• Journal of the Korea Convergence Society
• /
• v.6 no.6
• /
• pp.293-299
• /
• 2015

MOOC (Massive Open Online Course) is an online course aimed at limited participation and open access via the web. There is even the prospect that MOOC may break down the existing university system and open a new horizon of education. However, MOOC is going differently from the first prospect that it would threat the existing higher education institutions. So this study wishes to provide a starting point of discussion that we can produce and utilize MOOC to fit our situation of higher education by revealing the inherent problems of MOOC. MOOC is a basically online education, so that it cannot help inheriting the essential weakness of the existing one: the interaction, supervision and evaluation. The newly added concept 'massive' raises the problem of class size which is the most sensitive part in the field of education. The concept 'open' reverses a customized education because MOOC is a kind of video clips of a lecture for unspecific massive learners. As a conclusion, we predicts that MOOC will be positioned as a higher education service for very prominent learners in self-led learning ability and people who cannot access even traditional online higher education institutions. Also MOOC is highly likely to be used as a means of Flipped Learning in universities. Therefore, considering these points in the future, we need to develop MOOC to suit these targets.

• Tunnel and Underground Space
• /
• v.21 no.3
• /
• pp.151-163
• /
• 2011

The LCM test is one of the most powerful and reliable methods for designing the disc cutter and for predicting the TBM (Tunnel Boring Machine) performance. It has an advantage to predict the actual load on disc cutter from the laboratory test on the real-size large rock samples, however, it also has a disadvantage to transport and/or prepare the large rock samples and to need an extra cost for experiment. Moreover it is not easy to execute the test for jointed rock mass, and sometimes the design model estimated from the test can not be applied to the real design of disc cutter. In order to break this critical point, lots of numerical studies have been performed. PFC2D can simulate crack propagation and rock fragmentation effectively, because it is useful in particle flow analysis. Consequently, in this study, the PFC2D has been adopted for numerical analysis on cutting power of disc cutter according to the different angle of joint, the different direction of joint, and the different space of joint with jointed rock mass models. From the numerical analyses, it was concluded that the bigger cutting power of disc cutter was needed for reverse cutting direction to joint rather than for forward direction, and the cutting power of disc cutter was increased with decreasing the dip angle of joint and decreasing the space of joints in reverse cutting direction. The more precise numerical model for disc cutter can be developed from comparison between the numerical results and LCM test results, and the resonable guideline is expected for prediction of TBM performance and disc cutter.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.3
• /
• pp.851-856
• /
• 2012

Objective: NBS1 plays a key role in the repair of DNA double-strand break (DSB). We conducted this study to investigate the effect of two critical polymorphisms (rs1805794 and rs13312840) in NBS1 on treatment response and prognosis of advanced non-small cell lung cancer (NSCLC) patients with platinum-based chemotherapy. Methods: Using TaqMan methods, we genotyped the two polymorphisms in 147 NSCLC patients. Odds ratios (ORs) and their 95% confidential intervals (CIs) were calculated as a measure of difference in the response rate of platinum-based chemotherapy using logistic regression analysis. The Kaplan-Meier and log-rank tests were used to assess the differences in progression-free survival (PFS) and overall survival (OS). Cox proportional hazards model was applied to assess the hazard ratios (HRs) for PFS and OS. Results: Neither of the two polymorphisms was significantly associated with treatment response of platinum-based chemotherapy. However, patients carrying the rs1805794 CC variant genotype had a significantly improved PFS compared to those with GG genotype (16.0 vs. 8.0 months, P = 0.040). Multivariable cox regression analysis further showed that rs1805974 was a significantly favorable prognostic factor for PFS [CC/CG vs. GG: Adjusted HR = 0.62, 95% CI: 0.39-0.99; CC vs. CG/GG: Adjusted HR = 0.56, 95% CI: 0.32-0.97). Similarly, rs13312840 with a small sample size also showed a significant association with PFS (CC vs. CT/TT: Adjusted HR = 25.62, 95% CI: 1.53-428.39). Conclusions: Our findings suggest that NBS1 polymorphisms may be genetic biomarkers for NSCLC prognosis especially PFS with platinum-based chemotherapy in the Chinese population.

