• Fire Science and Engineering
• /
• v.2 no.2
• /
• pp.3-8
• /
• 1988

Due to its commercial, ceremonial function, the hotel design has a tendency to be higher and larger, and its form being varied. But this tendency is not desirable in respect of architectural fire-safety. The higher its height and the larger its mass becomes, relatively the damage expectation becomes. Moreover, in case of fire, it is expected that many serious problems break out, because the users of a hotel, unlike those of office building or housing, are majority of unspecified people and they have no information about that building. Therefore, this study dealt with fire-safety problem in hotel design and tried to find out countermeasures of fire-safety and successful escafe against fire.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.1
• /
• pp.79-87
• /
• 1999

The most part of the faculty drop a trouble and damage of machine equipment even if whatever cause they break out take place at local and trifling place and the factor dominating their trouble is due to wear debris occurred in the lubricated machine moving surface. This study has been car-ried out to identify morphology of wear debris on the lubricated machine moving system by means of computer image analysis. Namely the wear debris contained in lubricating oil extracted from movable machine equipment will be filtered through membrane filter(void diameter 0.45${\mu}m$) and will be analyzed with its data information such as 50% volume diameter aspect roundness and reflectivity. Morphological characteristic of wear debris is easily distinguished by four shape parameters it is necessary to divide small class of every 100 wear debris in total wear particles in order to distinguish morphological characteristic of wear debris more easily by computer image analysis. We are sure that operation condition diagnosis of the lubricated machine moving surfaces is possible by computer image analysis.

• Proceedings of the KWS Conference
• /
• 2005.06a
• /
• pp.19-21
• /
• 2005

The ball shea. tests for ball grid array (BGA) and flip chip packages were carried out with different displacement rates to find out the optimum condition of the displacement rate for this test. The BGA packages consisted of two different kinds of solder balls (eutectic Sn-37wt.%Pb and Sn-3.5wt.%Ag) and electroplated Au/Ni/Cu substrate, whereas the flip chip package consisted of electroplated Sn-37Pb solder and Cu UBM. The packages were reflowed up to 10 times, or aged at 443 K up to 21 days. The variation of the displacement rate resulted in the variations of the shear properties such as shear force, displacement rate at break, fracture mode and strain rate sensitivity. The increase in the displacement rate led to the increase of the shear force and brittleness of solder joints.

• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.556-563
• /
• 1998

Railway bridges have a significant effect on the stress and displacement of continuous welded rail(CWR). Longitudinal compression force at high temperature, combined breaking or acceleration forces can introduce track buckling. On the other hand, longitudinal tensile forces, associated with low temperatures, in combination with breaking forces may break rail. Therefore, it is very important to work out thorough counter measures for those problems, specially in high speed rail which high safety is required. The exact evaluation of longitudinal force of rail has the key to the solution. The main aim of the present paper is to examine whether the longitudinal force of CWR's on Kyung-Bu-HSR satisfy the criteria to be fulfilled in the design of railway bridge. The analyses are carried out by using "CWRAP" program which was developed by our research group. The ballast resistance and breaking force effects on the longitudinal force of CWR are investigated.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.142-143
• /
• 2015

In this study, the remodeling of the insulation for the study of economic evaluation to find out. Targeting first Hyomin Domitory in Dong-Eui University, the purpose of the study is to carry out insulation work to conform to the strengthening of legal insulation standards. Studies in the way of insulation construction surveys of students who after living through the Survey. Exterior walls and windows with a comparative analysis of the thermal transmittance insulation performance is calculated according to the annual heating costs. The study is about 108 years after the investment is recovered through the break-even point was to know. Resolve residents' complaints, the gap wind reduction, reduction of environmental pollution and other problems solved.

• 보존과학연구
• /
• s.28
• /
• pp.39-58
• /
• 2007

The Seated Buddha image carved on rock surface of Yuneulgok in Bae-ri, Gyeongju constituted of alkali feldspar granite. There is surface weathering by abrasion, exfoliation and break out. As a result various experiment was carried out testing rock material property to quantitatively grade weathering. Besides, this study is focused on properties of rock and correlation between things. Additionally, comparison of chemical properties to nondestructive weathering grade in the buddha image carved on rock. This result utilized on important resource for scientific conservation system compared with weathering appearance.

