• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.4
• /
• pp.590-600
• /
• 2005

The present report has been aimed at reviewing important factors which need to be closely analyzed or considered when increasing the market weight of finishing pigs. The pig market weight has increased worldwide during the past few decades, which is attributable primarily to an increased lean gain potential of finishing pigs. To increase the market weight, however, the acceptability of larger pigs by the packer as well as pork consumers should be met first. By increasing the market weight, total number of breeding stock, as well as the facility for them, necessary for producing a given weight of pork can be reduced, whereas more building space for finishing pigs and an additional nutrition program for the later finishing period are needed. Additionally, a more thorough disease prevention program especially against ileitis and mycoplasma pneumonia may also be needed, because outbreaks of these are known to increase with increasing body weight over 110 kg. Some larger finishing pigs may deposit excessive fat that may be reduced or prevented by using hormonal and/or nutritional agents. Backfat thickness increases linearly with increasing body weight between 110 and 130 kg, whereas intramuscular fat content does not change significantly. With increasing live weight within this range, the ratios of belly and loin to carcass weight also are known to increase. Some physicochemical characteristics related to fresh and cooked meat quality including color, firmness, juiciness, etc. are known to be unaffected or slightly changed following an increase of slaughter weight. In conclusion, ratios of primal cuts and pork quality characteristics are not significantly affected by increasing the market weight. Moreover, increasing the market weight of lean-type pigs approximately up to 130 kg is normally profitable to producers, as long as packers and consumers accept larger pigs.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.4
• /
• pp.482-485
• /
• 2006

Korean native goats have lived on the Korean peninsula for more than 2,000 years and are regarded as a valuable genetic resource for the world. As an initial step to investigate the genetic structures of this breed, phylogenetic analysis and calculation of genetic diversities have been performed using mitochondrial DNA (mtDNA) sequence variations. A total of 19 Korean native goats were grouped into six haplotypes and the large majority of haplotypes were present in 13 animals. All mtDNA of these Korean goats belonged to the mitochondrial (mt) lineage A and revealed remarkably small genetic distances within the population when compared with other Asian goat populations, indicating less genetic variation in the Korean native goats. These results indicate high-inbred status of the Korean native goats and will influence breeding and conservation strategies adopted for this breed.

• Animal Bioscience
• /
• v.34 no.7
• /
• pp.1202-1209
• /
• 2021

Objective: The intestinal microbiota plays an important role in host physiology, metabolism, immunity, and behavior. And host genetics could influence the gut microbiota of hybrid animals. The three-way cross model is commonly utilized in commercial pig production; however, the use of this model to analyse the gut microbial composition is rarely reported. Methods: Two three-way hybrid pigs were selected, with Saba pigs as the starting maternal pig: Duroc× (Berkshire×Saba) (DBS) pig, Berkshire×(Duroc×Saba) (BDS) pig. One hundred pigs of each model were reared from 35 days (d) to 210 d. The body weight or feed consumption of all pigs were recorded and their feed/gain (F/G) ratio was calculated. On day 210, 10 pigs from each three-way cross were selected for slaughter, and cecal chyme samples were collected for 16S rRNA gene sequencing. Results: The final body weight (FBW) and average daily gain (ADG) of DBS pigs were significantly higher than those of BDS pigs (p<0.05), while the F/G ratios of DBS pigs were significantly lower than those of BDS pigs (p<0.05). The dominant phyla in DBS and BDS pigs were Bacteroidetes (55.23% vs 59%, respectively) and Firmicutes (36.65% vs 34.86%, respectively) (p>0.05). At the genus level, the abundance of Prevotella, Roseburia, and Anaerovibrio in DBS pigs was significantly lower than in BDS pigs (p<0.01). The abundance of Eubacterium, Clostridium XI, Bacteroides, Methanomassiliicoccus, and Parabacteroides in DBS pigs was significantly higher than in BDS pigs (p<0.05). The FBWs and ADGs were positively correlated with Bacteroides, ClostridiumXI, and Parabacteroides but negatively correlated with the Prevotella, Prevotella/Bacteroides (P/B) ratio, Roseburia, and Anaerovibrio. Conclusion: These results indicated that host genetics affect the cecal microbiota composition and the porcine gut microbiota is associated with growth performance, thereby suggesting that gut microbiota composition may be a useful biomarker in porcine genetics and breeding.