• Fire Science and Engineering
• /
• v.25 no.6
• /
• pp.32-38
• /
• 2011

As the using rate of an explosive gas has been increased in the industrial site, the regional residents adjacent to the site as well as the site workers have frequently fallen into a dangerous situation. Damage caused by accident in the process using hydrogen gas is not confined only to the relevant process, but also is linked to a large scale of fire or explosion and it bring about heavy casualties. Therefore, personnel in charge should investigate the kinds and causes of the accident, forecast the scale of damage and also, shall establish and manage safety countermeasures. We, in Anti-Calamity Research Center, forecasted the scope of danger if break out a fire or/and explosion in hydrogen gas facilities of MLCC firing process. We selected piping leak accident, which is the most frequent accident case based on an actual analysis of accident data occurred. We select and apply piping leak accident which is the most frequent case based on an actual accident data as a model of damage forecasting scenario caused by accident. A jet fire breaks out if hydrogen gas leaks through pipe size of 10 mm ${\Phi}$ under pressure of 120 bar, and in case of $4kw/m^2$ of radiation level, the radiation heat can produce an effect on up to distance of maximum 12.45 meter. Herein, we are going to recommend safety security and countermeasures for improvement through forecasting of accident damages.

• Journal of Conservation Science
• /
• v.33 no.1
• /
• pp.25-33
• /
• 2017

The stone lantern of the four guardian kings in the Beopjusa temple at Boeun was mainly made of biotite granodiorite consisting of porphyritic-textured potassium feldspar and included in ilmenite series. A base stone made of alkali granite was buried, after founded its place during an earlier restoration process. Cracking and break out are noticeable on this object. In addition, discoloration, salt crusting, and epiphytes were observed. The lantern was vulnerable in terms of physical and structural stability caused by cracking in the front and back of the light chamber and in the non-horizontal direction. According to the conservational condition of the stone lantern, structural reinforcement was carried out based on calculations, including those on the position, size, and anchor length of the titanium stiffener. Chemical and biological pollutants were washed off without damage to the surface of the stone material. Oxygenated iron pieces were replaced with titanium. Ethyl silicate was applied to the surface of the lantern for consolidation and smooth drainage.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.2
• /
• pp.90-95
• /
• 2009

Sludge pre-treatment utilizing cavitation is one of the commercialized methods at present. Cavitation can be generated by two different methods, sonotrode and hydrodynamic principle, and there has been no direct comparison between the two methods. In this study, solubilization efficiency, changes in sludge size distribution, and the methane production potential after pre-treatment by the two methods were compared. The maximum solubilization efficiency per unit energy input with the two methods was similar, and was 302 mg ${\Delta}SCOD/g$ TS at the energy input of 0.18 kWh/L. Break-up of sludge flocs were dominant during the early period of pre-treatment, while cell disintegration continued through the pre-treatment with the increase in the number of particles with less than 1 ${\mu}m$. BMP test results indicated that the methane potential increased up to 24.3% without differences between the two pre-treatments, and the increase in methane potential did not proportional to energy input. Although the energy efficiency of the two methods was quite similar, hydrodynamic methods might be a better choice for field application considering the operation and maintenance cost, and its potential improvement in energy efficiency.

• Management & Information Systems Review
• /
• v.33 no.4
• /
• pp.21-38
• /
• 2014

This study investigates whether and how a firm's cost of equity is influenced by the extent of a firms's name change. Even though corporate name change doesn't give any benefit to investors, it can be a signaling about firm's future valuation. And also, if that signaling has high credibility, it can be decrease information cost and the firm's cost of equity. on the contrary to this, if corporate name change is kind of break with the past and corporate image laundering, it is bad signaling to investors. So it can be increase information risk and the firm's cost of equity. Using yearly cross-sectional regressions of the cost of equity on our proxies for corporate name change, size, beta, market-to-book ratio and other innate risk factor over the 2005-2010, we find that the cost of capital is positively associated with corporate name change after controlling for all other factors. This result implies that corporate name change increase information risk of the business, and thus increase information asymmetries between managers and outside investors with respect to a firm's true future value. This increases information risk, and creates an adverse selection problem, on the part of outside investors. Rational investors therefore demand a premium for bearing this corporate name change-related information risk, which in turn leads us to observe a positive relation between the intensity of corporate name change and the cost of equity.

