• Journal of Plant Biotechnology
• /
• v.8 no.1
• /
• pp.51-55
• /
• 2006

A rapid micropropagation protocol was established for Exacum travancoricum Bedd. The effect of two cytokinins viz. BA and kinetin were studied to evaluate the propagation of plants through nodal explants. MS medium supplemented with 13.32 ${\mu}M$ BA induced early bud break and subsequent production of multiple shoots. Rooting of shoots occurred when cultured on 1/2 strength MS medium supplemented with 14.7 ${\mu}M$ IBA. Rooted plants were acclimatized to greenhouse conditions. The propagated plants were transferred successfully to field with 65% success. As the plant was amenable to propagation in vitro, this can be employed as a tool for conservation of this critically endangered and endemic ornamental herb.

• 한국연소학회:학술대회논문집
• /
• 2002.06a
• /
• pp.113-122
• /
• 2002

The purpose of this study is to verify that the modified Lagrangian model can predict temperature, flow and scalar fields in the high temperature recirculation region of swirling confined diffusion flame. In the meantime numerical results from EBU and Equilibrium PDF models as well as experimental results are compared with those from the modified Lagrangian model. Adaption of three different turbulent models were accompanied with this procedure. Look-up table of the ignition characteristic time scale which is one of important factors of the Lagrangian model was referred to the 11-step reduced mechanism. Eventually, results with the Lagrangian model show a good accordance with experimental results, which shows the validity of this model. Results from Chen's model differ from those of the others. Numerical results of ${\widetilde{k}$ show significant deviation from experimental results for three models.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.534-541
• /
• 2004

To boost the Korean peninsula as a logistical hub of North-East Asia in 21st century is an important part of Korean development strategies. This research has been conducted on the premise that the connection and operation of the Korean Peninsula break-railway and Euro-Asian railway network will be a great drive for Korean economy and railway technology development. For the preparation to do a further research on this subject, this paper introduces the general condition and related basic material for the railway network operation through the countries along the corridor. It also provides the basic data of railway and actual operation condition in the involved Euro- Asian areas, such as Russia, China, Mongolia, Kazakh-stan, etc.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.1342-1346
• /
• 2004

Recently, the load increasement and regenerative system of electrified railway system make a difficult to distinguish between the load current and fault current and it need a new intelligent protection system. The failure of traction system cause collapse of the other systems from high tension current. The over current from abnormal situation produces high tension current flow, high temperature are, voltage instability and current cutting, and break down railway systems. Protective system of traction system playa role of which detect and isolate failure points. In this paper, we proposed intelligent algorithm for discriminating normal and abnormal situation instead of the system being operated abnormally.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.3
• /
• pp.37-42
• /
• 2003

Physical properties of paper can be explained in terms of the changes in fiber's morphological properties. As the paper machine speed increases, the basis weight decreases and the mixing ratio of inferior recycled fibers increases, paper break becomes important than ever before. One of the objectives of this study is to analyze paper's physical, mechanical and fracture mechanical properties depending on softwood(SW) and hardwood(HW) mixing ratios and recycling. Fibers were refined by Valley beater to 450 mL CSF. Handsheets of 30 g/$\textrm{m}^2$ were prepared at different mixing ratios. Fracture toughness was measured as the amount of energy applied to cracked sample before total failure. Fracture toughness showed different trend to other strength properties. At the mixing ratio of SW 80: HW 20, papers showed the maximum fracture toughness. At this mixing ratio, flexible softwood fibers were mostly broken and stiff hardwood fibers were mostly pulled out.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2007.09a
• /
• pp.127-137
• /
• 2007

Faults are fractures along which there is visible offset by shear displacement parallel to the fracture surface. Faults can occur as single discrete breaks, but where the rock has been repeatedly faulted, or where the rock is especially weak, no discrete break may be evident. What forms instead is a fault zone composed of countless subparallel and interconnecting closely spaced fault surfaces. Faulting is fundamentally a brittle mechanism for achieving shear displacement. At deep crustal levels where rocks tend to deform plastically under conditions of elevated temperature and confining pressure, shear displacement is achieved by and development of shear zones. In this paper authors propose the fault grade in Korea.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.92-97
• /
• 2006

Motion artifact of Display devices has a huge interest from industries and users recently. Among those artifacts, color break up (CBU) is one of the key degrading characteristic in field sequential type displays. Unfortunately, there are no objective measurement methods for CBU. Here we introduce two different kinds of CBU and its measurement methods. The CBU characteristic of LCD, DLP, and PDP was measured and compared.

• Journal of Ocean Engineering and Technology
• /
• v.9 no.1
• /
• pp.83-91
• /
• 1995

Surface defects in structural members are apt to be origins of fatigue cracks growth, which may cause serious failure of whole structures. Most structure has a part where stress concentrates such as welded joints, corner parts, etc. And then, analysis on crack growth and penetration from these defects, therefore, is one of the most important subjects for the reliability of LBB design. The present paper has performed an experimental and analysis on the fatigue crack propagation by variety in crack length of surface cracked plate with stress concentration part. The crack growth behavior can be explained quantitatively by using Newman-Raju equation and the stress partitioning method proposed by ASME B&P Code Sec. XI. The stress concentration factor $K_t$ has affected on the crack growth. The crack growth after penetration depends upon the initial front side crack length.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.451-452
• /
• 2008

In this paper we describe a multi-module, multi-port memory design procedure that satisfies area and/or energy constraints. Our procedure uses ILP models to determine (a) the memory configuration with minimum area, given the energy bound, (b) the memory configuration with minimum energy, given the area bound. If we have a margin in time constraint, we break up conflict edges and expend the search space of ILP. This method effectively reduces area and power of the designed results.

• Journal of The Korean Astronomical Society
• /
• v.29 no.spc1
• /
• pp.195-196
• /
• 1996

We observed CO J = 2 $\to$ 1 and J = 3 $\to$ 2 lines toward several star formation regions with extremely high velocity (EHV) outflows: W3 IRS5, W28 A2, GL2591, S140, and Cepheus A. The full width of the wings are 90-235 km $s^{-1}$. Some wings show clear break of slope in the line profile implying that the nature of the EHV outflow is different from that of the high velocity outflow. We suggest that the EHV CO wing emission is tracing CO molecules in the stellar wind or jet which drives the high velocity outflow.