• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.3
• /
• pp.410-414
• /
• 2013

Styela (S.) clava (Korean name: miduduk) tunic is produced as a by-product after processing of S. clava. For utilizing this tunic, a konjac containing the tunic extracts was prepared and the qualities evaluated for their color, textural properties, and sensory attributes. The tunic extract was prepared by boiling tunic with water, followed by filtration through filter paper. Significant 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) radical scavenging activity was found in the tunic extract. Increasing the concentration of tunic extract in the konjac tended to decrease lightness (L) and increase the redness (a) and the yellowness (b) of the konjac. The strength and hardness of the konjac increased with increasing concentrations of the tunic extract. All test samples with a 3 mm thickness had good flexibility and did not break even after 4 times folds. In sensory evaluations, the konjac containing 25% S. clava tunic extracts acquired a relatively higher score. The results suggest that S. clava tunic can be applied to konjac products to improve their quality and functionality.

• Science of Emotion and Sensibility
• /
• v.19 no.3
• /
• pp.51-58
• /
• 2016

This study examined the difference between the deaf and hearing adolescents of experiencing emotions and the intensity levels of expressing them. Three different video clips were used to induce pleasure, anger, and sadness. While watching the clips, facial expressions of the participants were recorded. The experienced emotions were measured by a self-report method, and the third person rated participants' expressed emotions based upon the recorded facial images. Two groups (deaf and hearing) were compared if those two groups shared the same experienced emotions, and whether the ratings scored by the third person corresponded with the self-rated scores. There was no significant difference in experienced emotion and its intensity level. However, hearing adolescents showed more intensive responses of pleasure than they reported, while deaf adolescents showed less intensive expressions of happiness than they reported themselves. Thus, hearing people might not be able to detect and fully comprehend how the deaf feel in general circumstances. This further indicates that the deaf adolescents cannot get enough supports from the hearing people when they express their feelings, and consequently, have a possibility of causing misunderstandings, conflicts, or even a break in relationships.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1883-1886
• /
• 2005

In this paper, a decoupled dual servo (DDS) stage for ultra-precision scanning system with large working range is introduced. In general, dual servo systems consist of a fine stage for short range and a coarse stage for long range. The proposed DDS also consists of a $XY\theta$ fine stage for handling and carrying workpieces and one axis coarse stage. Its coarse stage consists of air bearing guide system and a coreless linear motor with force ripple. The fine has four voice coil motors(VCM) as its actuator. According to a VCM's nature, there are no mechanical connections between coils and magnetic circuits. Moreover, VCM doesn't have force ripples due to imperfections of commutation components of linear motor systems - currents and flux densities. However, due to the VCM's mechanical constraints the working range of the fine is about $25mm^2$. To break that hurdle, the coarse stage with linear motors is used to move the fine about 500mm. Because of the above reasons, the proposed DDS can achieve higher precision scanning than other stages with only one servo. With MATLAB's Sequential Quadratic Programming (SQP), the VCMs are optimally designed for the highest force under conditions and constraints such as thermal dissipations due to its coil, its size, and so on. And for their movements without any frictions, guide systems of the DDS are composed of air bearings. To get precisely their positions, a linear scale with 5nm resolution are used for the coarse stage's motion and three plane mirror laser interferometers with 5nm for the fine's $XY\theta$ motions. With them, on scanning the two stages have same trajectories. The control algorithm is named Parallel method. The embodied ultra-precision scanning system has sub 100nm following error and in-positioning stability.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.10
• /
• pp.1703-1708
• /
• 2004

This study was carried out to investigate the characteristic quality of jeungpyun added Paecilomyces japonica with different fermentation time. The volume of jeungpyun added Paecilomyces japonica was more increased after fermentation. The volume was decreased when the fermentation was progressed. The pH was 5.1 before fermentation and the pH decreased when the fermentation was progressed. Moisture content was more increased as the time of fermentation became longer. Hunter color test, L value and b value appeared the highest after 1st fermentation, and it appeared lesser when the time of fermentation became longer. In measurement of texture, hardness showed the highest value when 90 minutes passed after the 2nd fermentation. Gumminess and brittleness were tend to increase when it have longer fermentation time. In scanning electron microscopic observation, organization of sponges was tend to break down as the fermentation time was longer. Sensory properties showed that color intensity was more strong when second fermentation was progressed, and hardness, toughness, sourness were high when the fermentation time was longer. In conclusion overall acceptability of jeungpyun, 3$0^{\circ}C$, 3 hours after 1st fermentation and 2nd fermentation for 30 minutes, 35$^{\circ}C$ showed the most preference.

