• 제목/요약/키워드: Break-In

검색결과 3,253건 처리시간 0.034초

한국인의 SLC25A26 유전자 다형성과 위염, 위궤양과의 상관성에 관한 연구 (A Study on the Correlation between SLC25A26 Polymorphism and Gastritis and Gastric Ulcers in Koreans)

  • 박소연;황다현
    • 대한임상검사과학회지
    • /
    • 제55권4호
    • /
    • pp.291-297
    • /
    • 2023
  • 위염과 위궤양은 위 점막에 염증이 생기고 상처가 생기는 것을 말한다. 과거 연구는 주로 환경적 요인이 위 질환의 주요 요인이라는 관점에서 이루어졌으나, 최근 유전자 연구의 발전으로 유전적 요인의 중요성이 강조되고 있다. SLC25A26은 활성산 소종의 축적과 관련이 있는 유전자이다. 산화 스트레스는 염증반응을 촉진하여 활성 산소를 증가시키고 세포 손상을 유발하기 때문에 이는 위 질환의 발생과 관련이 있을 것이라 추정된다. 본 연구에서는 SLC25A26과 위 질환과의 연관성을 분석하였다. 국내 위 질환 환자 1,369명과 건강한 대조군 7,471명을 대상으로 SLC25A26 내 다형성을 분석하였다. 그 결과 11개의 단일 염기 다형성(single nucleotide polymorphism, SNP) (genotype)과 13개의 SNP (imputation)가 통계적인 유의성(P<0.05)을 가지고 높은 위 질환과의 상대 위험도를 보였다. 그 중 SLC25A26의 rs13874가 위 질환과 높은 연관성을 보였다. 유전자형 기반 mRNA 발현 분석에 따르면 SLC25A26이 minor allele를 가지면 mRNA 발현이 증가하고 이는 산화 스트레스를 증가시킬 가능성이 있다. 결론적으로 SLC25A26 다형성은 위질환과 관련이 있어 우리나라 인구에서 위 질환 관리의 새로운 지침에 대한 근거를 제공할 수 있을 것이다.

Interface Control to get Higher Efficiency in a-Si:H Solar Cell

  • Han, Seung-Hee;Kim, En-Kyeom;Park, Won-Woong;Moon, Sun-Woo;Kim, Kyung-Hun;Kim, Sung-Min
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
    • /
    • pp.193-193
    • /
    • 2012
  • In thin film silicon solar cells, p-i-n structure is adopted instead of p/n junction structure as in wafer-based Si solar cells. PECVD is the most widely used thin film deposition process for a-Si:H or ${\mu}c$-Si:H solar cells. Single-chamber PECVD system for a-Si:H solar cell manufacturing has the advantage of lower initial investment and maintenance cost for the equipment. However, in single-chamber PECVD system, doped and intrinsic layers are deposited in one plasma chamber, which inevitably impedes sharp dopant profiles at the interfaces due to the contamination from previous deposition process. The cross-contamination between layers is a serious drawback of single-chamber PECVD system. In this study, a new plasma process to solve the cross-contamination problem in a single-chamber PECVD system was suggested. In order to remove the deposited B inside of the plasma chamber during p-layer deposition, a high RF power was applied right after p-layer deposition with SiH4 gas off, which is then followed by i-layer, n-layer, and Ag top-electrode deposition without vacuum break. In addition to the p-i interface control, various interface control techniques such as FTO-glass pre-annealing in O2 environment to further reduce sheet resistance of FTO-glass, thin layer of TiO2 deposition to prevent H2 plasma reduction of FTO layer, and hydrogen plasma treatment prior to n-layer deposition, etc. were developed. The best initial solar cell efficiency using single-chamber PECVD system of 10.5% for test cell area of 0.2 $cm^2$ could be achieved by adopting various interface control methods.

