• 한국산학기술학회논문지
• /
• 제16권10호
• /
• pp.6839-6845
• /
• 2015

본 논문에서는 다수의 안테나가 필요한 다양한 기능의 광대역 무선 통신 시스템을 한 개의 안테나로 구현하기 위한 슬리브 모노폴 안테나의 광대역 특성 최적화 설계 방법을 제시하였다. 이를 위하여 슬리브 모노폴 안테나의 슬리브 부분이 개방형 스터브로 동작한다는 이론적 해석을 바탕으로 내부 모노폴과 슬리브 부분으로 구성되는 슬리브를 동축 선로로 동작하도록 하고 동축 선로의 특성 임피던스를 조절하여 슬리브의 임피던스 변환회로의 기능을 증대하였다. 슬리브 모노폴 안테나의 넓은 대역폭 확보를 위하여 두꺼운 모노폴을 사용하였고 슬리브의 임피던스 정합 회로로의 특성을 향상하기 위하여 동축 선로 역할을 하는 슬리브의 반경과 슬리브 내부를 구성하는 유전체의 유전율을 조절하여 슬리브 모노폴 안테나의 임피던스 대역폭을 최적화하였다. 두꺼운 모노폴을 사용하고 슬리브를 최적화하여 설계한 슬리브 모노폴 안테나는 반사 계수 10 dB 기준으로 0.80 GHz ~ 2.43 GHz 대역폭을 만족하는 3:1이 넘는 광대역 특성을 보였다. 제안한 슬리브 모노폴 안테나는 상용 이동 통신 주파수 대역에서 다기능 시스템에서 요구되는 다수의 안테나를 한 개의 안테나로 대체 가능할 것으로 기대한다.

• 한국전기전자재료학회논문지
• /
• 제17권7호
• /
• pp.770-775
• /
• 2004

Although $High-T_c $superconducting HTS antennas have high efficiency and high gain, narrow bandwidth due to the high Q is the major limitation for application of satellite communication and mobile communication. Defining bandwidth as the frequency range over which standing wave ratio (SWR) is 2:1 or less, HTS antenna bandwidths are typically less than 1 %. Thus considerable effort has been focused on developing HTS antennas for broadband operation. In this work the HTS antenna array, using the bipin antenna which consisted of two triangle-radiation patches, was designed and fabricated using a ${YBa}_2{Cu}_3{O}_7x (YBCO)$ superconducting thin film on a MgO substrate for broadband operation. Also gold antennas with the same dimension as our HTS antennas were fabricated on the MgO substrate for the comparison. Experimental results for both antennas were reported in terms of radiation patterns, return losses, bandwidths and other various characteristics. The center frequency of HTS antennas was 20.28 GHz and the bandwidth obtained was significant 10 %.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 추계종합학술대회
• /
• pp.210-213
• /
• 2001

본 논문에서는 광대역 동작을 위한 나비형 안테나의 임피던스 특성을 분석했다. 펄스 표면하 레이더는 지중 매설물에 대한 정보를 수집하기 위하여 임펄스를 사용하므로, 이러한 임펄스의 광대역 특성으로 인하여 급전점에서 발생하는 반사를 최소화할 수 있도록 광대역 정합 특성을 가진 안테나가 사용되어진다. 따라서, 본 논문에서는 광대역 특성을 가지는 나비형 안테나를 Ensemble 5.0으로 분석하였다.

• Journal of electromagnetic engineering and science
• /
• 제16권1호
• /
• pp.52-56
• /
• 2016

This paper suggests a class-F power amplifier with split open-end stubs to provide a broadband high-efficiency operation. These stubs are designed to have wide bandwidth by splitting wide open-end stubs into narrower stubs connected in shunt in an output matching network for class-F operation. In contrast to conventional wideband class-F designs, which theoretically need a large number of matching lines, this method requires fewer transmission lines, resulting in a compact circuit implementation. In addition, the open-end stubs are designed with slant ends to achieve additional wide bandwidth. To verify the suggested design, a 10-W class-F power amplifier operating at 1.7 GHz was implemented using a commercial GaN transistor. The measurement results showed a peak drain efficiency of 82.1% and 750 MHz of bandwidth for an efficiency higher than 63%. Additionally, the maximum output power was 14.45 W at 1.7 GHz.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권4호
• /
• pp.483-490
• /
• 2011

본 논문에서는 주기적 접지구조(PAGS)를 이용하여 실리콘 RFIC 반도체 기판상에 다단 임피던 스변환기를 제작 평가하였다. 제작된 임피던스변환기의 면적은 종래의 약 8.7 %인 0.026 $mm^2$이며, 8 ~ 49.5 GHz의 범위에서 양호한 RF특성을 보여주었다.

