• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.1
• /
• pp.14-21
• /
• 2000

This paper presents the results of performance evaluation of silicone treatment technique which was developed for the insulation rehabilitation of water tree aged XLPE power cables. We treated the water tree aged 325 [$\textrm{mm}^2$] CN/CV cables with silicone, and then analyzed the degree of insulation rehabilitation as a function of time. AC breakdown test was conducted to evaluate insulation rehabilitation. The diagnosis test using relaxation current measurement and the characteristic analysis of insulation were also performed to estimate silicone treated cable. AC breakdown strength of silicone treated cable for one year was increased, resulting from the chemical reaction between silicone fluid and water. This experiment showed that the silicone treatment technique was effective for insulation rehabilitation of the water tree aged cables.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.7
• /
• pp.2298-2314
• /
• 1996

Electric field effect on boiling of refrigerants R11, R113, and FC72 has been investigated experimentally. One purpose of the experimental investigation is to determine the effects of the electrode arrangements on electrohydrodynamic boiling of the above mentioned liquids. The test equipment employed in the experiment consists of a shell and tube heat exchanger with six or six and twelve rows of electrode wires around the tube. It has been found that the applied voltage promotes the boiling heat transfer coefficient except FC72. Boiling heat transfer enhancement obtained is about 230% for R11, 280% for R113. It has also been observed that bubbles detached from the tube aggregate at the place where the electrical gradient force balances with the buoyancy one. These aggregated bubbles force to decrease the boiling heat transfer coefficient as well as to reduce the voltage needed to the dielectric breakdown.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.3
• /
• pp.493-499
• /
• 2004

The dominant effect of the interaction between vortices, generated by the addition of the Leading Edge Extension(LEX) in front of the wing, was well observed in this experiment. In this study, systematic approach by PIV experimental method within a circulating water channel was adopted to study the fundamental characteristics of induced vertex generation, development and its breakdown appearing on a delta wing model with or without LEX in terms of four angles of attack($15^{\circ}$, $20^{\circ}$, $25^{\circ}$, $30^{\circ}$) and six measuring sections(30%, 40%, 50%, 60%, 70%, 80%) of chord length. Distributions of time-averaged velocity vectors and vortices over the delta wing model were compared along the chord length direction. High-speed CCD camera which made it possible to acquire serial images is able to get the detailed information about the flow characteristics occurred on the delta wing. Especially quantitative comparison of the maximum vorticity featuring the induced pressure distribution were also conducted to clarity the significance of the LEX existence.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.3
• /
• pp.690-698
• /
• 2016

In this paper, a study is carried out to investigate the dielectric, physical and chemical properties of Palm Oil (PO) and Coconut Oil (CO) under open thermal ageing condition. The type of PO used in this study is Refined Bleached and Deodorized Palm Oil (RBDPO) Olein. The ageing experiment was carried out at 85 ℃ and 115 ℃ for 1, 3, 5, 7 and 14 days. Several parameters were measured such as AC breakdown voltage, dielectric dissipation factor, relative permittivity, resistivity, viscosity, moisture and acidity throughout the ageing duration. Based on the study, it is found that there are no significant changes on the AC breakdown voltages and relative permittivities for both RBDPO and CO. At ageing temperature of 115℃, there are clear reduction trends of dielectric dissipation factor for CO and resistivities for most of RBDPO. On the other hand, no clear trends are observed for viscosities, moisture and acidities of RBDPO and CO throughout the ageing duration.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.3
• /
• pp.524-529
• /
• 2013

Recently, researchers have become interested in natural ester fluids, as they are an environmentally friendly alternative to mineral oils. Natural ester fluids are a natural resource made from plants; they have higher biodegradability, flash, and fire points, and a greater permittivity compared to conventional mineral oils. However, natural ester fluids also have a higher pour point, viscosity, and water content. These characteristics can hamper circulation and impair the electrical properties of an oil-filled transformer. A large amount of data has been accumulated over the years in regards to mineral insulating oil involving dielectric breakdown voltage and lightning impulse tests. However, natural ester fluids have not had their electrical properties sufficiently characterized. In this paper, we present an investigation into the characteristics of the electrical discharge development in natural ester fluids and in an oil-filled transformer near the pour points. The experiment results show that the electrical properties decreased according to a decrease in the ambient temperature and freezing time. It was found that the pour point and water content of natural ester fluids have a significant effect on the electrical properties.

