• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.219-224
• /
• 2006

In this paper, to verify the safety of railway vehicle structure, we describe the test methods of roof structure. The purpose of GM/RT 2100' missile protection article is to minimise the risk of injury which could result from the penetration into a vehicle body by missile such as stones and bricks. we carried out weight drop test on the roof structure in accordance with GM/RT 2100. The test results showed that the penetration did not occer.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2006.11a
• /
• pp.447-450
• /
• 2006

본 연구는 국내에서 발생되는 소각재를 재활용하여 벽돌 생산을 하는 공장에서의 이원화된 작업현황을 일원화 할 수 있는 데이터 모니터링 시스템 구축을 목적으로 한다. 이를 위하여 RFID 센싱 기술을 생산 공정에 도입하여 공정관리 시스템을 획기적으로 개선할 수 있도록 하였다. 각종 계측기 및 센서의 신호를 데이터 수집 장치인 IDMC-Net8842를 이용하여 실시간으로 수집하고 유/무선 통신 모듈을 이용한 TCP/IP 연결을 통하여 모니터링 서버에 접속하여 실시간으로 현장의 상황을 확인하여 제어할 수 있는 시스템을 구축하고자 한다.

• Journal of the Korean Professional Engineers Association
• /
• v.28 no.1
• /
• pp.119-125
• /
• 1995

To make the Leathen Bricks, We needed the hollouning Couchitions 1) During the water smoking, we must burn out the organic matenials completely by 600$^{\circ}$C 2) The optimum tempenatune to make the briks wan 1000$^{\circ}$C~1050$^{\circ}$C 3) The mixing ratio of the leathr dust was 6~8%

• Journal of the Korean GEO-environmental Society
• /
• v.4 no.4
• /
• pp.25-34
• /
• 2003

This paper is focused on an experimental study in order to investigate the utilization of sewage sludge ash as the cover and liner materials for the waste disposal landfill or as construction materials. A series of tests were performed to evaluate the basic properties, compaction, compressive strength, consolidation, permeability, and CBR of sewage ash. Specially, clay bricks were made as increasing replacement ratio of sewage ash (such as 5, 10, 15, 20, 25, 30%). And tests were fulfilled for its quality. Bentonite and lime were used as the additives to improve permeability properties of sewage sludge ash. As a result of tests, it was shown that the permeability coefficient decreases as increasing bentonite content and the percentage of bentonite was roughly needed 20% to keep the permeability coefficient below $1{\times}10^{-7}cm/sec$. The results of unconfined compression tests show that sewage ash meets the criteria of the unconfined compression strength for cover material. It was shown that the compressive strength decreases as increasing the replacement ratio of sewage sludge ash and the maximum replacement ratio of sewage sludge ash to satisfy the quality standards of the third degree bricks was about 15%.

• Journal of architectural history
• /
• v.18 no.4
• /
• pp.63-79
• /
• 2009

Since the 1970's, UNESCO and ICOMOS have adopted or emphasized on the principles of historic preservation. One of them is what to require a repair have not to be repaired beyond the limits of the features and techniques to have been born in those days of establishment. On the premise, this paper is to examine the materials and technique of lime plaster work in order for roof ridge, and for bond paste of stones and bricks in government constructions in the late of Joseon dynasty(17~19c). The result of this examination will come up with a basic conformity in the case of repairing the building established in the late of Joseon dynasty. This paper is carried out for the proper repair and restoration of architectural cultural properties. Construction reports and other documents in those days are examined for the study. Following conclusions have been reached through the study. The components of old plaster mixtures which agglutinate stones each other were quicklime, perilla oil, and paper fiber. The components of old plaster mixtures which point joint of black bricks consisted of slaked lime, perilla oil, paper fiber, and cereal starch. These components were the same as coat surface of roof ridges. In the case of times, one of the following sand, white clay, sap of boiled elm bark was added to these components for the purpose of high efficiency. These materials and techniques which applied to plaster work of those buildings had developed in the process of making royal tombs. But these materials and techniques were quite different from the present.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.5
• /
• pp.301-306
• /
• 2017

Wire electrical discharge machining (WEDM) process was evaluated to slice Silicon (Si) for various applications. Specifically, various Si workpieces with various resistances, such as single and multi crystalline Si bricks and wafers were used. As conventional slicing processes, such as slurry-on or diamond-on wire slicing, are based on mechanical abrasions between Si and abrasive, there is a limitation to decrease the wafer thickness as well as kerf-loss. Especially, when the wafer thickness is less than $150{\mu}m$, wafer breakage increases dramatically during the slicing process. Single crystalline P-type Si bricks and wafers were successively sliced with considerable slicing speed regardless of its growth direction. Also, typical defects, such as microcracks, craters, microholes, and debris, were introduced when Si was sliced by electrical discharge. Also, it was found that defect type is also dependent on resistance of Si. Consequently, this study confirmed the feasibility of slicing single crystalline Si by WEDM.

