• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.102-102
• /
• 2018

Electronic industry had required the finer size and the higher performance of the device. Therefore, 3-D die stacking technology such as TSV (through silicon via) and micro-bump had been used. Moreover, by the development of the 3-D die stacking technology, 3-D structure such as chip to chip (c2c) and chip to wafer (c2w) had become practicable. These technologies led to the appearance of HBM (high bandwidth memory). HBM was type of the memory, which is composed of several stacked layers of the memory chips. Each memory chips were connected by TSV and micro-bump. Thus, HBM had lower RC delay and higher performance of data processing than the conventional memory. Moreover, due to the development of the IT industry such as, AI (artificial intelligence), IOT (internet of things), and VR (virtual reality), the lower pitch size and the higher density were required to micro-electronics. Particularly, to obtain the fine pitch, some of the method such as copper pillar, nickel diffusion barrier, and tin-silver or tin-silver-copper based bump had been utillized. TCB (thermal compression bonding) and reflow process (thermal aging) were conventional method to bond between tin-silver or tin-silver-copper caps in the temperature range of 200 to 300 degrees. However, because of tin overflow which caused by higher operating temperature than melting point of Tin ($232^{\circ}C$), there would be the danger of bump bridge failure in fine-pitch bonding. Furthermore, regulating the phase of IMC (intermetallic compound) which was located between nickel diffusion barrier and bump, had a lot of problems. For example, an excess of kirkendall void which provides site of brittle fracture occurs at IMC layer after reflow process. The essential solution to reduce the difficulty of bump bonding process is copper to copper direct bonding below $300^{\circ}C$. In this study, in order to improve the problem of bump bonding process, copper to copper direct bonding was performed below $300^{\circ}C$. The driving force of bonding was the self-annealing properties of electrodeposited Cu with high defect density. The self-annealing property originated in high defect density and non-equilibrium grain boundaries at the triple junction. The electrodeposited Cu at high current density and low bath temperature was fabricated by electroplating on copper deposited silicon wafer. The copper-copper bonding experiments was conducted using thermal pressing machine. The condition of investigation such as thermal parameter and pressure parameter were varied to acquire proper bonded specimens. The bonded interface was characterized by SEM (scanning electron microscope) and OM (optical microscope). The density of grain boundary and defects were examined by TEM (transmission electron microscopy).

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.3
• /
• pp.92-103
• /
• 2015

Development of new concrete bridge deck system with FRP plank using as a permanent formwork and the main tensile reinforcement recently has been actively conducted. Concurrent use as a reinforcing material and a permanent formwork, it is possible to reduce the construction time and construction costs than the usual concrete slab. In this study, an experiment was carried out for the bond stress between cast-in-place concrete and the type of FRP plank using as a permanent formwork. The interfacial fracture energy that can be one of the most important parameters were evaluated for adhesion performance and bond stress to know the characteristics of the failure mechanism of the adhesion surface. Interfacial fracture energy of normal concrete is 0.24kN/m of GF11 case, in the case of GF21, 0.43kN/m appears, in the case of CF11 and GF31, 0.44kN/m and 0.46kN/m respectively it appeared. In case of RFCON, 0.52kN/m appears from GF12, the CF12 and GF22, 0.51kN/m and 0.36kN/m appeared each case.

• Journal of Periodontal and Implant Science
• /
• v.36 no.3
• /
• pp.661-671
• /
• 2006

The purpose of this study was to evaluate cumulative survival rate (CSR, %) of mandibular posterior single tooth implants replaced with ITI SLA (sand-blasted, large-grit, acid-etched) implant system and compare the CSR between first and second molar. The findings from the results were as follows; 1. Total of 158 implants were inserted into 147 patients. 68 patients were males, 79 patients were females and their mean age was 47.8 years. 98 implants were placed in first molar area and 60 implants were placed in second molar area. In terms of diameter, implants with wide diameter over 4.8mm dominated (91.1%). Implants with length over lOmm were used (96.2%). 2, In the two cases, there was a slight transient numbness which recovered within 1-2 months. Nine SynOcta screw type abutments demonstrated screw loosening, There were ten cases of crown fallen-out from decementation. 3. Only one failed out of 158 implants. The CSR was 99.4%. The CSRs for first molar and second molar were 99% and 100%, respectively. From the results, it was concluded that single tooth replacement implant in the mandibular posterior area, might be considered as the effective treatment modality comparable to the conventional crown and bridge.

