• Journal of Korean Institute of Industrial Engineers
• /
• v.28 no.3
• /
• pp.283-290
• /
• 2002

Two-level fractional factorial designs are widely used when many factors are considered. When two-level fractional factorial designs are used, some effects are confounded with each other. To break the confounding between effects, we can use fractional factorial designs, called fold-over designs, in which certain signs in the design generators are switched. In this paper, optimal fold-over designs with four-level quantitative and two-level factors are presented for (1) the initial designs without curvature effect and (2) those with curvature effect. Optimal fold-over design tables are provided for 8-run, 16-run, and 32-run experiments.

• 전기의세계
• /
• v.14 no.2
• /
• pp.8-13
• /
• 1965

It is expected that the impurities contained in a solid state insulation material will affect a considerable influence on its break-down voltage, dielectric loss, and insulation resistance. In this thesis, as a preliminary experimental research for the investigation described above, the effect of metalic barrier between the electrodes on the creepin flash over discharge voltage along the surface of a solid insulation material has been investigated, and got some interesting results. It was found that generaly the flash over voltage rises when a metalic barrier is located between the electrodes. The results of this investigation will be taken into account as an important components on the insulation design to prevent the creeping flash over discharge in insulators, bushings, and so on.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.274-277
• /
• 2004

The most important mode of subcritical crack growth is primary water stress corrosion crack, which was the reported mechanism from the root cause analysis of the crack in the bimetallic welds. Stress corrosion crack growth evaluations was carried out for several flaw shapes of both axial and circumferential flaws, using the steady-state stresses including residual stresses. This evaluation considered the possibility of additional flaws in the primary loops of nuclear power plant, even though no such flaws have been identified by Ultrasonic Test. Consequently, Results show that the predicted flaw sizes will determine acceptability for continued service and maintenance.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.6
• /
• pp.95-101
• /
• 2011

Micro-abrasive jet machining(${\mu}AJM$) using mask is a fine machining technology which can carve a figure on a material. The mask should have holes exactly same as the required figure. Abrasive particles are jetted into the holes of the mask and it collide with the material. The collision break off small portion of the material. And the ${\mu}AJM$ nozzle should move all over the machining area. However, in general the carving shape is modeled as in a bitmap figure, because it often contains characters. And the mask model is also often modeled from the bitmap image. Therefore, the machining path of the ${\mu}AJM$ also efficient if it can be generated from the bitmap image. This paper suggest an algorithm which can generate ${\mu}AJM$ tool path directly from the bitmap image of the carving figure. And shows some test results and applications.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.170-175
• /
• 2005

In this study, experimental and theoretical methods were applied to understand brake squeal noise VVVF rolling stock on tracks. Trailer cars needed to payed a particular attention, because they were the major source of brake noise. VVVF rolling stocks for lines no 1 of the subway system in Seoul were used for experimental analyses. In order to study brake squeal noise, a dynamometer test at the S&T Brake, Co., which was a manufacturer of brake pads had performed. For measuring vibration and noise, vibration tests of brake parts (brake lining, brake lining head, back plates, etc.) at the SNUT were executed. Also, vibration tests of disc assembly and lining block at the heavy maintenance shop of the Gunja depot were performed. The modal analyses by using an ANSYS which was one of the CAE commercial program were simulated to know the relationship to the mechanism of brake noise. On the based of the tests and the simulations it was found that specific frequencies of the brake parts affected squeal noise, and improvements for reducing squeal noise were proposed.

• International Journal of Internet, Broadcasting and Communication
• /
• v.10 no.3
• /
• pp.104-108
• /
• 2018

Lithium-ion batteries have been used in energy storage systems (ESS), electric vehicles (EVs), etc. due to their high safety, fast charging and long lifecycle. This paper aims to improve the convenience of users by changing the wired battery stack used in the battery pack, wirelessly using RFID, reducing the internal volume of the battery pack, reducing the size of the battery pack. In this paper, we propose a battery management system which can provide the flexibility of battery pack expansion and maintenance by using lithium ion battery, battery management system (BMS) and wireless communication for light weight of 1Kw small battery pack. Also, by flexibly arranging the cell layout inside the battery pack and designing to reduce the size of the outer shape of the battery pack.

• Journal of The Korean Astronomical Society
• /
• v.36 no.3
• /
• pp.145-148
• /
• 2003

P-Cygni type Ly$\alpha$ from starburst galaxies, either nearby galaxies or Lyman Break galaxies, are believed to be formed by galactic outflows such as galactic supershells or galactic superwinds. We develope a Monte Carlo code to calculate the Ly$\alpha$ line transfer in a galactic supershell which is expanding and formed of uniform and dusty neutral hydrogen gas. The escape of Ly$\alpha$ photons from the system is achieved by a number of back-scatterings. A series of emission peaks are formed by back-scatterings. When we observe P-Cygni type Ly$\alpha$ emissions of starforming galaxies, we can usually see merely singly-peaked emission. Hence the secondary and the tertiary emission humps should be destroyed. In order to do this, dust should be spatially more extended into the inner cavity than neutral supershell. We find that the kinematic information of the expanding supershell is conserved even in dusty media. We discuss the astrophysical applications of our results.

• Journal of Applied Reliability
• /
• v.9 no.3
• /
• pp.177-193
• /
• 2009

Hydraulic breakers, the attachment devices of the excavators, refer to a machine that converts back and forth motions of pistons into energies to break objects down finely. As the use of hydraulic breakers has been steadily increasing world-wide, consumers have become more interested in not just the quality of hydraulic breakers but their reliability. This study show functions and usages of several main parts on hydraulic breakers. In addition, based on the effect of action of hydraulic breakers, FMEA was performed to figure out the major causes and manifestations of malfunctioning. As above mentioned, we analyzed reliability of hydraulic breakers by models, and the data that had been used for the analyses were obtained from malfunctioning data in the field.

• 보존과학연구
• /
• s.28
• /
• pp.39-58
• /
• 2007

The Seated Buddha image carved on rock surface of Yuneulgok in Bae-ri, Gyeongju constituted of alkali feldspar granite. There is surface weathering by abrasion, exfoliation and break out. As a result various experiment was carried out testing rock material property to quantitatively grade weathering. Besides, this study is focused on properties of rock and correlation between things. Additionally, comparison of chemical properties to nondestructive weathering grade in the buddha image carved on rock. This result utilized on important resource for scientific conservation system compared with weathering appearance.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.649-652
• /
• 2006

The exist waterproofing membrane cause not to assure proper thickness in constructing. It become a serious problem which as decreasing of durability, waterproofing membrane to be tom and break down. Therefore, it is necessary that the expert have to construct waterproof works,, if not, it can be frost and thawing or chemical corrosion called one of the reason in maintaining the safety of concrete structure. In summarize, for this paper, it would be understand that exposed and compound experimental study of waterproofing sheet using coat material filling into the protuberance to improve the durability for concrete structure can widely apply to field to solve the these significant problem.