• Food Science and Biotechnology
• /
• v.14 no.1
• /
• pp.112-116
• /
• 2005

Composite films were prepared with soy protein isolate (SPI) and various clay minerals by casting from polymer and clay water suspension. Effects of clay minerals on film thickness, moisture content (MC), tensile strength (TS), elongation at break (E), water vapor permeability (WVP), and water solubility (WS) were tested. Properties including thickness, surface smoothness, and homogeneity of films prepared with organically modified montmorillonite (O-MMT), Wamok clay (W-clay), bentonite, talc powder, and zeolite were comparable to those of control SPI films. TS increased significantly (p<0.05) in films prepared with O-MMT and bentonite, while WVP decreased significantly (p<0.05) in bentonite-added films. WS of most nanocomposite films decreased significantly (p<0.05).

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.313-315
• /
• 1994

In this paper, it is consider spike voltage that is generated by ignoring the recovery time of switching device, turn on and turn off time. In the same principle, this spike voltage will be applicable to diode recovery time. The spike voltage causes to break down insulation of input transformer. So, we will show how to remove spike voltage by optimizing value of R and C and using switching diode which have fast recovery time.

• Journal of Korea Water Resources Association
• /
• v.31 no.4
• /
• pp.429-437
• /
• 1998

The numerical model named "DWOPER-LEV" for the uncertainty analysis of flood inundation is developed. DWOPER model is expanded to compute overtopping risks of levee and to predict the range of the possible flood extent. Monte-Carlo simulation is applied to examine the uncertainties in cross section geometry and Manning's roughness coefficient. The model is applied to an actual levee break of the South Han River. The risks of overtopping are computed and the possible range of inundated area and inundated depth are estimated.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.29 no.1
• /
• pp.26-33
• /
• 2006

The potential needs as well as visible needs of customer should be considered in order to research and analyze of the customer data. The methods to analyze customer data is classified into customer segmentation, clustering analysis model, forecasting customer response probability model, analysis of the customer break rate model and new customer analysis model by the purpose. In this study, we developed the CW-CLV (Correlation Weight Customer Lifetime Value)method that used AHP(Analytic Hierarchy Process)rule for enhance the reliability of customer data and quantitative analysis of the customer segmentation, based on CLV(Customer Lifetime Value). We suggest to new variables and methodology from determined CW-CLV coefficients, because all of companies respect to the diversified customers classification and complexity of consumers needs. Finally, we unfolded any company's scheduling added new methodology using simulation and leaded conclusion about the new methodology.

• Proceedings of the Safety Management and Science Conference
• /
• 2002.11a
• /
• pp.157-163
• /
• 2002

Automated manufacturing systems are applied to shop floors as a tool for the increase of productivity and quality and the decrease of manufacturing lead times and industry accidents. One of the most important issue of the present day is the application of Internet. The development of Internet technologies makes manufacturing enterprises break spacial barriers between users and shop floors, and collect various field data in remote sites. In this research, an Internet-based remote control system for a small-sized automated storage and retrieval system is developed for the purpose of real-time monitoring and control of automatic production equipment. The developed system has a client-server architecture and transmits real-time images of the automated storage and retrieval system to a client by ar CCD camera connected to a server. Based on the transmitted images, the client sends commands to PLC of the server, and part storage and retrieval tasks are executed.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.327-331
• /
• 2008

This paper dealt with high speed breaking method to parallel arcing in low-voltage systems. The proposed high speed breaking circuit consists of a Rogowski coil and an integrator, and operates with an earth leakage circuit breaker (ELCB). A parallel arcing state was simulated by a short circuit using stripped wires. In this test, we analyzed tripping characteristics of the circuit breaker by the length of wires from 5m to 30m. From the experimental results, we confirmed that the proposed method can break the parallel arcing within a few millisecond.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3372-3376
• /
• 2013

The kinetic studies on the reactions of ethyl methyl (2) and ethyl propyl (4) chlorothiophosphates with X-pyridines have been carried out in acetonitrile at $35.0^{\circ}C$. The free energy correlations with X show biphasic concave upwards with a break point at X = H (2) and 3-Ph (4), respectively. A stepwise mechanism with a rate-limiting leaving group expulsion from the intermediate is proposed based on the magnitudes of selectivity parameters for both substrates. The considerably large values of ${\beta}_X$ = 1.50(2) and 1.44(4) with strongly basic pyridines and relatively small values of ${\beta}_X$ = 0.43(2) and 0.36(4) with weakly basic pyridines are interpreted as a change of the attacking direction of the X-pyridines from a frontside to a backside attack toward the chloride leaving group.

• Journal of Power System Engineering
• /
• v.4 no.4
• /
• pp.108-115
• /
• 2000

The continuous chip in turning operation deteriorates the precision of workpiece and can cause a hazardous condition to operator. Thus the chip form control becomes a very important task for reliable turning process. Using the difference of energy radiated from the chip, the chip form is identified using the neural network of supervised data. The feed mechanism is adjusted in order to break continuous chip according to the result of the chip form recognition and shows a good approach for precision turning operation.

• Journal of the Korea Society of Computer and Information
• /
• v.5 no.2
• /
• pp.105-114
• /
• 2000

In this Paper in order to break with real-time position of signal source which have first dimension motion, the N antenna is arrayed with half-circle, the incident angle of signal source from receiving power pattern to receive at receive antenna is estimated and measured, and the system that measure horizontal moving distance of signal source is designed. Signal source is constructed by 10-20dBm transmitter power which frequency is 10.52GHz of X band, and on horizontally moving the position of signal source. validity of new method is confirmed.

• Journal of Chest Surgery
• /
• v.26 no.1
• /
• pp.12-17
• /
• 1993

Among the many deleterious effects of cardiopulmonary bypass[CPB], deterioration of plasma lipoprotein is a significant problem. Break-down of lipoprotein releases free fatty acids into the systemic circulation which, in turn, can cause microembolism. This study conducted on 30 patients undergoing CPB, was designed to elucidate the changes of plasma lipoproteins during and after CPB. Blood samples were taken at pre-CPB, on-CPB 30 minutes and 60 minutes, postoperative 1st, 3rd, 7th days. The levels of total cholesterol and triglyceride were measured and lipoprotein was subdivided into three kinds on electrophoresis. During CPB, the amounts of plasma total cholesterol and triglyceride decreased significantly and were recovered to pre-CPB levels after postoperative third day. There was no significant correlation between the duration and the severity of decrease in plasma total cholesterol and triglyceride levels. During CPB, the fraction of VLDL decreased and that of LDL increased. After cessation of CPB, the fraction of LDL decreased and that of HDL increased. After postoperative 1st day, the fraction of HDL decreased and that of LDL increased.