• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5A
• /
• pp.751-762
• /
• 2000

In the forthcoming next generation highspeed networks, the provisioning of broadband mobile multimedia services is the most important issue while an efficient network management architecture, which can manage the network resources efficiently, is essential. The next generation highspeed networks will be composed of the ATMand SDH-based transport network systems and the H-based interworking systems. The management functions of these network systems are implemented various technologies, such as TMN and SNMP. In order to integrate these network resources efficiently with heterogeneous management functions, the distributed network management architecture such as TINA is most appropriate. In this pape, we propose an interworking architecture for TINA manager and TMN agent. where the TINA-based EML subnetwork management operations mapped into the related management operations of the TMN NE agent. The proposed interworking architecture is simpler than JIDM, and the processing overhead is minimized.

• Journal of Communications and Networks
• /
• v.9 no.4
• /
• pp.446-456
• /
• 2007

Increased access to broadband networks has led to a fast-growing demand for voice and video over IP(VVoIP) applications such as Internet telephony(VoIP), videoconferencing, and IP television(IPTV). For pro-active troubleshooting of VVoIP performance bottlenecks that manifest to end-users as performance impairments such as video frame freezing and voice dropouts, network operators cannot rely on actual end-users to report their subjective quality of experience(QoE). Hence, automated and objective techniques that provide real-time or online VVoIP QoE estimates are vital. Objective techniques developed to-date estimate VVoIP QoE by performing frame-to-frame peak-signal-to-noise ratio(PSNR) comparisons of the original video sequence and the reconstructed video sequence obtained from the sender-side and receiver-side, respectively. Since processing such video sequences is time consuming and computationally intensive, existing objective techniques cannot provide online VVoIP QoE. In this paper, we present a novel framework that can provide online estimates of VVoIP QoE on network paths without end-user involvement and without requiring any video sequences. The framework features the "GAP-model", which is an offline model of QoE expressed as a function of measurable network factors such as bandwidth, delay, jitter, and loss. Using the GAP-model, our online framework can produce VVoIP QoE estimates in terms of "Good", "Acceptable", or "Poor"(GAP) grades of perceptual quality solely from the online measured network conditions.

• Earthquakes and Structures
• /
• v.8 no.6
• /
• pp.1363-1386
• /
• 2015

The October 23 2011 Van Earthquake is studied from an earthquake engineering point of view. Strong ground motion processing was performed to investigate features of the earthquake source, forward directivity effects during the rupture process as well as local site effects. Strong motion characteristics were investigated in terms of peak ground motion and spectral acceleration values. Directiviy effects were discussed in detail via elastic response spectra and wide band spectograms to see the high frequency energy distributions. Source parameters and slip distribution results of the earthquake which had been proposed by different researchers were summarized. Influence of the source parameters on structural response were shown by comparing elastic response spectra of Muradiye synthetic records which were performed by broadband strong motion simulations of the earthquake. It has been emphasized that characteristics of the earthquake rupture dynamics and their effects on structural design might be investigated from a multidisciplinary point of view. Seismotectonic calculations (e.g., slip pattern, rupture velocity) may be extended relating different engineering parameters (e.g., interstorey drifts, spectral accelerations) across different disciplines while using code based seismic design approaches. Current state of the art building codes still far from fully reflecting earthquake source related parameters into design rules. Some of those deficiencies and recent efforts to overcome these problems were also mentioned. Next generation ground motion prediction equations (GMPEs) may be incorporated with certain site categories for site effects. Likewise in the 2011 Van Earthquake, Reverse/Oblique earthquakes indicate that GMPEs need to be feasible to a wider range of magnitudes and distances in engineering practice. Due to the reverse faulting with large slip and dip angles, vertical displacements along with directivity and fault normal effects might significantly affect the engineering structures. Main reason of excessive damage in the town of Erciş can be attributed to these factors. Such effects should be considered in advance through the establishment of vertical design spectra and effects might be incorporated in the available GMPEs.

• Journal of the Korea Convergence Society
• /
• v.8 no.7
• /
• pp.1-6
• /
• 2017

This paper presents the design of a frequency measurement device using ADC, EP2AGX FPGA and STM32 processor to accurately measure the frequency of a broadband high frequency signal. The ADC device used in this paper has a sampling frequency of 250 MSPS and a processing frequency bandwidth of 100 MHz. Due to its high sampling frequency, it is difficult to process in ordinary computers or processors, so we implemented the frequency measurement algorithm using the Altra EP2AGX FPGA. The measured frequency is sent to the direction detection controller in real time and fused with the phase signal to calculate the incident azimuth angle of the high frequency signal. The designed frequency measurement device is about 0.2 Mhz in frequency measurement error and 30% less than Anaren DFD-x, which is considered to contribute greatly to the design of radio monitoring and direction detection device.