• Journal of the Korea Concrete Institute
• /
• v.29 no.1
• /
• pp.23-32
• /
• 2017

The joints between precast PSC slabs of the intermediate road slab in double deck tunnel are inevitably generated in the road traffic vehicle traveling direction. Therefore, it is important to make the behavior of parts on the joint in one piece. The imtermediate road slab system of double deck tunnel in great depth proposed in this study will be constructed with precast PSC slab in order to minimize the construction period. And the joint connection between the precast slab has been developed in two methods: the 'Transverse tendon reinforcement method' and 'High strength bolts connection method'. Also, the experiments were performed for the full scale model in order to evaluate the performance of the intermediate road deck slab with two type joints systems, the structural stability was verified through the F.E.M analsysis. The results of static loading test and F.E.M analysis investigated a very stable behavior of intermediate road deck slab in double deck tunnel applying the joint methods developed in this study, in the cracks and deflections to satisfy the design standards of Highway Roads Bridges (2011), it was determined that there is no problem even servicebility.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.601-611
• /
• 2016

The research, development and use of seismic isolation systems have been increasing with the gradual development of structure safety assurance methods for earthquakes. The High Damping Rubber Bearing (HDRB), one type of seismic isolation system, is a Laminated Rubber Bearing using special High Damping Rubber. However, as its damping function is slightly lower than that of the Lead Rubber Bearing, a similar seismic isolation system, its utilization has not been high. However, the HDRB has a superior damping force to the Natural Rubber Bearing, which has similar materials and shapes, and the existing Lead Rubber Bearing has a maleficence problem in that it contains lead. Thus, studies on HDRBs that do not use lead have increased. In this study, a test targeting the HDRB was done to examine its various dependence properties, such as its compressive stress, frequency and repeated loading. To evaluate the HDRB's seismic performance in response to several earthquake waves, the shaking table test was performed and the results analyzed. The test used the downscaled bridge model and the HDRB was divided into seismic and non-seismic isolation. Consequently, when the HDRB was applied, the damping effect was higher in the non-seismic case. However, its responses on weak foundations, such as in Mexico City, represented increased shapes. Thus, its seismic isolator.

• Journal of Navigation and Port Research
• /
• v.27 no.4
• /
• pp.425-430
• /
• 2003

The satellite navigation system is widely used for identifying a user's position regardless of weather or geographic conditions and also make effect on new technology of marine LBS(Location Based Service). which has the technology of geographic information such as the ENC. Generally, there are conceivable systems of marine LBS such as ECDIS, or ECS that use the ENC itself with powerful processor in installed type on ships bridge. Since the ENC is relatively heavy structure with dummy format for data transfer between different systems, we should reduce the ENC to small and compact size in order to use it in mobile platform. In this paper, we assumed that the mobile system like PDA, or Webpad can be used for small navigation or information system in marine field. We considered the reduction of the ENC size to make them fit well to small capability of mobile platform. However, the ENC should be updated periodically by update profile data produced by HO. If we would reduce the ENC without a consideration of update, we could not get newly updated data furthermore. As summary, we studied considerations for ENC reduction with update capability. It will make the ENC be useful in many low performance platforms for various applications.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.447-447
• /
• 2016

홍수 시 하천을 따라 유하되는 유송잡물(잡목, 생활쓰레기 등)은 구조물에 집적이 이루어지며 이로 인해 물의 흐름을 방해하고 구조물 주변의 지반을 약화시키거나 월류로 인해 심각한 피해를 야기 시킨다. 교량의 경우 유송잡물의 집적은 교각의 항력을 증가시켜 전도파괴를 유발시킬 수 있으며, 교각주변 흐름교란을 통한 하상세굴로 인해 기초부를 파괴시키기도 한다. 또한 통수단면적 증가로 인해 높아진 수위는 제방을 월류시켜 재산 및 인명피해를 유발하기도 한다. 암거의 경우 유송잡물을 포함한 토사로 인해 단면폐색 및 침식으로 암거의 파괴를 발생시키고 이로인해 도로의 단절을 가져오기도 한다. 이러한 유송잡물에 대한 차단대책은 현재 까지 유지관리를 통한 방법만이 최선책으로 제시되고 있다. 본 연구는 국외에서 소개되고 있는 유송잡물 피해저감시설을 대상으로 축소모형실험을 통해 효과를 확인하고 이를 통해 저감시설의 효율에 대해 소개하고자 하는 것이 주목적이다. 유송잡물 저감시설은 교량의 경우 수직분리대 방법, 우회말뚝 방법, 스위퍼를 이용한 방법으로 소개하고 있으며 이들 방법의 특징은 유송잡물 우회를 통해 집적을 저감하는 방식이다. 암거의 경우 수직분리대 방법, 스크린 방법, 우회스크린을 이용하는 방법 등이 있으며 수직분리대는 교량과 마찬가지로 우회방식을 기본방식으로 스크린 방식은 유송잡물의 차단을 원칙으로 하고 있다. 실험의 결과는 교량과 암거의 차단시설 유무에 따른 유송잡물의 집적률을 대상으로 하였다. 차단시설이 없는 경우 교량에서의 집적률은 97.9% ~ 99.2%의 집적률로 나타났다. 수직분리대의 경우 유송잡물 집적률은 49.3%, 우회말뚝은 0.0% ~ 4.2%의 범위로 매우 높은 차단효과를 보이고 있었다. 스위퍼방식의 경우 집적률은 5.3% ~ 20.9%로 나타났다. 이러한 결과로 판단하였을 때 차단시설 설치로 인한 교량에 대한 직접적인 차단효과는 수직분리대 < 스위퍼 < 우회말뚝 순으로 높은 차단효과를 보이는 것으로 나타났다. 그러나 우회말뚝에서의 집적률이 한계치를 넘어선다면 유송잡물로 인해 흐름교란, 수위 및 하상변동, 말뚝의 유실 등으로 인한 피해가 예상된다. 암거대상 유송잡물 차단시설 실험결과는 수직분리대의 경우 type과 투하방법에 따라 차이가 있지만 집적률은 14.7% ~ 64.9%의 범위로 나타났다. 스크린과 우회스크린 방식은 유송잡물의 우회가 아닌 차단이 목적이므로 유송잡물 집적에 의한 수위상승이 우려되는바 수위영향을 검토하였다. 검토결과 스크린 설치로 인한 수위상승이 우회스크린보다 높게 상승하는 것으로 나타났다. 이러한 결과는 스크린의 형태적인 측면에서 2면을 통해 집적되는 특성을 갖는 우회스크린이 통수단면적을 많이 확보하기 때문이다. 따라서 국부적인 수위상승으로 인한 피해를 저감하기 위해서는 설치여건이 허용된다면 통수단면적 확보가 유리한 우회스크린 설치가 유리할 것으로 판단된다.

