• 건축역사연구
• /
• 제18권2호
• /
• pp.7-26
• /
• 2009

The purpose of this paper is the study on the architectural characteristics revived from the roman architecture, focused on the early renaissance architecture building. The results of study are as follow: 1. The composition system of Domus which is formed of urban house in the Roman period is presented by spatial arrangement of palace architecture centering around atrium in the Renaissance period. Thus plan type of Domus is used by atrium from which is composed of peristyle from the palace and villa in the Renaissance period. 2. The circular temple in the Roman period is composed of element such as podium, stair, peristyle centering around the basic circular plan. Bramante planed to revive above elements for the Tempietto to concept from the circular temple in the Roman period. 3. The triumphal arch in the Roman period is strong monument to the independent building in the city, but thus arch is used of church facade as the important example which is composed with building elevation in the Renaissance period. 4. The composition system and element of Roman temple which is planned to rectangular plan is composed of high podium, stair, portico, prostyle and pediment. The facade plan of church is used by the partial elements and total elements perfectly from the temple in the Roman period. 5. The linearly successive and repetitive composition which is composition system and element of aqueduct arches of same dimension shows to the palace facade, arcade for gallery space and side elevation plan of S.Fracesco church. 6. Such as background of Colloseum, Rucellai palace can be called good example which is created by the new architectural form to the creative starting point from the classical architecture from.

• 건축역사연구
• /
• 제5권1호
• /
• pp.73-86
• /
• 1996

This study is to analyze the geometrical composition system for the plan of S. Pietro by Michelangelo. In the result of study, the plan is based on the geometrical elements of circle square cross, and shaped to symbolize the Universe which consists of the Heaven the Earth the Man. The plan is constituted of the conception of composition into hierarchy and repetition intersecting 45 degree the same sized square with inscribed square in a circle. Such the geometrical composition system can be found out a large number of example to the geometrical composition of architecture and city planning from Vitruvius to Bramante and Da Vinci. This plan is disposed in balance as the regularly proportional system of 1:1, 1:2, 1:3, which is formed the principal space. And the interior space is constituted of the organic space system, expanding to the direction of horizontal, vertical(ascension), development for primary space and secondary space with center in the geometric composition system of altar.

• Restorative Dentistry and Endodontics
• /
• 제30권4호
• /
• pp.327-334
• /
• 2005

본 연구에서는 ProFile로 근관형성 시 anticurvature filing 방법의 영향을 평가하고자 하였다 변형된 Bramante 법을 이용해 36개의 레진 블록을 치근단으로부터 8mm부위와 근관의 최대 만곡 부위에서 절단한 후 재조립하였다. 근관형성의 동작에 따라 anticurvature filing motion, circumferential filing motion, straight up-and-down motion의 3가지 실험군으로 분류한 다음 ProFile로 근관을 형성하였으며, 술 전$\cdot$후의 단면을 stereomicroscope로 촬영, 저장하고 중첩하여 근관 단면의 변화와 근관의 중심 이동률을 비교 평가하였다. 모든 위치에서 단면적 변화량, 만곡 내측으로의 형성량과 중심 이동률은 세 군간에 유의한 차이가 없었으며, 만곡 외측으로의 형성량은 치근단으로부터 8mm 부위에서 anticurvature filing motion, circumferential filing motion, straight up-and-down motion의 순으로 많았으나, 근관의 최대 만곡 부위에서는 차이가 없었다 이상의 결과에서 만곡 근관의 위험 부위에서 ProFile로 근관형성 시 anticurvature filing motion의 영향은 다른 motion과 비교해 볼 때 유의할 만한 차이가 없는 것으로 생각된다.

• 한국실내디자인학회논문집
• /
• 제15권4호
• /
• pp.12-20
• /
• 2006

The purpose of this study is to analyze the influence of theory of Cusanus on the Leonardo's theory of the centralized plan. In Renaissance, Neo-Platonism was so popular that is wat influenced nearly every architecture, literature, painting, sculpture and so on. Theory of Neo-Platonism was so various that every Neo-Platonist had his own theory. Among them, Cusanus focused his theory on rationality, mathematics rather than the medieval symbolism and studied the relationship between the God and men. In the same age, Leonardo da Vinci studied the planning system influenced on many architects works, including Bramante s. His planning system came not from symbolic appearance but from his scientific and rational researches as the theory of Cusanus. This study is to compare Cusanus Neo-Platonism theory and artistie view shown in Leonardo da Vinci's memorandum and drawing and to ascertain the influential relationship, abstracting the common things, and to substitute the characteristics that are seen in his centralized space sketch, abstracting the key words. The study on Cusanus will take advantage of the issued books and will requote Cusanus's copied ones.