• Journal of Korea Multimedia Society
• /
• v.15 no.4
• /
• pp.472-484
• /
• 2012

Raised or plain block is widely used for the pedestrian's safe passage. The insincere construction, insufficient maintenance and obstacle overlaid on the pavement cause pedestrian's accidents. This paper proposes a method to detect brick path by analyzing the shape pattern and texture feature of brick located in visible distance for a safe passage. A brick appears to a regular type because of its specific shape which repeats with its sized gap and its type varies according to the surrounding environment or use. This paper shows a method which extracts the shape pattern by analyzing single surface polygon and its frequency appearing in road area. The shape pattern is used to detect similar shape regions. Some regions are not detected because extraneous substances or chopped bricks distort the original shape. This problem can be solved by analyzing the texture feature vector. The analyzed vector of the previously detected regions yields the Gaussian distribution. This value in each undetected region is computed and checked whether it's satisfied with Gaussian distribution or not. The satisfied region is detected as the brick path. The experiment was performed with the various type's bricks to recognize so that the results showed as accurate as 95.9% in average.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6504-6513
• /
• 2013

The result can be summarized as follows. First, the following periodically changing characteristics were examined:roof form(gambrel/hipped-flat-gable), structure of roof and wall(wood-framed-cement masonry-RC-Light iron framed), roof material(thatched-tiled-slate-cement/steel sheet-asphalt/sandwich panel/mortar water-proofing), wall material(clay plaster/lime plastered-dressing tile/bricks-painting on the cement plastering-native stone dressing/siding/tile), fence material(masonry of stone and cement bricks), and courtyard materials(clay and concrete). Secondly, the regionally changing characteristics of those elements, rural housing structure, roof form, roof structure material, wall finishing material, fence and courtyard material in the outer space, differed according to the location of rural housing, i.e.north, middle, south region. The changing characteristics of both the roof structure and wall structure are similar to those of the three regions.

• Journal of architectural history
• /
• v.12 no.2 s.34
• /
• pp.7-20
• /
• 2003

The main buildings of the important Buddhist temples - the pagoda, the Buddhist sanctum, the lecture hall - was surrounded by the cloister until Koryo Dynasty. And the Buddhist sanctum was located the center. It meant that the Buddhist sanctum was important building. It is very important thing that we understand the usage of the interior space because the architectural space consists of the unified space by the organic function of the interior space and the exterior space. But there is not so much the study on the interior space of the Buddhist sanctum. So, the purpose of this study is to understand of the interior space of the Buddhist sanctum in Ancient and Medieval Times. Till now, it was impossible that the Buddhist monk or the General public entered the Buddhist sanctum in Ancient and Medieval Times because they regarded the Buddhist sanctum as the place of sacrosanctity and the floor was finished by bricks. But, we saw that they could enter the Buddhist sanctum. Of course the floor of the Buddhist sanctum was finished by bricks, but they spread mats on the floor, took off his shoes in the interior space and used the furniture for sitting on. The plan of the Buddhist sanctum was designed by the process of the ceremony and the way of the enshrinement of the Buddhist statues because it is the place to enshrine the Buddhist statues. They performed the ceremony like as pray, worship, offer food to Buddha, HaengDo - an act to turn round an object of worship - and so on in the interior space of the Buddhist sanctum.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.9
• /
• pp.857-861
• /
• 2010

Recently photochemical smog has become a serious urban air pollution. And VOC is the major pollutant for it. With the advance of industrialization and urbanization, MSWI fly ash and sewage sludge and melting slag were generated. It is necessary to de-toxificate ashes, because they contain many toxic constituents and probably lead to contaminate the environment. The objective of this research was to prepare multi-functional brick which is able to remove VOCs in ambient air. The bricks were made of MSWI fly ash, sewage sludge and slag. The benzene adsorption experiment by brick was acted to evaluate its adsorptivity. And also photocatalyst material was coated to enhance its adsorptivity and the endurance on the brick. According to the result, the benzene showed 74~96%. The removal efficiency was increased and the breakpoint time was lengthened by coating a brick.