• Journal of Korean Institute of Industrial Engineers
• /
• v.14 no.1
• /
• pp.91-101
• /
• 1988

Break-even analysis is a simple and useful tool in decisions and planning activities though its use is somewhat limited to short-term analysis. The subject is discussed in the fields of engineering economics, production management, cost and managerial accounting, finance, marketing, and so on. Conventional break-even analysis suits the case of stable price and low interest rate. In this paper, we try to overcome the limit by considering following factors, namely, time value of money, depreciation, tax, and capital gains. Also, considering learning effect, we increase applicability to a new project which raises certain changes such as a replacement of production process, an employee turnover, etc. Thus, we suggest a model which has a dynamic break-even quantity per period for the project. Furthermore, we examine the effect of inflation in break-even analysis.

• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.5
• /
• pp.527-536
• /
• 2010

Although the bubble-floc agglomerate floated and formed the float layer on the surface of the water in the DAF process, after inducing in the thickening tank a part of the bubble-floc agglomerate come up again to the surface and the other is settled at the bottom of the tank. The bubble-floc agglomerate divided into two group as the scum on the surface and the sludge of the bottom gives rise to operational troubles for the thickening process. In order to find out the cause of break-up and the effective thickening method for sludge from the DAF process, the composition of the bubble-floc agglomerate was investigated and a series of flotation experiments carried out. There was no difference of composition between the scum on the surface and the sludge of the bottom in the thickening tank. The coagulation was not effective to improve the trouble that the bubble-floc agglomerate divided into the scum and the sludge. It was estimated that for the bubble-floc agglomerate of thickening tank the trouble was caused by not the change or the difference of chemical composition but whether the bubble-floc agglomerate hold bubbles. Furthermore, for the effective thickening of sludge from the DAF process, it is required an additional flotation applied the AS ratio depending upon the solid concentration of sludge as the operation parameter.

• Fisheries and Aquatic Sciences
• /
• v.1 no.1
• /
• pp.48-62
• /
• 1998

Seasonal volume transport on the Texas-Louisiana continental shelf is investigated in terms of objectively fitted transport streamfunction fields based on the current meter data of the Texas­Louisiana Shelf Circulation and Transport Processes Study. Adopted here for the objective mapping is a method employing a two-dimensional truncated Fourier representation of the streamfunction over a domain, with the amplitudes determined by least square fit of the observation. The fitting was done with depth-averaged flow rather than depth-integrated flow to reduce the root-mean-square error. The fitting process filters out $11\%$ of the kinetic energy in the monthly mean transport fields. The shelf-wide pattern of streamfunction fields is similar to that of near-surface velocity fields over the region. The nearshore transport, about 0.1 to 0.3 Sv $(1 Sv= 10^6\;m^3/sec)$, is well correlated with the seasonal signal of along-shelf wind stress. The spring transport is weak compared to other seasons in the inner shelf region. The transport along the shelf break is large and variable. In the southwestern shelf break, transport amounts up to 4.7 Sv, which is associated with the activities of the encroaching of energetic anticyclonic eddies originated in Loop Current of the eastern Gulf of Mexico. The first empirical orthogonal function (EOF) of streamfunction variability contains $67.3\%$ of the variance and shows a simple, shelf-wide, along-shelf pattern of transport. The amplitude evolution of the first EOF is highly correlated (correlation coefficient: 0.88) with the evolution of the along-shelf wind stress. This provides strong evidence that the large portion of seasonal variation of the shelf transport is wind-forced. The second EOF contains $23.7\%$ of the variance and shows eddy activities at the southwestern shelf break. The correlation coefficient between the amplitudes of the second EOF and wind stress is 0.42. We assume that this mode is coupled a periodic inner shelf process with a non-periodic eddy process on the shelf break. The third EOF (accounting for $7.2\% of the variance) shows several cell structures near the shelf break associated with the variability of the Loop Current Eddies. The amplitude time series of the third EOF show little correlation with the along-shelf wind.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.4
• /
• pp.437-451
• /
• 2012

Application of 3D laser scanner to civil engineering is widely studied in various fields such as tunnel, bridge, calculation of earth volume, construction measurement, observation of rock joint, etc. Some studies on utilization of the 3D laser scanner for calculating the over-break and/or under-break of tunnels have also been carried out. However, in the previous research, the scanning data were usually compared with the 2D CAD blueprint results; although the shape of tunnel structure is relatively simple, for precise calculation of the over-break and/or under-break of tunnels, three-dimensional analysis based on BIM is needed. Therefore, in this paper, a new program that calculates the over-break and/or under-break of tunnels using the 3D laser scanner and the BIM is developed; moreover the effective and rapid process of data treatment is proposed. The accuracy of the developed program was verified by applying the new system to a real tunnels construction field.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.241-241
• /
• 2009

