• 전기학회논문지
• /
• 제58권6호
• /
• pp.1157-1165
• /
• 2009

In AC-PDP, it is necessary to achieve high luminance efficiency, high luminance and high definition by adopting technologies such as high xenon concentration, MgO doping, and long gap. However, it is very difficult to apply above technologies because they make the driving voltage margin reduced. Especially, high Xe concentration technology for high efficacy makes not only the driving voltage margin reduced but also the stability of reset discharge decreased at low temperature. In this paper, we studied temperature and voltage dependent stability of reset discharge and present the experimental results of the discharge characteristics at low temperature. In addition, we suggested the mechanism of bright noise and black noise at low temperature. Finally, we proposed double reset waveform to improve the bright noise and descending scan time method to improve the black noise.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.482-488
• /
• 2000

This paper deals with a method to generate an acoustically bright zone that has a higher acoustic potential energ than the others. The acoustically bright zone can be generated by optimally excited multiple sources. A method to determine the volume velocity distribution of the sources was presented in this paper. For different applicative purpose, two kinds of cost functions are defined and through the eigenvalue analysis the optimal solution is obtained.

• 한국방사선학회논문지
• /
• 제15권5호
• /
• pp.731-739
• /
• 2021

이 연구는 산업현장에서 구조물의 용접부 검사를 디지털 방사선을 이용한 비파괴검사를 효과적으로 수행할 수 있도록 디지털 방사선의 밝기 교정과 중첩 영상에 따른 신호 대 잡음 비와 기본 공간 분해능을 비교분석 하였다. 평판형 용접 시험편을 대상으로 ⁷⁵Se 방사선원을 사용하였고 촬영 전 밝기 교정과 영상 중첩을 세분화하여 총 130장의 영상을 획득하였다. 연구 결과, 밝기 교정의 수와 영상 중첩의 수가 증가할수록 신호 대 잡음 비가 향상됨을 확인하였다. 기본 공간 분해능은 촬영된 영상 모두 기준치를 만족하였다. 산란 방사선을 대비한 납 차폐를 설치 후 촬영한 영상을 비교하여 신호 대 잡음 비가 비슷함을 확인하였다. 영상 중첩이 증가할수록 신호 대 잡음 비가 증가하지만, 방사선의 노출시간이 증가하면서 작업자의 피폭 및 작업 효율에 영향을 미치기 때문에 적절한 촬영기법을 강구 한다면 좋은 상질의 디지털 방사선 영상을 획득 할 수 있을 것으로 사료된다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -2
• /
• pp.851-854
• /
• 2000

Digital halftoning is a technique to make an equivalent binary image from scanned photo or graphic images. Low pass filtering characteristic of human visual system can be applied to get the effect of spatial averaging of local area consisted of black and white pixels for gray image. The overlapping of black dot decreases brightness and black dot is very sensitive to human visual system in the bright region. In this paper, for gray-level expression, only bright gray region in the color image is considered for blue noise mask (BNM) approach. To solve this problem, BNM with CMY dot is used for the bright region instead of black dot. Dot-on-dot model with single mask causes the problem making much black dot overlap, color distortion. Therefore approach with three masks for C, M and Y each is proposed to decrease pixel overlap and color distortion.

• 한국전기전자재료학회논문지
• /
• 제22권3호
• /
• pp.239-247
• /
• 2009

In AC-PDP, it is necessary to achieve high luminance efficacy, high luminance and high resolution by adopting technologies such as high Xenon concentration, MgO doping, and long gap. However, it is very difficult to apply above technologies because they reduce driving voltage margin. For example, doping of MgO reduces driving voltage but introduces new problems such as increased temperature dependency of discharge, which result in larger variations in driving margin at different temperatures. In this paper, we present the experimental results of the characteristics of temperature-dependent discharges. In addition, we suggest the mechanism of bright noise, black noise, and high temperature mis-discharge, which depend on temperature-dependent characteristics of MgO.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.445-446
• /
• 2012

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.506-509
• /
• 2006

Shaped Sound Focusing is defined as the generation of acoustically bright shape in space using multiple sources. The acoustically bright shape is a spatially focused region with relatively high acoustic potential energy level. In view of the energy transfer, acoustical focusing is essential because acoustic energy is very small to use other type of energy. Practically, focused sound shape control not a point is meaningful because there are so many needs to enlarge the focal region especially in clinical uses and others. If focused sound shape can be controlled, it offers various kinds of solutions for clinical uses and others because a regional focusing is essentially needed to reduce a treatment time and enhance the performance of transducers. For making the shaped-sound field, control variables, such as a number of sources, excitation frequency, source positioning, etc., should be taken according to geometrical sound shape. To verify these relations between them, wavenumber domain matching method is suggested because wavenumber spectrum can provide the information of control variables of sources. In this paper, the procedures of shaped sound focusing using wavenumber domain matching and relations between control variables and geometrical sound shape are covered in case of an acoustical ring.

• 대한전자공학회논문지SP
• /
• 제40권1호
• /
• pp.1-9
• /
• 2003

본 논문에서는 밝은 영역에서 K(Black) 대신에 C(Cyan), M(Magenta), Y(Yellow)를 공간적으로 흩어서 출력하는 새로운 방법을 제안하였다. 어두운 영역에서 검은 점의 겹침은 밝기값을 감소시키며 밝은 영역에서의 검은 점은 인간 시각 체계에 민감하다. 따라서 이러한 문제를 해결하기 위해서 하나의 마스크로 CMY를 동시에 사용하는 새로운 방법이 제안되었으며, CMY 점이 검은 점 대신에 밝은 영역에서 공간적으로 흩어서 출력된다. 그리고 어두운 영역의 그레이 값을 고려하기 위해서 톤 곡선 연결을 하였다. 기존의 방법에서 BNM(Blue Noise Mask)는 높은 낟알 특성(granularity)과 밝기값 범위가 좁은데 반하여, 제안한 방법은 낮은 낟알 특성과 넓은 밝기 범위와 높은 대비도를 가진다. 제안한 방법이 기존의 방법보다 공간적으로 다른 리치에 세 배에 해당하는 점을 사용하기 때문이다. 따라서 제안한 방법은 더 많은 공간적인 정보를 표현하고 기존의 BNM 방법과 비교하여 더욱 원 영상과 유사하게 표현할 수 있다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권12호
• /
• pp.3166-3179
• /
• 2013

A pre-processing system for adaptive noise removal is proposed based on the principle of identifying and filtering object regions and background regions. Human perception of images depends on bright, well-focused object regions; these regions can be treated with the best filters, while simpler filters can be applied to other regions to reduce overall computational complexity. In the proposed method, bright region segmentation is performed, followed by segmentation of object and background regions. Noise in dark, background, and object regions is then removed by the median, fast bilateral, and bilateral filters, respectively. Simulations show that the proposed algorithm is much faster than and performs nearly as well as the bilateral filter (which is considered a powerful noise removal algorithm); it reduces computation time by 19.4 % while reducing PSNR by only 1.57 % relative to bilateral filtering. Thus, the proposed algorithm remarkably reduces computation while maintaining accuracy.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.638-643
• /
• 2007

With development of high display quality of TV and Monitor, personal audio system is arising great interest. In this study, we applied a method to make a good bright zone around the user and dark zone to other region by maximizing the ratio of sound energy between the bright and dark zone. We have attempted to use a line speaker array system to localize the sound in our listening zone. It depends on the size of the zone and array parameters, for example, array size, speaker spacing, wave length of sound.