  • PDF

대형소매업체와 중소납품업체들 간 삼자 협력 네트워크에 의한 신제품개발: 대·중·소 동반성장 사례 (A Three-Way Collaborative NPD Network between a Large Retailer and Small and Medium-Sized Suppliers: A Case of Win-Win Growth)

  • 전종근;임수연;김주영
    • 기업가정신과 벤처연구
    • /
    • 제19권2호
    • /
    • pp.37-52
    • /
    • 2016
  • 신제품 개발 과정에서 성공적인 혁신을 창출하기 위해서는 외부 파트너와의 원활한 협력관계 뿐만 아니라 부서 간 장벽을 허무는 노력도 요구된다. 이 연구는 대중소 기업간 신제품 개발 협력과정에서 혁신창출의 성공요인들이 어떻게 작용하는지 분석하였다. 대형 소매업체와 두 개의 중소협력사들의 협력관계 구축을 통한 신제품 개발 과정에 대한 사례 분석을 실시한 결과 적어도 단기적으로는 중소협력사들이 매우 큰 성장율을 달성하였음을 발견하였다. 기업 간 협력을 통한 혁신의 성공요소들 가운데, 대기업의 관계 특정적 투자가 중소협력업체의 참여 동기에 결정적 영향을 미쳤음을 발견하였다. 또한 두 개의 중소협력사들이 직접 상호작용하는 이른바 '폐쇄적' 네트워크를 구축하여 신제품 개발에 필요한 지식을 창출함으로써 짧은 시간에 고품질의 상품개발에 성공할 수 있었다. 식품산업에서 소매업체와 공급업체간 협력에 의한 신제품 개발에 관한 기존 연구들이 커뮤니케이션 문제를 야기하는 상호 입장 차이를 성패결정의 핵심요소 중 하나로 보았으나 본 연구에서는 대기업과 중소기업간 협력의 경우 대형 소매업체의 주도적 역할이 오히려 핵심적 기능을 한 것으로 나타났다.

  • PDF

장애물이 없는 평탄지형 제내지에서의 범람홍수파 선단 전파거리 실험식 산정 (Empirical Formula for Propagation Distance of Flood Wave-front in Flat Inundation Area without Obstacle due to Levee Breach)

  • 윤광석;이정규
    • 한국수자원학회논문집
    • /
    • 제40권10호
    • /
    • pp.833-840
    • /
    • 2007
  • 본 연구에서는 장애물이 없는 평탄지형의 제내지에서 제방붕괴에 의한 범람홍수파 선단의 전파 특성을 규명하기 위하여 제내지와 하도로 이루어진 실험수조에서 실험을 수행하여 전파 거리를 산정하였다. 실험에 의해 측정된 전파 거리를 시간에 대한 상관식으로 나타내기 위하여 댐붕괴에 의한 수로에서의 홍수파의 1차원 흐름 해석해인 Hitler의 해를 검토하고, 제내지 범람홍수파의 특성을 표현할 수 있도록 확장하여 실험식의 일반형을 제시하였다. 범람홍수파의 전파속도는 댐붕괴에 의한 흐름과 마찬가지로 초기수위가 지배적인 영향을 준다는 사실을 실험을 통해 밝혔으며, 실험결과를 무차원 시간 T와 무차원 전파거리 L로 나타내어 실험식을 도출하였다. 무차원 전파거리 L을 산정하기 위한 상수로서 k와 m이 도입되었는데, Hitter의 해에서는 k가 2이고, m이 0인 반면에 본 실험에서는 k와 m이 무차원 시간 T의 구간에 따라 달라지는 상수임을 알 수 있었다. 이는 전파속도가 제내지에서의 범람홍수심에 영향을 받기 때문이며, 전파거리와 최대수심의 포락선의 기울기가 변하는 L값이 일치한다는 사실로 확인할 수 있었다.