• Journal of Advanced Navigation Technology
• /
• v.20 no.4
• /
• pp.374-379
• /
• 2016

Recently, IoT(Internet of Things) to connect the objects and people has attracted attention. And it is rapidly developing. IoT is to develop, experts are predicting that the device is connected to the Internet to break through around 100 billion within 10 years. However, the current IoT companies are having a difficult state to the other each other IoT platform for interaction between data silos effects. These silos effects will limit the IoT grow to a larger market. Thus, the IoT service supplier shall develop an open platform for interaction IoT data between each IoT platform. These web technologies for current open IoT platform has emerged. If developers are using familiar, easy-to-learn Web technologies, developers can take advantage of a variety of services for the collected data, and found the IoT devices can be bypassed if there is a problem on the network. In this paper, we investigate the data communications technology that can be used in WoT environment to overcome these silos effects. As a result, the polling method that can simply send the IoT information the fastest.

• Korean Journal of Food Science and Technology
• /
• v.36 no.3
• /
• pp.432-439
• /
• 2004

Increase in water vapor barrier properties of sodium alginate films was studied by preparing composite films with fatty acids, i.e., lauric, palmitic, stearic, and oleic acids, and by treatment with 3% $CaCl_{2}$ solution for 3 min. Film thickness, surface color, microstructure, tensile strength (TS), elongation at break (E), water vapor permeability (WVP), water solubility (WS), and sorption isotherm of films were investigated. Microstructure of films observed with SEM was changed by fatty acid and $CaCl_{2}$ treatments. TS decreased 25-70% depending on fatty acid used, and increased 1.5- to 2-fold by $CaCl_{2}$ treatment. E decreased by both fatty acid and $CaCl_{2}$ treatments. Except oleic acid, WVP decreased significantly (p<0.05) by forming composite films with fatty acids, particularly with stearic acid, WVP decreased more than two-fold. WS also decreased by fatty acid and $CaCl_{2}$ treatments. In stearic acid, WS decreased about 30-fold by combined treatment of fatty acid and $CaCl_{2}$. Sorption isotherm showed typical biphasic pattern with deliquescent point of 0.75. Results of isotherms and BET monolayer moisture content indicated hydrophilicity of film decreased by $CaCl_{2}$ treatment.

• Journal of Energy Engineering
• /
• v.24 no.3
• /
• pp.96-108
• /
• 2015

A passive containment cooling system has been designed to remove the heat inside a containment during accidents without external power supply. In this work, the PCCS was introduced in the APR1400 plant to replace the containment spray system and, then, the thermal-hydraulic performance of the PCCS was analyzed using the system thermal-hydraulic computer code, MARS. A double-ended cold-leg break accident, which is known to induce the maximum pressure in the containment, is simulated, where the thermal hydraulics of the PCCS, the reactor coolant system, and the containment are simultaneously simulated. The results of the calculations showed that the PCCS can replace the existing spray system and that the containment building and its internal structure also play a very important role for the heat removal during the accident. Some sensitivity calculations were carried out to evaluate the model uncertainty and the effects of design parameters. The limitations of the PCCS are also discussed.

• Journal of Conservation Science
• /
• v.16 s.16
• /
• pp.77-88
• /
• 2004

This study evaluates the occurrences, phyfical weathering and biological deterioration on rock properties during the dissection process an object of stone pagoda in the Mireuksaji temple site. For restoration and conservation, all kinds of rock properties are carried out detailed scientific investigation and diagnosis. Constituting rocks of the pagoda composed mainly of equi-granular medium grained biotite that rock properties presumed to be use about 3,000 materials. Main external properties of the pagoda are total 446 materials, and the rock properties under the concentration load on the each floors occurred with overlapping fracture, weathering and deteriorations. The 84 materials show highly degraded about $18.8\%$ among the external properties. Representative physicochemical deteriorations are fracture, loss, break, exfoliation, degradation, grain shaped dissolution, relief surface, discoloration and hydroxide precipitates, in this study, the deterioration state of each properties give a precisely description and analysis. Coverage of lichen and algae on the rock surface represented about $85\%$. As the some properties, biological contaminants withered up when spray rock surface with diluted cleaning chemicals. Results of the study are utilized an application for restoration system and detailed investigation during the dissection process of stone cultural properties.