• KDI Journal of Economic Policy
• /
• v.34 no.3
• /
• pp.187-214
• /
• 2012

Korea's national income statistics have been compiled by the Bank of Korea since 1953. However, there is a break in the time series. The current time series (1970 onward) is based on the '1993 SNA (System of National Accounts)' suggested by the UN, and the previous time series (1953~1970) was based on the '1953 SNA'. The difference between the previous and current time series is 4.8% in 1970 when the two series overlap. The difference is even greater in terms of comparisons across industries. In addition, it has now become even more difficult to connect the current and the previous time series because, in 2009, the Bank of Korea introduced a chain weighted method for calculating the current time series (1970 onward). Under the chain weighted method, the time series underwent substantial modification; for instance, the economic growth rate during 1970~2005 is 0.9%p higher than the rate under the general method. This paper applies chain weighted values and the '1993 SNA' to the previous time series (1953~1970) by utilizing various national account manuals published by the UN and previous Korean input-output tables in order to calculate a long term time series from 1953 to 2010 based on the same criteria as the current time series (1970 onward). In the revised time series, it appears that 1953 GDP at current basic prices is 3.5% higher and the growth rate for the period of 1953~1970 is 1.5%p higher each year than under the previous time series. Under the revised time series the size of the Korean economy as of 2010 is 50-fold bigger than that of 1953. In terms of industries, manufacturing and SOC show significant expansion whereas the extent of that of the service industry is relatively small.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.1-8
• /
• 2018

FRP is a new material that is light, has high strength and high durability, and is emerging as a third construction material inside and outside of countries. However, very few studies have been done on curved FRP construction materials that can be used for tunnels or arched bridges. Because a small composite panel specimen is smaller than a full-size specimen, it can be used in a variety of experiments under different conditions. Therefore, in this study, experiments were performed on a void section, a solid section, a connected solid section, and a sand-coating solid section. The results of the experiment show that the connection of composite curved panels with longitudinal connections provides almost equivalent performance to that of a single panel. However, it is necessary to strengthen the connections, since the connections that are most susceptible to damage will break first.

• Asian Journal of Business Environment
• /
• v.1 no.1
• /
• pp.13-20
• /
• 2011

This study is conducted to verify existing differences in consumer attitude according to distributor type and PB product type. Pre-test was conducted for this study in order to select the distributor and to classify the product type, FGI was conducted with 10 graduate students of K university in Kyong-gi. This study survey housewives, office workers, and university students excluding the participants in the pre-test. In the final analysis, research hypothesis is verified through the data of 280 answers in Korea. This research is conducted with a factor design of 3 types of distributors -department store, discount store, convenience store-and 2 types of product -utilitarian product, hedonic product. To verify the hypotheses, ANOVA is carried out. Reliability test of each measurement variables, Cronbach α coefficient is used. For each analysis, SPSS Windows 15.0 statistical program is used. The findings suggest that First, according to the size and characteristics, distributors are classified into department stores, discount stores, and convenience stores and it is verified whether if there are differences in consumers' attitude (product attitude, brand attitude and purchase intention) by the effect of different distributors. Results showed that product attitude is statistically significant. Second, product type is classified by two categories according to whether the product seeks for practicality or emotional pleasure - Utilitarian product and Hedonic product. In this context, the result after verifying whether if there is difference in the attitudes -product attitude, brand attitude, and purchase intention - in accordance with the product types is shown that utilitarian products makes bigger difference compared to hedonic products. Third, it is confirmed that there is interaction effect between product attitude and purchase intention according to the distributer type and product type. However, we find that in terms of brand attitude, there is no interaction effect. The implications of this research is as the following. First, we propose the need of PB product development and marketing strategy, which considers the product types in accordance with the scale and features of each distributor. Second, PB products should break away from the simplicity of standardized products and consider the different features of distributors. Distributors will be in need of a strategy to build a compelling brand that can differentiate itself from other distributors. This will contribute to the improvement in reliability and formation of product value.