• Journal of Communications and Networks
• /
• 제8권4호
• /
• pp.410-421
• /
• 2006

In this work, we propose an analytic framework for dimensioning the link capacity of broadband access networks which provide universal broadband access services to a diverse kind of customers such as patient and impatient customers. The proposed framework takes into account the flow-level quality of service (QoS) of a connection as well as the packet-level QoS, via which a simple and systematic provisioning and operation of the network are provided. To that purpose, we first discuss the necessity of flow-aware network dimensioning by reviewing the networking technologies of the current and future access network. Next, we propose an analytic model for dimensioning the link capacity for an access node of broadband convergence networks which takes into account both the flow and packet level QoS requirements. By carrying out extensive numerical experiment for the proposed model assuming typical parameters that represent real network environment, the validity of the proposed method is assessed.

• 대한전자공학회논문지TC
• /
• 제43권5호
• /
• pp.68-76
• /
• 2006

본 논문에서는 저잡음 특성을 지닌 광대역 비간섭성 광원 (BLS: Broadband Light Source)을 제안하고 이를 방송 및 통신의 통합 서비스를 제공하는 파장 분할 다중방식 수동형 광 가입자망 (WDM-PON: Wavelength Division Multiplexing-Passive Optical Network)에 적용함으로써 경제적인 광가입자망의 가능성을 시험하였다. 제안된 BLS는 경제적인 WDM-PON용 광원인 파장 잠김된 패브리 페롯 레이저 다이오드 (wavelength-locked F-P LD: wavelength-locked Fabry-Perot Laser Diode)를 위한 외부 주입 광원으로 사용되어 파장 무의존성 (color-free operation, i.e., wavelength independent operation)을 지닌 고밀도 WDM-PON (DWDM-PON: Dense WDM-PON)의 구현을 가능하게 한다. 또한 오버레이 (overlay) 방식의 방송 서비스를 위한 광원으로 응용되어 영상 및 화상 중심으로 융합된 서비스를 효율적으로 수용할 수 있는 광대역 통합망의 가능성을 시험하였다.

• 세라미스트
• /
• 제22권1호
• /
• pp.56-69
• /
• 2019

Recent advances in low-power sensors and transmitters are driving the search for standalone power sources that utilize unused ambient energy. These energy harvesters can alleviate the issues related to the installation and maintenance of sensors. Particularly piezoelectric energy harvesters, with the ability to convert ambient mechanical energy into useful electricity, have received significant attention due to their high energy density, low cost and operational stability over wide temperature and pressure conditions. In order to maximize the generated electrical power, the natural frequency of the piezoelectric energy harvester should be matched with the dominant frequency of ambient vibrations. However, piezoelectric energy harvesters typically exhibit a narrow bandwidth, thus, it becomes difficult to operate near resonance under broadband ambient vibration conditions. Therefore, the resonating of energy harvesters is critical to generate maximum output power under ambient vibration conditions. For this, energy harvesters should have broadband natural frequency or actively tunable natural frequency with ambient vibrations. Here, we review the most plausible broadband energy harvesting techniques of the multi-resonance, nonlinearity, and self-resonance tuning. The operation mechanisms and recent representative studies of each technique are introduced and the advantages and disadvantages of each method are discussed. In addition, we look into the future research direction for the broadband energy harvester.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1145-1150
• /
• 2008

In this paper, We studied efficient design of wireless transmission system for unified data transmission in a subway and railway. It is increased that need of broadband multimedia service to make useful environment for user and to support the operation of railway system. High bandwidth is better if we need more services. But, high bandwidth requires more cost at tunnel of subway. More bandwidth make receive sensitivity to bad. So it need more wireless Station. We deduced best bandwidth of subway wireless transmission system reflecting the cost of installation and efficiency of system. Consequently, we decide efficient service model of broadband wireless system at a subway. Subway broadband wireless transmission system is tested in this year, and it is to be extended to province subway. Cost of subway broadband wireless transmission system is saved, because the system can be efficiently designed. Therefore, the effectiveness is expected to be very big.

• Journal of Communications and Networks
• /
• 제8권4호
• /
• pp.480-484
• /
• 2006

This paper briefly reviews ITU-T recommendations associated with multi protocol label switch (MPLS) and Ethernet operation, administration, and maintenance (OAM). The broadband convergence network (BcN) architecture with a centralized network controller is introduced. An aggregation structure employing Ethernet, MPLS, and time division multiplexing (TDM) signal is presented for the BcN. A physical link failure scenario is examined to investigate how the maintenance signal is propagated between different layers.