종방향 분할형 관형지지물 개발 (Development of Vertical Separated Tubular Steel Pole)

  • Lee, Won-kyo;Mun, Sung-Duk;Shin, Kooyong
    • KEPCO Journal on Electric Power and Energy
    • /
    • 제5권4호
    • /
    • pp.257-262
    • /
    • 2019
  • Lattice steel towers for overhead transmission lines have been replaced by tubular steel poles due to the visual impact of large and complex shape of truss type. Demand for tubular steel poles consisting of a single frame member continues to grow because of its advantages such as visual minimization, architectural appeal and minimal site consumptions. However, there are some constraints on the transportation and construction. As the diameter of tower base has been enlarged, it may exceed minimum height limit required to pass the tunnel in case of land transportation. Also, in a narrow place where it is not easy to secure the installation areas such as mountainous places, there might be some areas wherein it must secure a wide working space so that large vehicles and working cranes will be allowed to enter. In this paper, we presented a vertical separated tubular steel pole, which is a new type of support that can be implemented for general purpose such as mountainous areas or narrow areas to improve the issues raised by breaking away from the conventional design and fabrication methods. Technical approaches for overcoming the limit of the cross-sectional size is to separate and modularize the cross-section of the tubular steel pole designed with a size that cannot be carried or assembled, and to lighten it with a weight capable of being transported and assembled in a narrow space or mountainous area. As a result of this research, it will be possible to enter small and medium sized vehicles in locations where it is restricted to transport by large-sized vehicles. In the case of mountainous areas, it will be possible to divide it into a weight capable of being carried by a helicopter and it will be easy to adjust and fabricate it with individual modules. Furthermore, in order to break away from the traditional construction method, we proposed the equipment that can be applied to the assembly of Tubular Steel Pole without using a large crane in locations where there is no accessible road or in locations wherein large cranes cannot enter. In particular, this paper shows the movable assembling equipment and some methods that are specialized for vertical separated tubular steel pole consisting of members with reduced weight. The proposed assembly equipment is a device for assembling the body of the Tubular Steel Poles. It will be installed inside the support and the modules can be lifted by using the support itself.

기관지 천식의 초기 발병시 임상적 양상에 관한 관찰 (The Clinical Observations in Childhood Asthma)

  • 송기연;박용훈;전진곤;이영환;김춘동
    • Journal of Yeungnam Medical Science
    • /
    • 제9권2호
    • /
    • pp.239-247
    • /
    • 1992
  • 1) 천식의 초기 발병 호발 연령은 5세 미만이었고 남아에서 여아보다 2.9배가 더 많았다. 2) 천식의 계절별 발생 빈도는 가을철에 많았고 특히 9월에 가장 많이 발생하였다. 3) 과거력상 다른 알레르기성 질환을 경험한 경우는 환아의 22.4%였고, 영유아시 모세기관지염을 앓은 환아는 12.7%였다. 4) RAST 검사중 가장 많은 양성을 보인 것은 진드기와 집먼지 순이었다. 5) 천식 환아에서 호산구 증다증을 보인 경우는 29.1%였고, 혈청 IgE 치가 200 $IU/m{\ell}$ 이상으로 증가된 경우는 63.2%였다. 6) 천식 환아에서 남녀간의 구분에 따른 혈청 IgE 치의 차이나 다른 알레르기성 질환의 동반 유무에 따른 혈청 IgE 치의 차이는 없었다. 7) 천식 환아에서 연령별로 조사한 혈청 IgE 치는 학동기 연령군($1139.9{\pm}470.2IU/m{\ell}$)이 학동기 전 연령군($361.6{\pm}470.2IU/m{\ell}$)에 비해 높은 수치를 보였다(p<0.01).

