• Journal of the Korean Society of Safety
• /
• v.31 no.4
• /
• pp.143-149
• /
• 2016

In this study, a series of numerical simulation of dam break flow was conducted using EFDC model, and input conditions including cell size, time step, and turbulent eddy viscosity were considered to analyze parameter sensitivity. In case of coarse mesh layout, the propagated length of the shock wave front was ${\Delta}_x$ longer than that of other mesh layouts, and the velocity results showed jagged edge, which can be cured by applying fine grid mesh. Turbulent eddy viscosity influenced magnitude of the maximum velocity passing through gate up to 20% and the cell Peclet number less than 2.0 ensured no numerical oscillations.

• International Journal of Advanced Culture Technology
• /
• v.9 no.2
• /
• pp.91-99
• /
• 2021

In Korea, some pharmaceutical companies and agricultural machine manufacturers associate the length of the credit period with the retailer's order size. This kind of commercial practice is based on the principle of economy of scale from the supplier's point of view and tends to make retailer's order size large enough to qualify a certain credit period break. Also, the credit period allowed by the supplier makes it possible to reduce the retail price expecting that the retailer can earn more profits by the stimulating the customer's demand. Since the retailer's order size is affected by the end customer's demand, it is reasonable to determine the retail price and the order size simultaneously. In this regard, this paper analyzes the retailer's problem who has to decide his sales price and order quantity from a supplier who offers different credit periods depending on his order size. And we show that the retailer's order size large enough to qualify a certain credit period break. Also, it is assumed that the end customer's demand rate is represented by a linear decreasing function of the retail price.

• Journal of Biosystems Engineering
• /
• v.34 no.4
• /
• pp.228-233
• /
• 2009

In order to cut the round bale easily, a roughage cut-feeder for the round bale was developed in this study. This study consists of two parts. One is development of a cutting mechanism and a performance test reported in the previous paper. This is the second part of the study. For the study, recent trend of traditional cutting system was analyzed. Also, cost of the prototype cut-feeder was analyzed and determine the break-even point of farm size was determined by comparing with traditional method using a traditional cutter. A prototype cut-feeder was investigated with the fact that working performance, fiber length and shape of roughage and feeding quality was good. Operating cost of the prototype cut-feeder decreased rapidly with an increase of farm size. Break-even point in terms of farm size was 36 heads for beef and 28 heads for dairy. Also, costs estimated were 118,000 won/head year and 148,000 won/head year, respectively.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.435-440
• /
• 1996

Large Loss-of-Coolant Accidents analyzed in Final Safety Analysis Reports are usually covered by Reactor Inlet Header. Reactor Outlet Header and Primary Pump Suction breaks as representative cases. In this study we analyze the total (guillotine) break of an Emergency Core Cooling System (ECCS) pipe located at the ECCS injection point into the Primary Heat Transport System (PHTS). It was expected that thermal-hydraulic behaviors in the PHT and ECC systems are different from those of a Reactor Inlet Header break, having an equivalent break size. The main purpose of this study is to get insights on the differences occurred between the two cases and to assess these differences from the phenomenon behavior point of view. It was also investigated whether the ECCS line break analysis results could be covered by header break analysis results. The study reveals that as the intact loop has almost the same behavior in both analyzed cases. broken loop behavior is different mostly regarding sheath temperature in the critical core pass and pressure decrease in the broken Reactor Inlet Header. Differences are also met in the ECCS behavior and in event sequences timings.

• Journal of Biosystems Engineering
• /
• v.10 no.2
• /
• pp.27-35
• /
• 1985

This study was carried out to determine the optimum size and number of farm machines for various sizes of land coverage of the cooperative farm machinery utilization systems in Korea-namely Saemaul Mechanized Farming Group (SMFG). Fifty-one SMFG were selected from 8 counties in Chonnam province, and ownership, operation and management of farm machinery were surveyed. Annual covered area, cost and the break-even-point area of farm machinery were analyzed on the bases of the surveyed data and the present governmental subsidy policy, and then the optimum level of farm machinery ownership was determined. The results are summarized as follows: 1. The break-even-point areas of the tractors of 22-23ps, 28ps and 47-50ps were estimated as 12.1ha, 15.3ha and 21.6ha, respectively. The optimum size of a tractor for land sizes of 10-20ha, 20-30ha, and 30-40ha were estimated as 22-23ps, 28ps, and 47-50ps, respectively. 2. The break-even-point area of a rice transplanter was estimated as 3.3ha. The optimum numbers of rice transplanter for land sizes of 10-20ha, 20-30ha, and 30-40ha were estimated as 2,3, and 4, respectively. 3. The break-even-point areas of a speed sprayer (attached on power tiller) and a power sprayer were estimated as 114.6ha and 15.3ha, respectively. The optimum numbers of power sprayer for land sizes of 10-20ha, 20-30ha, and 30-40ha were estimated as 2,3 and 4, respectively. A speed sprayer is desirable for an area of more than 30ha coverage. 4. The break-even-point area of a combine was estimated as 10.7ha. The optimum numbers of combine for land sizes of 10-20ha, 20-30ha, and 30-40ha were estimated as 1,2, and 3, respectively.