• Restorative Dentistry and Endodontics
• /
• 제27권6호
• /
• pp.612-621
• /
• 2002

The purpose of this study was to compare the histomorphological change of curved root canal preparation using GT rotary File, Profile .04 taper and stainless steel K-file. 45 mesial canals(over 20 degree) of extracted human mandibular first molars were mounted in resin using a modified Bramante muffle system and divided into three groups. The roots were cross-sectioned at 2.5mm 5mm and 8mm levels from apical foramen. Tracings of the canals were made from preinstrumentation pictures of the cross section. The canals were prepared using a step-back technique with stainless steel K file(group 1), Profile .04 taper rotary file(group 2) and GT rotary file(group 3). Tracings of the prepared canals were made from postinstrumentation picture. Canal centring ratio. amount of transportation, area of dentin removed and shape of canal were measured and statistically were evaluated with Student-Newman-Keuls test using Sigma Stat(Jandel Scientific Software, USA). The results were as followings : 1 Amount of transportation of group 2 was the lowest at apical part, but there was no statistical difference. The direction of transportation was the outside of curvature at apical part. 2. Centering ratio at the apical part of group 1 was the highest, and there was statistical differences between apical and middle part, apical and coronal part(p＜0.05). Centering ratio at the middle part of group 3 was the lowest, and there was statistical difference between apical and middle part(p＜0.05). Centering ratio of group 2 was the lowest at apical part, but there was no statistical difference. 3. Amount of dentin removed of group 1 was the highest at coronal, middle and apical part among three groups, and there was statistical difference(p＜0.05). 4. The majority of the cross-sectioned canal shape after instrumentation were irregular at coronal, middle and apical part. But there are more number of round shaped canals at group 3 than other group.

• Restorative Dentistry and Endodontics
• /
• 제40권3호
• /
• pp.195-201
• /
• 2015

Objectives: The use of chitosan nanoparticles (CNPs) in endodontics is of interest due to their antibiofilm properties. This study was to investigate the ability of bioactive CNPs to remove the smear layer and inhibit bacterial recolonization on dentin. Materials and Methods: One hundred bovine dentin sections were divided into five groups (n = 20 per group) according to the treatment. The irrigating solutions used were 2.5% sodium hypochlorite (NaOCl) for 20 min, 17% ethylenediaminetetraacetic acid (EDTA) for 3 min and 1.29 mg/mL CNPs for 3 min. The samples were irrigated with either distilled water (control), NaOCl, NaOCl-EDTA, NaOCl-EDTA-CNPs or NaOCl-CNPs. After the treatment, half of the samples (n = 50) were used to assess the chelating effect of the solutions using portable scanning electronic microscopy, while the other half (n = 50) were infected intra-orally to examine the post-treatment bacterial biofilm forming capacity. The biovolume and cellular viability of the biofilms were analysed under confocal laser scanning microscopy. The Kappa test was performed for examiner calibration, and the non-parametric Kruskal-Wallis and Dunn tests (p < 0.05) were used for comparisons among the groups. Results: The smear layer was significantly reduced in all of the groups except the control and NaOCl groups (p < 0.05). The CNPs-treated samples were able to resist biofilm formation significantly better than other treatment groups (p < 0.05). Conclusions: CNPs could be used as a final irrigant during root canal treatment with the dual benefit of removing the smear layer and inhibiting bacterial recolonization on root dentin.