• Wind and Structures
• /
• v.11 no.4
• /
• pp.275-289
• /
• 2008

Large eddy simulations have been performed within and over different types of urban building arrays. This paper adopted three dimensionless parameters, building frontal area density (${\lambda}_f$) the variation degree of building height (${\sigma}_h$), and the staggered degree of building range ($r_s$), to study the systematic influence of building spacing, height and layout on wind and turbulent characteristics. The following results have been achieved: (1) As ${\lambda}_f$ decrease from 0.25 to 0.18, the mean flow patterns transfer from "skimming" flow to "wake interference" flow, and as ${\lambda}_f$ decrease from 0.06 to 0.04, the mean flow patterns transfer from "wake interference" flow to "isolated roughness" flow. With increasing ${\lambda}_f$, wind velocity within arrays increases, and the vortexes in front of low buildings would break, even disappear, whereas the vortexes in front of tall buildings would strengthen and expand. Tall buildings have greater disturbance on wind than low buildings do. (2) All the wind velocity profiles and the upstream profile converge at the height of 2.5H approximately. The decay of wind velocity within the building canopy was in positive correlation with ${\lambda}_f$ and $r_s$. If the height of building arrays is variable, Macdonald's wind velocity model should be modified through introducing ${\sigma}_h$, because wind velocity decreases at the upper layers of the canopy and increases at the lower layers of the canopy. (3) The maximum of turbulence kinetic energy (TKE) always locates at 1.2 times as high as the buildings. TKE within the canopy decreases with increasing ${\lambda}_f$ and $r_s$ but the maximum of TKE are very close though ${\sigma}_h$ varies. (4) Wind velocity profile follows the logarithmic law approximately above the building canopy. The Zero-plane displacement $z_d$ heighten with increasing ${\lambda}_f$, whereas the maximum of and Roughness length $z_0$ occurs when ${\lambda}_f$ is about 0.14. $z_d$ and $z_0$ heighten linearly with ${\sigma}_h$ and $r_s$, If ${\sigma}_h$ is large enough, $z_d$ may become higher than the average height of buildings.

• The KIPS Transactions:PartA
• /
• v.16A no.6
• /
• pp.481-488
• /
• 2009

GIS is used to isolate large power electrical equipment using SF6 gas. While GIS has simple structure, it has few break down, relatively high reliability. But it is hard to check up faults for reason of pressure. Faults of GIS should have a ripple effect on community and be hard to recovery. Consequently, GIS imports a preventive diagnostic system to find internal faults in advance. It is most important that reliability on the GIS preventive diagnostic system, because it estimates abnormality of system by analysis result of collected data. But, exist system which used central data management is low efficiency, and hard to guarantee timeliness and accuracy of data. To guarantee timeliness and accuracy, the GIS preventive diagnostic system needs accordingly to use a real-time middleware. So, in this paper, to improve reliability of the GIS preventive diagnostic system, we use a middleware based on TMO for guaranteeing timeliness of real-time distributed computing. And we propose an improved GIS preventive diagnostic system applying data acquisition, monitoring and control methods based on the TMO model. The presented system uses the Communication Control Unit(CCU) for distributed data handling which is supported by TMO. CCU can improve performance of the GIS preventive diagnostic system by guaranteeing timeliness of data handling process and increasing reliability of data through the TMO middleware. And, it has designed to take full charge of overload on a data acquisition task had been processed in an exist server. So, it could reduce overload of the server and apply distribution environment from now. Therefore, the proposed system can improve performance and reliability of the GIS preventive diagnostic system and contribute to stable operation of GIS.