• Journal of Environmental Science International
• /
• v.4 no.5
• /
• pp.95-95
• /
• 1995

This study was carried out to evaluate the variations of headloss rate and of specific deposit to depths with effective size of media and configuration of filter layer during algae blooming period. 0.51mm size media was disqualified because most of headloss occurred rapidly below 5cm from surface layer however 0.91mm size media acted deep filtration more than 20cm from top, as result 0.91mm sixte media filter had 2∼3 times longer filtration time than 0.51mm sixte media filter, but 0.91mm size media have break-through potentiality. multi-layer filter with 1.02mm anthracite and 0.51mm sand had large deposit volume in upper layer that could longer filtration time, moreover smaller media in lower layer that could protect break-through.

• Journal of Powder Materials
• /
• v.20 no.6
• /
• pp.479-486
• /
• 2013

In the present work, physicochemical treatments were introduced for de-aggregation and stable dispersion of detonation nanodiamonds (DND) in polar solvents. The DNDs in water exhibited a particle size of 138 nm and high dispersion stability without particular treatment. However, the DNDs in ethanol were severely aggregated to several micrometers in size and showed poor dispersion stability with time. To break down aggregates of DNDs and enhance the dispersion stability of them in ethanol, mechanical force and chemical surfactant were introduced as functions of zirconia ball size, kind of surfactant and amount of surfactant added. From the analyses of average particle size and Turbiscan results, it was suggested that the size of DNDs in ethanol can be reduced by only mechanical force; however, the DNDs were re-aggregated due to high surface activity. The long-term dispersion stability can be achieved by applying mechanical force to break down the aggregates of DNDs and by preventing re-aggregation of them using proper surfactant.

• Journal of Biosystems Engineering
• /
• v.15 no.3
• /
• pp.177-185
• /
• 1990

The break of rotary blade is occured from a stress concentration of the inside of blade by the outside impulsive load. In order to examine its inside stress and stress concentration of rotary blade, a epoxy plate which is suitable to applicate by photoelastic system is used to experiment. These results are summarized as follow. 1. Refer to the existence of bolt hole and a size of its of rotary blade, a stress concentration which cause the break of rotary blade is not exposed. 2. It is expected to be break to section of hold of rotary blade and the break of this is due to that there are concentrated by shearing force, bending moment and bending stress. 3. When the crack which caused from processing are set up to any location, the stress concentration taken to the creak point. 4. Without regard to the location of the reaction points of rotary blade, the bending stress which is greated than the bending moment is occured within about 6 em toward the center line of bolt hole and it was possible to break that section.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.5
• /
• pp.174-181
• /
• 1998

Experimental and analytical studies are presented to characterize the break-up mechanism and atomization processes of the intermittent- impinging-type nozzle. Gasoline jets passing through the circular nozzle with the outlet diameter of 0.4mm and the injection duration of 10ms are impinged on each other. The impingement of fuel jets forms a thin liquid sheet, and the break-up of the liquid sheet produces liquid ligaments and droplets subsequently. The shape of liquid sheets was visualized at various impinging velocities and angles using the planer laser induced fluorescence (PLIF) technique. Based on the Kelvin-Helmholtz wave instability theory, the break-up length of liquid sheets and the droplet diameter are obtained by the theoretical analysis of the sheet disintegration. The mean diameter of droplet is also estimated analytically using the liquid sheet thickness at the edge and the wavelength of the fastest growing wave. The present results indicate that the theoretical results are favorably agreed with the experimental results. The size of droplets decreases after the impingement as the impinging angle or the injection pressure increase. The increment of the injection pressure is more effective than the increment of the impinging angle to reduce the size of droplets.

• Membrane Journal
• /
• v.6 no.2
• /
• pp.109-116
• /
• 1996

This work is a fundamental study for applying hybrid process coupling adsorption with microfiltration to waste-water treatment. Phenol was separated by adsorption on powdered activated carbon, adsorbed phenol with activated carbon was separated by microfiltration. As the particle size in suspension increased, filtration resistance decreased, and effect of particle concentration on resistance was less pronounced. The rate of uptake was greatly dependent on the degree of phenol loading. For a smaller amounts of activated carbon, the change of permeate concentration before break point and phenol loading with time were steeper than in the case of large amounts. Permeate concentration before break point decreased with decreasing particle size, this could be due to the increase of outer surface of particle and film mass transfer coefficient.