• Title/Summary/Keyword: Breaking Time

Search Result 480, Processing Time 0.034 seconds

Effects of Quasi-Carbonization Process on the Mechanical Properties of Spun Yarn Type Quasi-Carbon Fabrics

  • Donghwan Cho;Lee, Jongmoon;Park, Jon-Kyoo
    • Macromolecular Research
    • /
    • v.10 no.6
    • /
    • pp.318-324
    • /
    • 2002
  • In this paper we have extensively studied what and how processing parameters for quasi-carbonization influence the breaking strength and modulus of resulting quasi-carbon fabrics that are prepared from stabilized PAN fabrics with a spun yarn texture. Seven processing parameters have been considered as follows: applied tension, final heat-treatment temperature, heating rate, heating step, holding time, cooling rate, and purging gas purity. The results indicate that optimal uses of applied tension, final heat-treatment temperature, heating rate, and heating step during quasi-carbonization process are primarily important to increase the tensile properties of quasi-carbon fabrics and holding time, cooling rate, and purging gas purity are less importantly contributed.

Analysis of work times and postures occurring relating to stone channel work in forest engineering (돌수로공의 작업시간 및 작업자세 분석에 관한 연구)

  • Yeom, In-Hwan;Choi, Yeon-Ho;Kim, Myeong-Jun;Kweon, Hyeong-Keun;Lee, Joon-Woo;Kim, Je-Su;Park, Bum-Jin
    • Korean Journal of Agricultural Science
    • /
    • v.38 no.1
    • /
    • pp.101-108
    • /
    • 2011
  • In forest work, working conditions are very hard to improve. The proper distribution of work time and good posture is believed to bring about direct improvements such as accident prevention. On this, this study has analyzed forest workers' posture and their working hours in order to improve their working conditions in stone channel work. Authors has chosen several core elements of stone channel work to focus on, which include stone masonry, excavation of bed, moving stone, directing work, choosing stone, and breaking stone. The ratio of real working time over total working time was shown as 84.6%. As for the time ratio of each elemental work over the real working time, the stone masonry was 60.4%, the directing work was 15.1%, moving stone was 12.1%, choosing stone was 7.1%, breaking stone was 3.3%, and excavation of bed was 2.0%. According to the analytical results provided by OWAS, the ratio of category III (Work posture has a distinctly harmful effect on the musculoskeletal system) has shown that moving stone turned out 65.2%, choosing stone was 61.5%, stone masonry was 46.1%, breaking stone was 14.3%, excavation of bed was 12.5% and directing work was 6.8%. Furthermore, the ratio of category IV (Work posture with an extremely harmful effect on the musculoskeletal system) has shown that excavation of bed turned out 37.5%, breaking stone was 28.6%, stone masonry was 27.3%, choosing stone was 7.7%, moving stone was 6.1% and directing working was 4.5%. These results are expected to be utilized for the improvement with respect to both working methods in the stone channel work and the workers' working posture.

Lodging Related Traits and Yield of Rice as Affected by Time of Paclobutrazol Application (Paclobutrazol 처리시기가 벼의 도복형질과 수량에 미치는 영향)

  • 이석순;김태주
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.33 no.4
    • /
    • pp.336-342
    • /
    • 1988
  • An experiment was carried out to know the effects of paclobutrazol application time on the lodging related traits and yield of a rice variety. Seomjinbyeo, at two nitrogen leveles. Paclobutrazol (3kg 10a of 0.6% G) was applied 43, 33, 23, and 13 days before heading (DBH) and lodging related traits were observed 10, 20, 30, and 40 days after heading (DAH). Earlier applications of paclobutrazol reduced the length of lower internodes and later applications reduced the upper internodes. Culm length tended to decrease as time of paclobutrazol application delayed. Although lodging was not occurred in all plots. lodging index of paclobutrazol treated plots was lower than that of control and increased with maturity, Fresh weight of shoot increased up to 30 DAH and then decreased. Both fresh weight and breaking strength did not show consistent tendency with time of paclobutrazol application and observation. Direct effect of shoot fresh weight contributing to lodging index decreased with maturity. but that of breaking strength and culm length was similar during the ripening stages. Direct effect contributing to lodging index was greater in the order of breaking strength culm length. and fresh weight 40 DAH. Starch content of culm base decreased up to 20 DAH and then increased up to 40 DAH. Cellulose content increased up to 20 DAH, but hemicellulose and lignin did not change significantly during the ripening stages. Starch, cellulose, hemicellulose, and lignin contents of culm base did not correlated with breaking strength and time of paclobutrazol application did not show consistent results. Paclobutrazol applied 13 DBH did not reduce yield of rice. but the earlier applications reduced yield due to a reduced number of spikelets per panicle.