• Journal of the Korean Society of Safety
• /
• v.3 no.1
• /
• pp.31-36
• /
• 1988

We live in the building which made of concreat. If a fire break out in the building on a sudden, the heated concreat structual of the building were become very weak and bad poor. In this study, it was investigated by test for thermal expansibility and compressive strength of the highly heated concreat. The experiment was carried out in the temparature range of 150―75$0^{\circ}C$. The obtained results are as follow. 1. The heated concreat has weaken in compressive strength from about at 30$0^{\circ}C$. 2. The concreat heated over 45$0^{\circ}C$ is not proper for structual material. 3. The concreat expanded remarkable when it was heated about at 450―$600^{\circ}C$.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1199-1201
• /
• 2004

When The temperature of the joining of SCR rises major changes of characteristics are increase of leakage current, decrease of break-down voltage, and increase of turn off time. Because these changes promote the inferiority of SCR it(SCR) will get out of control and its life time will be shortened and finally it will be destroyed. In this paper, we will measure the changes of the characteristics in accordance with a rise in temperature. On the basis of the result we will find out the appropriate time to change SCR and we will use the result for the maintenance of SCR and increase of reliability of SCR.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.05a
• /
• pp.332-335
• /
• 2009

Incase of not considered seismic design at transformer vault which is made of many informant electrical facility, facility is damaged, electrical fire breaks out and second damage is able to break out at generating earthquake. But seismic design yet is not applied to at transformer vault in the country. Regard to seismic design method of electrical facility installed in the building internal, we present the seismic design of electrical facility using "Building construction design standard" in internal and "Manual of seismic design and construction for Building Electrical facility" in japan. This paper will be used detail seismic design of pipe and facility. reliability inspection plan for seismic design and construction of electrical facility

• The Journal of Korean Society for School & Community Health Education
• /
• v.4
• /
• pp.1-20
• /
• 2003

This study was not intended to analyze out the realities of the safety accidents in school. The purpose of this study was to find out the personality of elementary school students in 6th grade and analyze the relationship between the personality of elementary school students and the safety accidents in the school. We made a visit 12 elementary school personally in the B city of Gyeonggi Province and gave out 552 questionaries in order to accomplish the purpose of this study. And we analyzed the 501 answer data except the unfittable data 51 sheets-in case of no answer or untruthfulness. The inspection of the personality used the Eysenck Personality Questionnaire(EPQ) and the questionnaires of the safety accidents in the school were reorganized of the questionnaires which were used in Chun-Ok, Joen(1997) and One-Yong, Kim(1999)'s study to correspond with our purpose of study. Answer sheets were gone through the t and x2 test by using the program of SPPS. First, elementary school students are in the formative period in the life of a man. So many students's personality was in the middle group rather than in high and low group. In regard of the distintion between the boy students and the girl students, the boy students had higher score in Psychoticism(P) but the girl students had higher score in Neutroticism(N). And Lie(L) was showing a little more score in the girl students. Second, there was significant difference in the investigation of safety accidents in school according to sex distinction. 1) Comparing the boy students and the girl students, the rate of accidents was higher in boy rather than girl. And there was significant difference. 2) Comparing the grade of the school, the rate of accidents was higher in upper grade than lower grade both girls and boys. 3) In the kind of accidents, the traumatic Injuries were very popular and the next were contusions. There was significant difference in the traumatic injury and nosebleed. 4) The results of injured parts showed that the injuries of foot, leg, hand, arm hold a large majority. And there was a significant difference in head, face, foot, leg and etc. 5) Most accidents broke out during the break time and then accidents happened after school were the next. The flowings were lunch time and class time. There was a significant difference in accidents happened during the class, break time and lunch time. 6) Comparing the subjects, the most accidents broke out in the class of physics. 7) Among the cause of accidents, one's own carelessness was showing the highest rate. There was a significant distintion in the fight and game. 8) The safety accidents took place most in playground, and there was a significant difference. 9) Being slight wound was showing almost in the degrees of damage. And there was a significant difference. Third, the boy students were not showing the significant difference in relation to the personality, the frequency of accidents and the degrees of damage. But the girl students were showing the significant difference in relation to the Extraversion-Introversion(E) and the frequency of accidents. And there were a significant difference between E and N. Also they were showing the intense damages.