• The KIPS Transactions:PartC
• /
• v.19C no.2
• /
• pp.119-126
• /
• 2012

This paper covers the service quality of packet-based voice service that is provided over wireless broadband (WiBro) and high speed downlink packet access (HSDPA) systems. Using a measurement software that has been developed in the course of preparing a advanced service quality management scheme for the packet-based voice service over wireless networks, a huge scale of experiment is conducted to measure the real quality of the voice service. Based on our analysis of the measurement results, the service quality of the voice service is supposed to be quite good over both wireless systems. In addition, another experiment to investigate the effect of degradation of wireless transmission conditions on the service quality of the voice service shows the values of wireless service metrics in which mean opinion score (MOS) starts to decrease.

• The KIPS Transactions:PartC
• /
• v.16C no.1
• /
• pp.57-64
• /
• 2009

In order to efficiently provide IP based Wireless Broadband services in Mobile WiMAX, schemes for more efficiently utilizing a limited bandwidth in radio links are needed. Robust Header Compression (ROHC), a standard header compression scheme proposed by IETF, Bi-directional Optimistic (O) mode provides higher compression efficiency and robustness compared with Payload Header Suppression (PHS) which is an optional header compression scheme for mobile WiMAX [1, 2]. However, if consecutive packet losses occur because of a Shadow Region of Mobile WiMAX or bit errors, header decompression failure rate of the ROHC O mode increases due to inconsistency of the compression information between the Compressor and the Decompressor. Therefore, a complementary mechanism is needed. In this paper, we propose an approach for the dynamic adjustment of an optimistic parameter, which has an effect on both the compression efficiency and the robustness, for improving the performance of ROHC O mode. We also analyze the performance of the proposed approach using an OPNET simulator.

• The KIPS Transactions:PartC
• /
• v.19C no.1
• /
• pp.1-8
• /
• 2012

Recently, due to the development of broadband, there is a significant increase in utilizing on-demand Saas (Software as a Service) which takes advantage of the technology. Nevertheless, the academic and practical levels of digital forensics have not yet been established in cloud computing environment. In addition, the data of user behavior is not likely to be stored on the local system. The relevant data may be stored across the various remote servers. Therefore, the investigators may encounter some problems in performing digital forensics in cloud computing environment. it is important to analysis History files, Cookie files, Temporary Internet Files, physical memory, etc. in a viewpoint of client, since the SaaS basically uses the web to connects the internet service. In this paper, we propose the method that analysis the usuage trace of the Saas which is the one of the most popular cloud computing services.

• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.8
• /
• pp.357-368
• /
• 2013

Our society has evolved into a fully connected society in a mixed reality environment enabling various knowledge sharing / management / control / creation due to the expansion of broadband ICT infrastructure, smart devices, cloud services and social media services. Therefore cyber threats have increased with the convenience. The society of the future can cause more complex and subtle problems, if you do not have an effective response to cyber threats, due to fusion of logical space and physical space, organic connection of the smart object and the universalization of fully connected society. In this paper, we propose the strategy to build knowledge-base as the basis to actively respond to new cyber threats caused by future various environmental changes and the universalization of fully connected society.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.9
• /
• pp.1734-1741
• /
• 2007

In this paper, the Hybrid SC/MRC-2/4 method in which bit synchronization and phase synchronization were not required was applied to the orthogonal MC DS-CDMA system in which each normalized subcarrier interval and processing gain had the same value, respectively, and the direct sequence spread code of each subcarrier was orthogonal. In the broadband wireless system in which multi-carrier transmission was used, a Doppler frequency shift occurred, which was caused by the difference between the highest subcarrier frequency md the lowest subcarrier frequency. In order to complement phase error caused by the shift, the orthogonal MC DS-CDMA system was analyzed so that the receiving signal could be perfectly synchronized by adjusting the PLL gain suitable for the entire system. As a result of simulations, as the PLL gain was increased, the change in the intervals was close to the case of perfect synchronization however, it became less when the PLL gain reached more than a certain value. Therefore, by selecting a proper PLL gain suitable for the system the orthogonal MC DS-CDMA can be designed in which the Hybrid SC/MRC method is applied.

• Journal of Platform Technology
• /
• v.9 no.4
• /
• pp.60-70
• /
• 2021

This paper proposes a method capable of stably tracking the coordinates of a patterned laser image in a curved screen shooting system using two or more channels of multiple cameras. This method can track and acquire target points very effectively when applied to a multi-screen shooting method that can replace the HMD shooting method. Images of curved screens with severe deformation obtained from individual cameras are corrected through image normalization, image binarization, and noise removal. This corrected image is created and applied as an Euclidean space map that is easy to track the firing point based on the matching point. As a result of the experiment, the image coordinates of the pattern laser were stably extracted in the curved screen shooting system, and the error of the target point position of the real-world coordinate position and the broadband Euclidean map was minimized. The reliability of the proposed method was confirmed through the experiment.