  • PDF

도시미화와 예술: '길 위의 예술'에 대한 비판적 소고 (City Beautification and Art: Some Critical Reflections on "Art on the Street")

  • 임성훈
    • 미술이론과 현장
    • /
    • 제10호
    • /
    • pp.47-61
    • /
    • 2010
  • What is Art on the street? Is it a series of artworks or activities performed on the street? In other words, does "art on the street" refer to "Street Art" such as street performance, happening, graffiti, or wall-painting, or does it refer to "Street Furniture" which is related to "City Design" or "Environmental Design"? In a formal sense, they all belong to Art on the street. However, in this paper, I would like to use Art on the street in an even broader sense. To me, " the street" is a metaphor of "environment." Thus Art on the street is the art related to environment; it is an environment art. Art on the street attests the expansion of the concept of art and shows a new possibility of contemporary art. It is a promising new concept of art, but we cannot ignore the misapplication of the concept that we can find at the crossroad of Art on the street and "city beautification." Of course, Art on the street can and sometimes needs to beautify the city. However we still need to ask how to contribute to the city beautification with Art on the street and how to validate such a practice. City space is, most of all, a space that people live in. It sounds a cliche, but it is worth repeating to better understand Art on the street. When we consider the city space in terms of its system or organization, we often overlook that it is the space in which people live, and which people create. Art on the street concerns not the city itself, but the space in which people live and make relations for each other. Without taking this into account, Art on the street becomes a mere means to' embellish' the city and falls prey to the logic of capital. In this paper, I critically reviewed the problems such as City Development, Spectacularization, City Environmental Design, Public Interest and City Museum. I intended to emphasize that Art on the street is produced in the cultural space of city, but it also tends to break the mold of the cultural space and seeks a new possibility. Some might argue that my claims are unrealistic because Art on the street is not an idea but a practice. While humbly accepting the objection, I hope my critical suggestions guide a more productive direction to continue our discussions of Art on the street.

  • PDF

Developing the Accurate Method of Test Data Assessment with Changing Reliability Growth Rate and the Effect Evaluation for Complex and Repairable Products

  • So, Young-Kug;Ryu, Byeong-Jin
    • 한국신뢰성학회지:신뢰성응용연구
    • /
    • 제15권2호
    • /
    • pp.90-100
    • /
    • 2015
  • Reliability growth rate (or reliability growth curve slope) have the two cases of trend as a constant or changing one during the reliability growth testing. The changing case is very common situation. The reasons of reliability growth rate changing are that the failures to follow the NHPP (None-Homogeneous Poisson Process), and the solutions implemented during test to break out other problems or not to take out all of the root cause permanently. If the changing were big, the "Goodness of Fit (GOF)" of reliability growth curve to test data would be very low and then reduce the accuracy of assessing result with test data. In this research, we are using Duane model and AMSAA model for assessing test data and projecting the reliability level of complex and repairable system as like construction equipment and vehicle. In case of no changing in reliability growth rate, it is reasonable for reliability engineer to implement the original Duane model (1964) and Crow-AMSAA model (1975) for the assessment and projection activity. However, in case of reliability growth rate changing, it is necessary to find the method to increase the "GOF" of reliability growth curves to test data. To increase GOF of reliability growth curves, it is necessary to find the proper parameter calculation method of interesting reliability growth models that are applicable to the situation of reliability growth rate changing. Since the Duane and AMSAA models have a characteristic to get more strong influence from the initial test (or failure) data than the latest one, the both models have a limitation to contain the latest test data information that is more important and better to assess test data in view of accuracy, especially when the reliability growth rate changing. The main objective of this research is to find the parameter calculation method to reflect the latest test data in the case of reliability growth rate changing. According to my experience in vehicle and construction equipment developments over 18 years, over the 90% in the total development cases are with such changing during the developing test. The objective of this research was to develop the newly assessing method and the process for GOF level increasing in case of reliability growth rate changing that would contribute to achieve more accurate assessing and projecting result. We also developed the new evaluation method for GOF that are applicable to the both models as Duane and AMSAA, so it is possible to compare it between models and check the effectiveness of new parameter calculation methods in any interesting situation. These research results can reduce the decision error for development process and business control with the accurately assessing and projecting result.