• Journal of the Korean Society of Tobacco Science
• /
• v.11 no.1
• /
• pp.3-9
• /
• 1989

Field experiment was conducted to find out the cause of calcium deficiency of burley tobacco (Nicotiana tabacum L.), Liming materials and application rate were CaSO4 : Ca 35kg/10a, CaCO3 : 35kg/10a and agricultural lime : Ca 142kg/10a. The breakdown in tissues at tips and margins of upper leaves was developed at maximum growth stage. If complete breakdown and death does not occur and growth takes place later, giving the leaf a scalloped appearance. Upper leaves contained lower calcium content than other leaves. The stem and midvein of calcium deficient plants contained lower calcium and calcium minus oxalic acid, but higher oxalic acid contents than those of normal plant. Fresh leaves of limed plot contained higher calcium and oxalic acid, but not significant increment of calcium minus oxalic acid than those of unlimed plot. Since calcium oxalate is insoluble, it could precipitate within the culls if the calcium and oxalic acid are accessible to each other. It suggest that high level of oxalic acid in stem and midvein could be interfering with translocation of calcium to upper leaves.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.08a
• /
• pp.126-129
• /
• 2003

The electrical properties of a ZnO-based multilayered chip varistor (abbreviated as MLV) were studied as functions of firing condition and the degree of lamination. The fundamental varistor characteristics such as nonlinear coefficient and breakdown voltage were independent of the degree of lamination. As the number of the laminated ceramic sheets increased, however, not only the energy handling capability but also the capacitance and the leakage current which are relevant to delayed response to the voltage surge and the pre-breakdown energy loss, respectively, increased. With the increase of firing temperature between $950^{\circ}C$ and $1150^{\circ}C$, both the capacitance and the leakage current of the MLV increased due mainly to the grain growth of ZnO and the volatilization of $BiO_2O_3$. High performance MLVs with clear electrode pattern were obtained at the firing temperature range of $l000{\sim}1050^{\circ}C$ in this experiment.

• Korean Journal of Agricultural Science
• /
• v.40 no.3
• /
• pp.191-196
• /
• 2013

This study was conducted to investigate the effect of temperature during transportation and continuing shelf-life on fruit quality and the occurrence of physiological disorder to set up the appropriate exportation temperature condition in Asian pear (Pyrus pyrifolia Nakai) 'Hanareum'. In the experiment of simulated exportation headed for USA, the fruits transported at $1^{\circ}C$ showed less weight loss than those of $5^{\circ}C$. Market temperature appeared as a key factor for keeping freshness of exported pear fruits rather than transportation temperature. Quality factors such as high flesh firmness and low incidence of fruit rot and physiological disorders including core breakdown and pithiness were attained at the fruits maintained at $18^{\circ}C$. Approximately two times higher incidence of physiological disorders and of fruit decay rates were observed in the fruits distributed at $25^{\circ}C$ than the those of $18^{\circ}C$. Therefore, temperature management during marketing resulted as an important factor for maintaining fruits quality in the process of pear fruit exportation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.10
• /
• pp.111-117
• /
• 2008

Generally, speed control for Induction motor widely used in industrial field is accomplished by commercial inverter. Induction motor driven by commercial inverter causes the micro surge voltage because of high speed switching of inverter. Micro surge brings about not only the breakdown of motor but also noise in PLC control system. And they court the enormous interference in activity for production. In this paper, we suggest the suppressible countermeasure for the breakdown of motor after the consideration of productive mechanism about micro surge. Experiment is performed by inverter with LCR filler in its output terminal. As a result, we confirmed that micro surge voltage is reduced. And the suppressible countermeasure for the noise of PLC control system is suggested by theoretical consideration.

• Journal of Surface Science and Engineering
• /
• v.46 no.6
• /
• pp.271-276
• /
• 2013

The demand for stainless steel is continuously increasing with the development in offshore industry due to its excellent corrosion resistance characteristics. However, it suffers cavitation-erosion in application of high rotating fluid and the damage accelerates in combination with electrochemical corrosion because of Cl-ion in sea water. This paper investigated the complex damage behavior for 431 stainless steel, that is one of martensite stainless steels, through the hybrid test in sea water. Various experiments were carried out, including potential measurement, anodic/cathodic polarization experiment and Tafel analysis. Surface morphology was observed and damage depth was analyzed by SEM and 3D microscope after each experiment, respectively. The results revealed that more active potential was observed under cavitation condition than static condition due to breakdown of passive film and activation of charge transfer, and that higher corrosion current density was obtained under cavitation condition due to synergistic effect of corrosion and erosion.