• Korean Journal of Animal Reproduction
• /
• v.27 no.4
• /
• pp.325-331
• /
• 2003

This study was performed to test the cellulose digestibility using the transgenic pigs harboring cellulose degradation gene D (CelD). After delivered offsprings between normal pig and transgenic swine, DNA was isolated from piglets tail for PCR analysis. In first generation, five out of 65 piglets showed CelD positive. Unfortunately, four CelD-positive pigs were died during growing, but one survived pig was used as a transgenic founder to produce F$_1$ descendents. Among 3 F$_1$ transgenic pigs produced, one died and the remaining two pigs were used to test the fiber digest efficiency. An assorted feed was composite of 5％ fiber with other ingredients. The feed of 3 kg per day was provided to the pigs including transgenic founders and littermate controls. The manure quantity was measured daily for a month, and all manures were dried for three days to analysis nitrogen, phosphate and fiber concentrations. The fiber digestion efficiencies of the transgenic F$_1$ pigs showed approximately 10％ higher than those of control pigs. Fiber digestion was not greatly improved in transgenic pigs as it had been expected approximately 30％. Nitrogen concentration of transgenic pig's manure was slowly decreased compare to the control pigs. Because there were only two transgenic pigs tested, a large number of transgenic pigs may be necessary to obtain more reliable data. Breeding of animals to obtain sufficient transgenic pigs subjected for a further study is on progress. Taken together, this study demonstrated successful production of transgenic pigs with increase of cellulose digestibility in the porcine feed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.7
• /
• pp.961-966
• /
• 2008

Direct and maternal genetic parameters for production traits in 1,642 pigs and maternal genetic correlations among production (1,642 pigs) and feed efficiency (380 boars) traits were estimated in 7 generations of a Duroc population. Traits studied were daily gain (DG), intramuscular fat (IMF), loineye area (LEA), backfat thickness (BF), daily feed intake (FI), feed conversion ratio (FCR) and residual feed intake (RFI). The RFI was calculated as the difference between actual and predicted feed intake. The predicted feed intake was estimated by adjusting the initial test weight, DG and BF. Data for production traits were analyzed using four alternative animal models (including direct, direct+maternal permanent environmental, or direct+maternal genetic+maternal permanent environmental effects). Direct heritability estimates from the model including direct and all maternal effects were $0.41{\pm}0.04$ for DG, $0.27{\pm}0.04$ for IMF, $0.52{\pm}0.06$ for LEA and $0.64{\pm}0.04$ for BF. Estimated maternal heritabilities ranged from $0.04{\pm}0.04$ to $0.15{\pm}0.05$ for production traits. Antagonistic relationships were observed between direct and maternal genetic effects ($r_{am}$) for LEA (-0.21). Maternal genetic correlations of feed efficiency traits with FI ($r_g$ of FI with FCR and RFI were $0.73{\pm}0.06$ and $0.90{\pm}0.05$, respectively) and LEA (rg of LEA with FCR and RFI were $-0.48{\pm}0.05$ to $-0.61{\pm}0.05$, respectively) were favorable. The estimated moderate genetic correlations between direct and maternal genetic effects for IMF and LEA indicated that maternal effects has an important role in these traits, and should be accounted for in the genetic evaluation system.

• Journal of Life Science
• /
• v.20 no.5
• /
• pp.717-722
• /
• 2010

The safety of animal feed was evaluated by analyzing the levels of heavy metals (Pb, Cr, Cd, As, Se and Ag) in cattle, swine, and poultry feeds and the levels of Cu, Zn and P in swine feed. Feeds used in the analysis were produced in Korea from 2004 through the first half of 2007. The results of the study revealed that, with the exception of Cd, the concentration of heavy metals were much lower than the Minimum Regulation Levels (MRLs). However, the Cd concentration exceeded the MRL in 1 of 987 swine feed samples in 2005, as well as in 4 of 1,239 swine feed samples and 1 of 778 poultry feed samples in 2006. The levels of Cu, Zn and P in swine feed were compared with the swine breeding standard. The results of this analysis revealed that the Cu concentrations in the samples exceeded the MRL for growing pigs by 0.97%, and that for finishing and breeding pigs by 9.9%. In addition, the Cu levels (80.98 ppm for piglet, 44.82 ppm for growing pigs, 19 ppm for finishing and breeding pigs) in swine feed showed higher levels compared to 3.5-6.0 ppm, which is the Cu requirement for swine. Furthermore, the results of the Zn analysis revealed that the samples exceeded the MRL for piglets, growing pigs, and finishing and breeding pigs by 5.7%, 7.7%, and 9.3%, respectively. Finally, the average concentration of P in swine feed was 0.74%, which is almost the same as the phosphate requirement for swine.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.1
• /
• pp.7-12
• /
• 2010

The full-length cDNA of the porcine peroxisomal ${\Delta}^3$,${\Delta}^2$-enoyl-CoA isomerase (PECI) gene encodes a monofunctional peroxisomal ${\Delta}^3$,${\Delta}^2$-enoyl-CoA isomerase. Cloning and sequencing of the porcine PECI cDNA revealed the presence of an 1185-base pair open reading frame predicted to encode a 394-amino acid protein by the 5'rapid amplification of cDNA ends (5'RACE) and EST sequences. The porcine PECI gene was expressed in seven tissues (heart, liver, spleen, lung, kidney, skeletal muscle, fat) which was revealed by reverse transcriptase-polymerase chain reaction (RT-PCR). The porcine PECI was mapped to SSC71/2 p11-13 using the somatic cell hybrid panel (SCHP) and the radiation hybrid panel (RH) (LOD score 12.84). The data showed that PECI was closely linked to marker S0383. A C/T single nucleotide polymorphism in PECI exon 10 (3'UTR) was detected as a PvuII PCR-RFLP. Association analysis in our experimental pig population showed that different genotypes of PECI gene were significantly associated with the Average Backfat thickness (ABF) (p<0.05) and Buttock backfat thickness (p<0.01).