  • PDF

Influence of Accumulated Hours of Low Temperature in Dormant and Changing Temperature after Bud Breaking on Flowering of Main Apple Cultivars in Korea (휴면기 저온 누적 시간 및 발아 후 변온이 국내 주요 사과품종의 개화에 미치는 영향)

  • Kweon, Hun-Joong;Park, Moo-Yong;Song, Yang-Yik;Sagong, Dong-Hoon
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.19 no.4
    • /
    • pp.252-269
    • /
    • 2017
  • This study was carried out to examine the base temperature to flowering and the average days to flowering by accumulated hours of low temperature ($5.0^{\circ}C$) or changing temperature after bud breaking. Over-all, the prediction of flowering time in the commercial apple cultivars ('Fuji' and 'Tsugaru') and apple cultivars ('Chukwang', 'Gamhong', 'Hongan', 'Honggeum', 'Hongro', 'Hongso', 'Hwahong', 'Summer dream', 'Sunhong') bred in Korea at the Gunwi region for 4 years (from 2009 to 2012) was investigated. Also, this study estimated the flowering time when the air temperature of Gunwi region rises at $5.0^{\circ}C$ was investigated using the same data. The range of accumulated hours of low temperature (chilling requirement) was from 0 hour to 1,671 hours, and the range of high temperature (heat requirements) to flowering after low temperature treatment was from $5.0^{\circ}C$ to $29.0^{\circ}C$. The treatments of changing temperature after bud breaking were classified as constant temperature treatment (control) and $5.0{\sim}10.0^{\circ}C$ elevation or descent treatments. The results show that the average days to flowering was longer with shorter accumulated hours of low temperature, and the average days from bud breaking to flowering of 0 hour treatment was longer about 2~4 weeks than that of 1,335~1,503 hours treatments. In comparing to apple cultivars, the all cultivars were not flowered under $10.0^{\circ}C$ after bud breaking, and the cultivars with low chilling requirements needed low heat requirements for flowering. The average days to flowering of treatments that the air temperature after bud breaking was controlled about $15.0^{\circ}C$ was shorter about 1~3 weeks than that of treatments was controlled about $10.0^{\circ}C$. In the treatment of changing temperature after bud breaking, the average days from bud breaking to flowering of temperature elevation treatment was shorter than that of constant temperature treatment. By use of these results, the base temperature to flowering of main apple cultivars in Korea was seemed to $10.0^{\circ}C$, and if the air temperature of Gunwi region rises about $5.0^{\circ}C$ than that of current, the flowering time was estimated to be delayed by 1 week.

Effect of Cold Brine Immersion Time on Sliced Raw Fish Texture (생선회의 육질향상에 미치는 저온 브라인 침지시간의 영향)