• Restorative Dentistry and Endodontics
• /
• 제26권1호
• /
• pp.9-15
• /
• 2001

통상적인 근관형성 과정에서 근관형태의 직선화 경향을 발견할 수 있으며, 그 결과 만곡이 심한 근관에서 이상적인 근관형태를 얻기가 어렵다. 이를 극복하기 위한 많은 기구들과 근관 성형법들이 개선되고 소개되었다. 본 연구에서는 최근에 개발된 직사각형의 단면을 가지는 stainless steel file인 RT file과 Flex-R file, K-file을 이용하여 만곡근관 형성 후 최종 근관형태를 비교하여 각 file을 평가하고자 한다. 본 실험은 Bramante등의 방법을 변형하여 술 전의 근관형태와 술 후의 근관형태를 비교하였다. Schneider의 방법을 변형하여 3차원적 만곡을 계산하여 12도에서 36도 이내에 만곡도를 가진 근관을 선택하였다. 49개의 발거된 상악대구치 협측근관이나 하악대구치 근심근관을 3개의 군으로 나누고 레진과 플라스틱으로 제작된 mold에 투명한 교정용 레진으로 매몰하였다. 근첨에서 2.5, 5, 8mm지점에서 절단하여 각 mold에서 재조립한 후 다음과 같이 근관형성을 시행하였다. 제 1군은 SS K-file을 이용하여 step-back 방법 ; 제 2군은 Flex-R file을 이용하여 balanced force 방법 ; 제 3군은 RT file을 이용하여 step-back 방법으로 근관 형성하였다. 술 전과 술 후에 각 시편들을 체현미경으로 사진촬영하여 근관 중심 위치 이동률, 근관형성으로 삭제된 상아질양, 근관형성 후 모양을 Sigma scan/ image software program으로 계산하고 One way ANOVA로 통계적 유의성을 검증하여 다음과 같은 결론을 얻었다. 1. RT file이 치근단에서 K-file보다 유의성 있게 근관의 중심을 유지하는 것으로 보였다. 치아 중앙부에서는 RT file과 Flex-R file이 K-file에 대해 유의성 있게 우수한 것으로 나타났다. 2. 근관형성 후 삭제된 상아질양에서는 치근단에서 RT file이 적게 나왔으나 유의성은 없었다. 3. 근관형성 후 절단면 모양은 원형, 타원형, 불규칙한 형태들이 다양하게 나타났고 각 군간에 유의성 있는 차이는 없었다.

• Restorative Dentistry and Endodontics
• /
• 제25권1호
• /
• pp.133-143
• /
• 2000

목 적: 통상적인 근관성형 과정에서 근관형태의 직선화 경향을 발견할수 있으며 그 결과 만곡이 심한 근관에서 이상적인 근관 형태를 얻기가 어려움으로 인해 이를 극복하기 위한 많은 기구들과 근관 성형법들이 개선되었고 소개되었다. 본 연구에서는 수통형 Stainless Steel K-file, Niti 엔진 구동형 Profile .04와 Quantec LX file를 이용하여 만곡 근관의 성형 후 최종 근관 형태를 비교하고 평가하고자 한다. 방 법: 본 실험은 Bramante등의 방법을 변형하여 술 전의 근관 형태와 술 후의 근관 형태를 비교하였다. Schneider의 방법에 따라 $12^{\circ}$에서 $68^{\circ}$ 이내에 만독도를 가진 45개의 발거된 상하악 대구치의 근심근관들을 선택하여 15개씩 3개의 군으로 나누고 알루미늄으로 제작된 mold에 투명한 교정용 레진으로 매몰하였다. 근첨에서 2.5, 5, 8mm 지점에서 절단하고 각 mold에 재조립한 후 다음과 같이 근관 성형을 시행하였다. 제 1 군은 SS K-file를 이용하여 Step-back 방법; 제 2 군은 NiTi 엔진 구동형인 Profile .04 ; 제 3 군은 NiTi 엔진 구동형인 Quantec LX file로 근관 성형하였다. 술 전과 술 후에, 각 시편들을 입체 현미경으로 사진 촬영하여 근관 중심 위치 이동률, 근관성형 후 면적과 모양, 잔존 상아질의 최 소 두께를 Sigma scan / image software program으로 계산하고 One way ANOVA로 통계적 유의성을 검증하였다. 결 론: 1. Profile .04와 Quantec LX는 SS K-file보다 근관성형시 근관의 본 형태를 유지하는 경향이 있었으나 통계적으로 유의성이 없었다(p>0.05). 2. 근관 성형 후 면적은 Profile .04 엔진 구동형 NiTi file를 이용한 군이 다른 군과 비해 가장 적었으나 통계적으로 유의성이 없었다(p>0.05). 2. 모든 방법들은 같은 부위에서 같은 방향으로 전이되는 양상을 보였다. 즉, 근단부에서는 바깥쪽으로, 중앙부에서는 안쪽으로 전이하려는 경향이 있었다. 그러나, 치관부에는 그러한 법칙이 적용되지 않아 전이되는 양상이 안쪽이나 바깥쪽으로 구별되지 않게 일어났다. 3. 술 후에 근관의 모양은 원형, 타원형, 불균일한 형태들이 다양하게 나타났지만, Profile .04와 Quantec LX를 사용했을 때 주로 원형 형태의 근관을 보여주었으며 Stainless Steel K-file은 타원형이나 불균일한 근관 형태를 보였다.