존 듀이의 트랜스액션을 통한 감성디자인 이해 (Understanding Sensible Design through John Dewey's Transaction)

  • 허진
    • 한국콘텐츠학회논문지
    • /
    • 제13권1호
    • /
    • pp.156-163
    • /
    • 2013
  • 과거 미디어를 통한 인식의 확장은 '정보'였다. 그러나 앞으로의 미디어의 주된 목적은 정보의 전달이 아닌, 정보를 통해 인식되어지는 개인의 '감성'과 '경험'의 가치공유에 목적을 두게 될 것이다. 현대에서 개인의 감성이 이슈화되기 시작한 것은 모더니즘 이념의 한계성과 포스트모더니즘에서 시작된 인간사고의 자율적 인식의 팽배에서 비롯된 것으로 볼 수 있다. 그러나 물질만능주의에 한계를 느낀 지금시대에 다시금 마케팅을 위한 기능위주의 감성적 접근이라면 우리는 인간 본연의 가치이며, 새로운 소통의 가치로 재인식되고 있는 '감성'이 한순간 유행처럼 끝날 수도 있다는 점에 유념하여야 한다. 따라서 본 논문에서는 인간의 잠재된 인식작용인 감성의 개념을 알아보기 위한 방법으로 존 듀이의 '트랜스액션'에 대하여 살펴보고자 한다. 듀이의 트랜스액션이란, 인간과 환경간의 상호교호 관계적 활동과 거기에 수반되는 일체의 인식과정을 지칭하는 용어로, 인간 감성과 사용자의 경험 그리고 환경을 유기체적 순환관계로 해석한다. 이러한 이해는 과거 주체와 대상간의 이분법적 소통의 한계를 벗어나 광범위한 환경에서의 인식의 관계를 확장함으로서, 개발자와 사용자간의 의식의 경계를 허물고 다양한 각도에서 감성을 공유하고 경험을 표현할 수 있는 디자인 방법을 모색하게 한다.

주빌리 정의를 위한 주빌리 교육의 내용 (The Contents of Jubilee Education for Jubilee Justice)

  • 유은주
    • 기독교교육논총
    • /
    • 제62권
    • /
    • pp.285-311
    • /
    • 2020
  • 최근 코로나 19 전염병의 확산을 비롯해 다양한 위기들로 인해 수많은 사람들이 경제적인 어려움을 겪는 가운데 기독교교육은 어떤 역할을 수행할 수 있을지를 고민하는 과정 속에서 본고는 구약의 희년사상에 초점을 맞춰 현대적 맥락에서 주빌리 정의가 어떻게 구현될 수 있을지를 모색한다. 희년법은 노예해방과 부채면제, 토지반환과 휴경의 네 가지 내용으로 구성되어 있으며, 궁극적으로 인간의 노예화를 막고 평등을 보존하려는 데 그 주된 목적이 있다. 그럼에도 불구하고, 희년사상은 그동안 신학적으로나 상황적으로 왜곡되어 기독교교육의 현장에서 간과됨으로써 사회정의를 위한 기독교적 실천에 있어서 한계가 존재했다. 하지만 희년사상은 기독교의 사사화 문제라든지, 신자유주의적 세계화로 인한 양극화의 심화 등 현대 사회의 다양한 문제들을 극복할 수 있게 하는 한 가지 대안이 될 수 있으며, 사회정의를 실천하는 데 긍정적인 기여를 할 수 있다. 즉, 희년사상은 제도적 차원에서 잘못된 법률과 제도를 개혁하며 가난한 사람들을 위한 제도를 확립하는 데 있어서, 또한 개인적 차원에서 공유경제의 실천 및 인식 변화의 측면에 있어서 성서적 모티브로 작용할 수 있다. 이처럼 가난으로 고통 받는 사람들을 위한 주빌리 정의를 지향하는 주빌리 교육은 다양한 간학문적인 지식들을 토대로 하여 인식적 차원으로는 기존의 잘못된 통념을 깨뜨림으로써 학습자들의 의미관점의 전환을 돕고, 실천적 차원에서는 사회구조의 변화를 위해 여론의 활성화 등 사회적 행동을 지원한다. 이로써 기독교교육의 학습자들이 불의한 사회를 변혁하기 위한 공적 역할을 책임 있게 수행할 수 있기를 기대한다.