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.10
• /
• pp.1473-1477
• /
• 2007

Four-and-a-half LIM-only protein 3 (FHL3) is a member of the LIM protein superfamily and can participate in mediating protein-protein interaction by binding one another through their LIM domains. In this study, the 5'- and 3'- cDNA ends were characterized by RACE (Rapid Amplification of the cDNA Ends) methodology in combination with in silico cloning based on the partial cDNA sequence obtained. Bioinformatics analysis showed FHL3 protein contained four LIM domains and four LIM zinc-binding domains. In silico mapping assigned this gene to the gene cluster MTF1-INPP5B-SF3A3-FHL3-CGI-94 on pig chromosome 6 where several QTL affecting intramuscular fat and eye muscle area had previously been identified. Transcription of the FHL3 gene was detected in spleen, liver, kidney, small intestine, skeletal muscle, fat and stomach, with the greatest expression in skeletal muscle. The A/G polymorphism in exon II was significantly associated with birth weight, average daily gain before weaning, drip loss rate, water holding capacity and intramuscular fat in a Landrace-derived pig population. Together, the present study provided the useful information for further studies to determine the roles of FHL3 gene in the regulation of skeletal muscle cell growth and differentiation in pigs.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.5
• /
• pp.712-721
• /
• 2020

Objective: The Wannan Black pig is a typical Chinese indigenous, disease-resistant pig breed with high fertility, and a crude-feed tolerance that has been bred by artificial selection in the south of Anhui province for a long time. However, genome variation, genetic relationships with other pig breeds, and domestication, remain poorly understood. Here, we focus on elucidating the genetic characteristics of the Wannan Black pig and identifying selection signatures during domestication and breeding. Methods: We identified the whole-genome variation in the Wannan Black pig and performed population admixture analyses to determine genetic relationships with other domesticated pig breeds and wild boars. Then, we identified the selection signatures between the Wannan Black pig and Asian wild boars in 100-kb windows sliding in 10 kb steps by using two approaches: the fixation index (F_ST) and π ratios. Results: Resequencing the Wannan Black pig genome yielded 501.52 G of raw data. After calling single-nucleotide variants (SNVs) and insertions/deletions (InDels), we identified 21,316,754 SNVs and 5,067,206 InDels (2,898,582 inserts and 2,168,624 deletions). Additionally, we found genes associated with growth, immunity, and digestive functions. Conclusion: Our findings help in explaining the unique genetic and phenotypic characteristics of Wannan Black pigs, which in turn can be informative for future breeding programs of Wannan Black pigs.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.11
• /
• pp.1657-1663
• /
• 2019

Objective: A genome-based best linear unbiased prediction (GBLUP) method was applied to evaluate accuracies of genomic estimated breeding value (GEBV) of carcass and reproductive traits in Berkshire, Duroc and Yorkshire populations in Korean swine breeding farms. Methods: The data comprised a total of 1,870, 696, and 1,723 genotyped pigs belonging to Berkshire, Duroc and Yorkshire breeds, respectively. Reference populations for carcass traits consisted of 888 Berkshire, 466 Duroc, and 1,208 Yorkshire pigs, and those for reproductive traits comprised 210, 154, and 890 dams for the respective breeds. The carcass traits analyzed were backfat thickness (BFT) and carcass weight (CWT), and the reproductive traits were total number born (TNB) and number born alive (NBA). For each trait, GEBV accuracies were evaluated with a GEBV BLUP model and realized GEBVs. Results: The accuracies under the GBLUP model for BFT and CWT ranged from 0.33-0.72 and 0.33-0.63, respectively. For NBA and TNB, the model accuracies ranged 0.32 to 0.54 and 0.39 to 0.56, respectively. The realized accuracy estimates for BFT and CWT ranged 0.30 to 0.46 and 0.09 to 0.27, respectively, and 0.50 to 0.70 and 0.70 to 0.87 for NBA and TNB, respectively. For the carcass traits, the GEBV accuracies under the GBLUP model were higher than the realized GEBV accuracies across the breed populations, while for reproductive traits the realized accuracies were higher than the model based GEBV accuracies. Conclusion: The genomic prediction accuracy increased with reference population size and heritability of the trait. The GEBV accuracies were also influenced by GEBV estimation method, such that careful selection of animals based on the estimated GEBVs is needed. GEBV accuracy will increase with a larger sized reference population, which would be more beneficial for traits with low heritability such as reproductive traits.