  • SHIM, Kil-Bo;LEE, Gi-Bong;KIM, Tae-Jin;LEE, Keun-Woo;KIM, Geon-Bae;LEE, In-Soo;CHO, Young-Je
    • Journal of Fisheries and Marine Sciences Education
    • /
    • v.15 no.1
    • /
    • pp.57-66
    • /
    • 2003
  • The purpose of the present study was to investigate physicochemical changes in olive flounder and korean rockfish muscle subjected to the cold brine, and to find the optimal immersion condition. Effects of various immersion conditions in a sliced raw fish quality were investigated in the rigor index, breaking strength, ATP related compounds, and lactate accumulation in the muscle. The onset of rigor-mortis was accelerated by the increase of immersion time. Also, the time reaching full rigor was shortened remarkably too. However, the rigor index of samples immersed in the cold brine decreased more than that of samples killed instantly. Rigor index was the highest in samples killed instantly, followed by 2.5 min, 5min, 7.5 min, 10 min and 15 min in order. Breaking strength of all samples immersed in the cold brine decreased significantly after reaching the maximum values. The content of ATP related compounds in olive flounder, korean rockfish were $12.0{\mu}mole/g$ and $8.3{\mu}mole/g$, respectively. However, ATP decreased in the samples immersed in the cold brine. The content of ATP was lower, at the optimal condition and then it was increased. Also, lactates increased, at the optimal condition and then it decreased, in contrast with the ATP. The results suggested that the optimal immersion condition of olive flounder and korean rockfish was at -${12.5}^{\circ}C$ for 5min.

Optimum Latch Contour Design for Improving Gas Circuit Breaker Performance (가스회로차단기의 성능 개선을 위한 윤곽 최적설계)

  • Choi, Gyu Seok;Cha, Hyun Kyung;Sohn, Jeong Hyun;Yoo, Wan Suk
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.38 no.1
    • /
    • pp.25-30
    • /
    • 2014
  • The dynamic characteristics of a gas circuit breaker depend on the underlying high-speed operating mechanism with a spring-actuated latch system. Many studies have been carried out to reduce the breaking time of circuit breakers. In this study, the optimum latch contour design is determined for reducing the breaking time of a circuit breaker. A multi-body dynamic model of the latch is established for analyzing the dynamic behaviors of the circuit breaker by using the MSC/ADAMS program. Simulation results are matched against experimental data. VisualDoc is employed for determining the optimal latch contour. From the optimum design, the breaking time of a gas circuit breaker is improved by about 8.6%.

Effects of Electrical Stimulation on Physicochemical and Rheological Properties of Plaice, Paralichthys olivaceus Muscle at Early Period after Death (전기자극이 넙치육의 사후조기의 물리화학적 및 물성적 변화에 미치는 영향)

  • LEE Nam-Geoul;YANG Mu-Hae;CHO Young-Je
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.28 no.1
    • /
    • pp.23-30
    • /
    • 1995
  • This study was undertaken to clarify the effects of electrical stimulation on physicochemical and rheological properties of the plaice (Paralichthys olivaceus) muscle at early period after death. The plaices were electrically stimulated in seawater bath (110V/60Hz) for 15sec., 35sec., and 60sec. and killed instantly with spiking at the head. Killed samples were stored at $5^{\circ}C$, and the changes in rigor index, ATP breakdown, lactate accumulation, and breaking strength of muscle through storage were investigated. Electrical stimulation effectively accelerated rigor-mortis, lactate accumulation , and ATP breakdown. As the time of electrical stimulation was lengthened, the onset of rigor-mortis of all samples were accelerated Just after killing, and the amount of lactate was rapidly increased, But, significant differences were not observed in variance of rigor-mortis and lactate concentration. Electrically stimulated plaices showed decreasing in ATP to $4.58{\mu}mole/g$ for 15sec., $4.13{\mu}mole/g$ for 35sec., and $2.39{\mu}mole/g$ for 60sec. samples as compared with $5.5{\mu}mole/g$ of unstimulated samples. As the time of electrical stimulation was lengthened, ATP in samples were decomposed more rapidly. The rate constant of ATP breakdown were $0.244hr^{-1}$ for 15sec., $0.358hr^{-1}$ for 35sec., and $0.479hr^{-1}$ for 60sec.. The level of breaking strength in muscle of the plaice was $1050.30\pm50.23g$ immediately after killing. Values of breaking strength in samples electrically stimulated for 35sec. increased rapidly just after killing among all samples. However, the breaking strength was not increased through the whole storage time in samples stimulated for 60sec.. The value and time roaching to the maximum breaking strength for each samples stimulated electrically for 15, 35 and 60 second were $1264.43\pm35.76g$ and 2hr, $1357.68\pm22.50g$ and Ohr, and $1012.18\pm57.36g$ and Ohr. Breaking strength in all samples electrically stimulated decreased significantly (P<0.05) after reaching the maximum values.

