) and an acoustic system response function G(He,.phi.) where St, He, and .phi. are the Strouhal number, the Helmholtz number, and the volumetric flow rate coefficient, respectively. The autospectra of radiated noise measurements for the fan operating at several volumetric flow rates,.phi., are analyzed using acoustical similarity. The rotating stall in the small propeller fan with a bell-mouth guided is mainly due to a leading edge separation. It creates a blockage in the passage and the reduction in the flow rate. The sound power levels with respect to the rotational speeds were measured to reveal the mechanisms of stall and/or surge for different loading conditions and geometries, for example, fans installed with a impinging plate. Lee and Meecham (1993) studied the effect of the large-scale motions like impinging normally on a flat plate using Large-Eddy Simulation(LES) and Lighthill's analogy.[ASME Winter Annual Meeting 1993, 93-WA/NCA-22]. The dipole and quadrupole sources in the fans tested are shown closely related to the vortex structures involved using cross-correlations of the hot-wire and microphone signals.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.1B
• /
• pp.51-59
• /
• 2011

It is the background that the provision of the mobile WiMAX femtocell trial service of a leading mobile telecommunication service operator using small base stations for indoor mobile broadband services and coverage expansion through eliminations of shadow areas in this paper. The paper presents an analysis result of trial subscribers' usage satisfaction for the mobile WiMAX femtocell service and suggests a market approach strategy of a mobile WiMAX femtocell service based on the analysis result. The interesting influence factors are extracted from wide influence factors suggested by existing research literature related with mobile service usage satisfaction and confined to a system quality, a service quality, and an account structure with consideration for attributes of mobile WiMAX femtocell service under exploring its early stages of service market. And then we analyze impacts of the factors to the mobile WiMAX femtocell service usage satisfaction. As a result, a system quality and an account structure have a tendency to provide considerable impacts to subscribers' usage satisfaction for mobile WiMAX femtocell service which is immature in both its technology and market. Therefore a market approach with the preferential consideration of the two factors will be valid.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.1B
• /
• pp.21-28
• /
• 2011

The femtocell is a miniaturized Base Station (BS) with low-cost and low-power using general broadband access network as backhaul. It is expected not only to improve indoor coverage but also to reduce a service charge. However, in IEEE 802,16e femtocells, when the Mobile Station (MS) scans neighbor BSs for handover, it takes a long time due to too many number of femto BSs. Also the size of the neighbor advertisement message that will be periodically sent by a serving BS is increased as the number of target femto BSs for scanning increases. In this paper, we proposed an efficient femtocell scanning scheme, using a triangulation mechanism and a femto BS monitoring scheme to reduce the number of scanning operations and the size of the neighbor advertisement messages. The proposed scheme can avoid wasting air resources and reduce scanning overheads by minimal scanning operation. The simulation results showed that the proposed scheme could improve scanning performance and avoid wasting air resources, compared with the conventional scheme of the IEEE 802.16e system.

• Journal of Korea Game Society
• /
• v.12 no.4
• /
• pp.13-22
• /
• 2012

The wide-spread use of the broadband Internet service makes the cloud computing-based gaming service possible. A game program is executed on a cloud node and its live image is fed into a remote user's display device via video streaming. The user's input is immediately transmitted and applied to the game. The minimization of the time to process remote user's input and transmit the live image back to the user and thus satisfying the requirement of instant responsiveness for gaming makes it possible. However, the cost to build its servers can be very expensive to provide high quality 3D games because a general purpose graphics system that cloud nodes are likely to have for the service supports a single 3D application at a time. Thus, the server must have a technology of 'realtime multiple rendering' to execute multiple 3D games simultaneously. This paper proposes a new architecture of 2-tier servers of clouds nodes of which one group executes multiple games and the other produces game's live images. It also performs a few experimentations to prove the feasibility of the new architecture.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.2
• /
• pp.41-51
• /
• 2004

In this paper, the beam steering dipole phased array antenna systems for IMT-2000 base station have been designed. The designed beam steering dipole phased array antenna systems are constituted by the antenna part and the beam steering control system part. The antenna part is designed by the proposed flat dipole for the broadband characteristics, and the 8${\times}$8 dipole array antenna is constructed by the proposed flat dipole for the directional radiation pattern. Besides the vertical power divider is designed for the vertical power distribution. The beam steering control system part is designed the horizontal power divider for the horizontal power distribution, the 4-bit phase shifters and the driving circuit of phase shifters for the horizontal beam tilting. In order to evaluate a performance of the designed antenna systems, they were fabricated and the radiation characteristics were measured. From the measured results, we found that the horizontal beams were tilted by the each control signals, and the measured radiation characteristics showed good agreement with the design goals.