For the Radio Frequency Integrated Passive Device (RFIPD) application, we have successfully developed and characterized high break-down voltage metal-insulator-metal (MIM) capacitors with 2,000 ${\AA}$ plasma-enhanced chemical vapor deposition (PECVD) silicon nitride which deposited with $SiH_4/NH_3$ gas mixing rate, working pressure, and RF power of PECVD at $250^{\circ}C$ chamber temperature. At the PECVD process condition of gas mixing rate (0.957), working pressure (0.9 Torr), and RF power (60 W), the AFM RMS value of about 2,000 ${\AA}$ silicon nitride on the bottom metal was the lowest of 0.862 nm and break-down electric field was the highest of about 8.0 MV/cm with the capacitance density of 326.5 $pF/mm^2$.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.560-562
• /
• 2004

$SF_6$ gas has been increasingly used as the insulating and arc-suppressing medium in switchgears which are used as the protection devices of power system. Nowadays, most of power companies adopted the $SF_6$ gas-type load break switch for increasing the reliability of distribution network by its superior durability against external environmental condition, in substitution for air-type and oil-type switches. But, it is important to establish the general estimation process for the testing and estimation for long-term reliability Accordingly, the national standard(RS C0031) was made for the reliability assessment of $SF_6$ gas load break switch and the testing facilities were also set in KERI(Korea Electrotechlology Research Institute). This paper presents the requirements of RS C0031 for reliability assessment of $SF_6$ gas load break switch and synopsis of the accelerated life testing facilities for $SF_6$ gas load break switch.

• Journal of the Korean Society of Costume
• /
• v.66 no.4
• /
• pp.146-165
• /
• 2016

The aim of the study is to propose ways to improve the break line fit of women's tailored collar vests by modifying the patternmaking process. The study explored the fit effects of experimental vests with a focus on 3 different breast sizes, A, B, and C cups. Women in the ages between 20 and 24 in South Korea were targeted. In order to carry out the objective, the study implemented separate girth measurements for the front and the back of the tailored collar vests, and also allocated different dart amounts on the lapel through the break line according to the different breast cup sizes. The study adopted a 5-point rating scale to perform evaluation of the different fit effects caused by the varying dart amounts given on the experimental vests' break lines. This evaluation was carried out by apparel pattern experts. The results derived from the study were as follows: first, the implementation of separate girth measurements provided originality to the study, as the application of different measurements for the waist back length and the neck shoulder point-to-breast point-to-waist line led to the front panels of the experimental vests having varying slack amounts. Second, break line dart was applied in three different amounts, 0.5, 1.0, and 1.5cm respectively according to A, B and C breast sizes, and as the dart amount increased, extra ease on the break lines was reduced. The dart was applied on the edge lines of the lapel and it was applied from a point which was 6cm above the breast point to the end of the princess line for all the breast cup sizes.

• Journal of the Korean Mathematical Society
• /
• v.39 no.4
• /
• pp.543-558
• /
• 2002

We investigate the fragmentation process developed by Kolmogorov and Filippov, which has been studied extensively by many physicists (independently for some time). One of the most interesting phenomena is the shattering (or disintegration of mass) transition which is considered a counterpart of the well known gelation phenomenon in the coagulation process. Though no masses are subtracted from the system during the break-up process, the total mass decreases in finite time. The occurrence of shattering transition is explained as due to the decomposition of the mass into an infinite number of particles of zero mass. It is known only that shattering phenomena occur for some special types of break-up rates. In this paper, by considering the n-particle system of stochastic fragmentation processes, we find general conditions of the rates which guarantee the occurrence of the shattering transition.

• Membrane Journal
• /
• v.6 no.2
• /
• pp.109-116
• /
• 1996

This work is a fundamental study for applying hybrid process coupling adsorption with microfiltration to waste-water treatment. Phenol was separated by adsorption on powdered activated carbon, adsorbed phenol with activated carbon was separated by microfiltration. As the particle size in suspension increased, filtration resistance decreased, and effect of particle concentration on resistance was less pronounced. The rate of uptake was greatly dependent on the degree of phenol loading. For a smaller amounts of activated carbon, the change of permeate concentration before break point and phenol loading with time were steeper than in the case of large amounts. Permeate concentration before break point decreased with decreasing particle size, this could be due to the increase of outer surface of particle and film mass transfer coefficient.

• Nuclear Engineering and Technology
• /
• v.17 no.4
• /
• pp.302-316
• /
• 1985

Small break LOCA caused by a stuck-open PORV is one of the important contributors to nuclear power plant risk. This paper deals with the design of a pressurizer surveillance system using microcomputer to prevent the malfunction of system and has assessed the effect of this improvement through Probabilistic Risk Assessment (PRA) method. Micro-computer diagnoses the malfunction of system by a process checking method and performs automatically backup action related to each malfunction. Owing to this improvement, we can correctly diagnose “Spurious Opening”, “Fail to Reclose” and “Small break LOCA” which are difficult for operator to diagnose quickly and correctly and reduce the probability of a human error by an automatic backup action.