  • PDF

Gelation of Rapeseed Protein Induced with Microbial Transglutaminase (미생물성 Transglutaminase에 의한 유채단백질의 겔화)

  • Hyun, Eun-Hee;Kang, Yeung-Joo
    • Korean Journal of Food Science and Technology
    • /
    • v.31 no.5
    • /
    • pp.1262-1267
    • /
    • 1999
  • Optimum reaction conditions for gel formation of rapeseed, Brassica napus, protein catalyzed by microbial TGase(transglutaminase) were evaluated by measuring breaking strength and deformation of gel. The polymerization of the protein gel was ascertained by SDS-PAGE and content of GL crosslinking$[{\varepsilon}-({\gamma}-glutamyl)lysine]$. In the reaction between rapeseed protein and TGase at $45^{\circ}C$ for 60 min, the breaking strength and deformation of the gel was the maximum at the ratio of 1 : 40 of enzyme to substrate. 10%(w/v) of rapeseed protein concentrate was optimum for gel production. The maximum breaking strength and deformation was shown at $45^{\circ}C$ The breaking strength increased linearly up to 90 min of the reaction time and remained unchanged. The breaking strength and deformation by TGase treatment was pH dependent and pH 7 was optimum for 10% rapeseed protein solution. SDS-PAGE analysis indicated that new band of highmolecular polymers were formed by the enzyme reaction, with disappearing the original bands of rapeseed protein. According to HPLC analysis. the content of GL crosslinking was increased from 0 to $7.14\;{\mu}mol/g$ gel for 90 min of the reaction time.

  • PDF

The Study on a sensitive current limiting breaking device using RF Sputtering (RF Sputtering을 이용한 전류 민감성 차단 디바이스에 관한 연구)

  • Lee, S.H.;Jeong, K.H.;Park, D.K.;Kim, Y.L.;Lee, J.C.;Koo, K.W.;Han, S.O.
    • Proceedings of the KIEE Conference
    • /
    • 1995.07c
    • /
    • pp.1088-1092
    • /
    • 1995
  • In this paper, we evaluated the sputter-deposited Cr/Cu thin film fuses on $Al_2O_3$ substrates by the adhesive, breaking and repetitive over-current test as a function of temperature on them. Each Cr and Cu was deposited $1700{\pm}300{\AA},\;3700{\pm}300{\AA}$ using RF sputtering unit. The electroplated Cu of $25{\mu}m$ thickness was added in order to make sensitive thin film fuse of the normal current 15[A]. The adhesive strength and the number of repetition were Increasing and then decreasing with the temperature. The maximum adhesive strength of over $9kgf/9mm^2$ was obtained at $400^{\circ}C$. In the breaking test, the post-arc time characteristic was better than any other factor.

  • PDF

A Study on the effect of Driving Speed and Breaking Power on Squeal Noise of Disk Break (주행속도와 제동력의 변화에 의한 디스크 브레이크의 스퀄 소음에 미치는 영향)

  • Kim J.H.;Kim K.H.;Choi M.J.
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2006.05a
    • /
    • pp.269-270
    • /
    • 2006
  • Brake noise is classified according to frequency territory: judder, groan and squeal. Squeal noise of disk brake is a noise and self excited vibration with frequency of $1{\sim}10Khz$ caused by the friction force between the disk and the pad of the automobile. Passengers in a vehicle feel uncomfortable. It causes unstable characteristic to the brake system when you try to stop the vehicle. Thus this study aims to find in which conditions the vehicles are stable during the braking hour and find ways to decrease a squeal noise and the vibration by measuring various factors including squeal noise and self excited vibration between the pad and disk brake system during the braking hour. From the result the countermeasure for a squeal noise and a vibration decrease is established. Also the analyzed data is found to be useful and can be applied to the actual brake model.

  • PDF