• Restorative Dentistry and Endodontics
• /
• 제29권5호
• /
• pp.446-453
• /
• 2004

하악 대구치 근심치근의 danger zone에서 수종의 전동 니켈-티타늄 파일의 근관성형력을 근관성형 전후 치질 두께의 변화를 측정하여 평가하고자 하였다. 기구에 따라 총 40개의 하악 대구치를 10개씩 $Profile^{\circledR}$, GT Rotary file, Quantec 및 ProTaper 4개 군으로 나누고 각 치아당 2개의 근관을 straight up-and-down과 anticurvature 군으로 나누어 근단부 근관을 모두 30번 크기로 일정하게 확대하였다. 수정된 Bramante법을 사용하였으며 술전 및 술후의 근관 상아질 두께를 치수저 하방 1, 3 및 5 mm지점에서 측정, 이원변량분석법으로 통계분석하였다. 모든 군의 danger zone과 safe zone에서의 straight up-and-down 동작과 anticurvature 동작 사이에는 치근상아질 두께변화에 현저한 차이를 나타내지 않았다 (p > 0.05). ProTaper는 danger zone과 safe zone 모두에서 다른 기구에 비해 많은 량의 근관상아질 삭제를 보였으며 특히 분지부 3 mm 수준에서 현저하였다(p < 0.05).

• Restorative Dentistry and Endodontics
• /
• 제24권2호
• /
• pp.337-345
• /
• 1999

The purpose of this study was to compare the shape of root canal after instrumentation with some engine driven NiTi files. Thirty narrow and curved canals(15-35 degree) of mesial canals of extracted human mandibular first molars were divided into three groups. Group 1: After radicular access with Gates Glidden drill, apical shaping using step back method with Flexo file Group 2: After radicular access with Gates Glidden drill, apical shaping with Profile .04 Group 3: Canal shaping with GT file and Profile .04. Using modified Bramante technique, the root was sectioned at 2 mm from apical foramen, height of curvature, 2 mm from canal orifice. Canal centering ratio, amount of transport, amount of dentin removed, shape of canal were measured and statistical analysis is done using SPSS Program V 7.5. The results were as follows: 1. Canal centering ratio of group 3 was the lowest at coronal part, but there was no statistical difference. Centering ratio of group 2 was the lowest at curve part, and there was statistical difference between group 1(P<0.05). Centering ratio of group 2 was the lowest at apical part, but there was no statistic difference. 2. Amount of transport of group 3 was the lowest at coronal part, but there was no statistical difference. Amount of transport of group 2 was the lowest at curve part, and there was statistical difference between group 1(P<0.05). Amount of transport of group 3 was the lowest at apical part, and there was statistical difference between group 1 and group 2, group 1 and group 3(P<0.05). 3. Amount of dentin removed of group 3 was the lowest at coronal part, bur there was no statistical difference. Amount of dentin removed of group 2 was the lowest at curve part, but there was no statistical difference. Amount of dentin removed or group 2 was the lowest at apical part, and there was statistical difference between group 1 and group 2, group 1 and group 3(P<0.05). 4. The shape of the canals after instrumentation varied among the groups. The majority of canals at coronal and curve part for group 1 were round in shape(7 in 10), those at apical part were oval(8 in 10). The majority of canals at coronal part for group 2 were round in shape(7 in 10) and there was no difference in the number of shape at other part. There was no difference in the number of shape at every part for group 3. As above results, NiTi rotary instrumentation showed a trend to remain more centered in the canal than SS file instrumentation. At using NiTi file, coronal shaping with Gates Glidden drill was not statistically different from shaping with GT file. But shaping with GT file showed tapered canals, so it may be said that shaping with GT file is a safe and valuable instrumentation method.