• Journal of the Korean Society for Railway
• /
• v.20 no.3
• /
• pp.329-338
• /
• 2017

A recent trend of technical development in auxiliary-power-supplies (APS) is to replace 60Hz low frequency transformers with isolated type dc/dc converters. This paper introduces the technical trend in APS structures and proposes a power converter circuit suitable for high-efficient and light-weight APS. By utilizing the resonant converter, which achieves ZCS, to reduce switching losses, various types of APS structures (1-stage and 2-stage) are reviewed, and they are verified by simulation. The full-bridge resonant LLC converter is designed with a 1-stage power converting structure; the resonant converter topology is designed with a 2-stage power converting structure that has a pre-regulator converter to compensate for the wide input voltage range. Both a step-down converter and a step-up converter are designed and compared for the pre-regulator in the 2-stage structure. Operational characteristics are compared with simulation results and loss analyses are presented to proposes appropriate system structure and topologies.

• (The) Research of the performance art and culture
• /
• no.18
• /
• pp.379-412
• /
• 2009

According to "Jinjak-yigwe(進爵儀軌)", a special banquet was held at Yungyungdang(演慶堂, a kind of royal theatre) to celebrate the 40th birthday of Queen Soonwon(純元王后) in 1828. This banquet is famous for the presentation of nineteen new Jungjae(呈才) repertoires that the Crown Prince Hyomyung(孝明) created. In order to explore the theoretical basis for the reproduction and presentation of Yungyungdang(演慶堂) Jinjak(進爵, a type of royal banquets), in this article, the imagination and experience of the presentation of Yungyungdang Jinjak are pursued, while focussing on audience's reception. In Yungyungdang Jinjak, King Soonjo(純祖), Queen Soonwon and the prince were the special audience; they participated in the procedure of Ye(禮, etiquette of ceremony) and also were considered as the characters of certain repertoire of Jungjae. Hyomyung arranged the spectacles from the myths of Taoist gods and immortal hermits, as well as historic episodes of the past emperors' elegant tastes of music. These mythic and historic images lead the audience toward the imagination and experience on the transcendental world. Hyomyung, managing the administration as the representative of King Soonjo, tried to show absolute royal authority through the splendid performances of Yungyungdang Jinjak, so as to overcome the politicaly difficult situation. He set up the sacred world for his father King Soonjo, distinct from the secular ordinary world, and emphasized his position as the bridge between the two sides. He expressed his filial duty through the devotion of performing arts to display absolute royal authority.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.3
• /
• pp.179-184
• /
• 2019

In many countries, such as developing countries where electricity is scarce, small wind turbines in the form of Off Grid are an effective solution to solve power supply problems. In some countries, the expansion of power systems and the decline of electricity-intensive areas have led to the use of small wind power in urban road lighting, mobile communications base stations, aquaculture and seawater desalination. With this change, the size of the small wind power industry is expected to have greater potential than large-scale wind power. In the case of small wind power generators, the generator is controlled at a variable speed, and the voltage and current generated by the generator have many harmonic components. To solve this problem, the AC to DC converter to be studied in this paper is a three-phase step-up type converter with a single switch. The inductor current is controlled in discontinuous mode, and has a characteristic of having a unit power factor by eliminating the harmonic of the input current. The proposed converter is composed of LCL filter and three phase rectification boost converter at the input stage and a single phase full bridge for grid connection. It is a control system with energy storage system(ESS) that the system stabilization can be pursued against the electric power.