• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1943-1952
• /
• 2011

Rail vehicle brakes partly or completely transform the kinetic energy of moving vehicles into other forms of energy, in order to reduce the speed, and if necessary to bring them to a halt. To fulfil these requirements, the effect of a certain brake force is necessary and especially it is considered that the brake force is a important device to rail vehicles as a mass transit. The brake distance is a criterion for measuring brake force. The brake force is measured via dozens of brake distance test before its service operation. The brake distance is influenced by cars and rail conditions; weight of cars, speed on the verge of braking, temperature of brake disk and condition of the upper side of rail, etc. Therefore we will study how the these factors impact with the brake distance via a real test results.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.5
• /
• pp.174-179
• /
• 2007

The transient brake time or distance is one of very important factors to guess the vehicle speed to inspect an automobile accident. But, it is usual that the vehicle speed is estimated by using only skid mark without considering the transient brake distance. Deceleration and the friction coefficients of tire and road surface play an important role in calculating the brake distance. In this paper, a scheme is presented to estimate more accurate automobile speed. The scheme contains the effect of the transient brake distance on the speed. Experiment was carried out on the asphalt, unpacked road to get relationships between the speeds and the skid mark distances, and to get the transient brake time. The experimental results were utilized to construct the equation to approximate more realistic vehicle speeds.

• Journal of the Korean Society for Railway
• /
• v.7 no.2
• /
• pp.120-124
• /
• 2004

Computer aided simulation is an essential part in planning, design, and operation of railway systems. To determine the adequate performance and specification of railway system, it is necessary to calculate train performances such as distance, speed, power during train's running. This paper presents result of train performance simulation using the program that developed for Korea high speed train. To verify result of simulation, we have compared that with experiment data.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.1
• /
• pp.21-30
• /
• 2017

The surface temperature of disc brakes varies during braking, which can affect the friction and wear behavior of braking systems. In order to develop an efficient braking system, the friction and wear behaviors of brake materials need to be clearly understood. In this work, the friction and wear behavior of the C/C-SiC-Cu composite and the Al/SiC composite, which are used in disc braking systems, were investigated. Both the surface temperature and contact pressure were studied. A pin-on-reciprocating tribotester was used for this purpose, in order to control temperature and load. Results showed that the friction varied significantly with temperature and sliding distance. It was found that a transfer layer of compacted wear debris formed on the wear track of the two materials. These layers caused the surface roughness of the wear track to increase. The outcome of this work is expected to serve as a basis for the development of braking systems under various operating conditions.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.666-670
• /
• 2011

ATS(Automatic Train Stop)s are is effected by track environment, signal distance and train braking distance. So onboard signaling systems such as ATP(Automatic Train Protection) are installed on conventional lines by some train operation companies. With the mixed signalling, the onboard signaling system is overlaid on a conventional line with ATS, it is possible to run the line with conventional trains and ATP trains and to use the advantages of ATP(higher speed or more trains on the line). This paper includes guidelines a mixed signalling(ETCS and ATS) system architecture, operation concepts and infill balise installation.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2004.11a
• /
• pp.241-244
• /
• 2004

In this paper wear ratio, hardness and microstructure were experimented for study of friction wear characteristic of automotive disk brake considering running distance. In this work.4 specimens were employed for test of the friction&wear tester as a function running distance. Despite the fact that brakes must operate under a variety of environmental conditions. most research has worked in laboratory with ideal condition.

• International Journal of Internet, Broadcasting and Communication
• /
• v.9 no.1
• /
• pp.18-23
• /
• 2017

In 2015, 100-car pileup was happened because the safe distance from the car in front did not be kept due to much fog at YoungJong Bridge in South Korea. This is why the road would be benumbed with cold weather in winter. For this weather condition, if the driver of the car in front changed the lane suddenly or suddenly slammed on the brake in fog or freezing area, the braking distance of the real car has to be 2 or 3 times longer than usual. In this paper, we have simulated the function that warns and notice about the fog area or the freezing one in the road using Arduino sensors and Beacon. Also we propose the intelligent traffic system to protect the accidents in winter.

• Journal of Auto-vehicle Safety Association
• /
• v.11 no.3
• /
• pp.7-12
• /
• 2019

AEB (Autonomous Emergency Braking system), a system in which vehicles automatically recognize forward objects or pedestrians and actively brake when forward collisions are expected, has been mandated by NHTSA (National Highway Traffic Safety Administration) and IIHS (Insurance Institute for Highway Safety) for all vehicles sell in the United States since 2022, and AEB research is also actively underway in korea. In this study, it can be confirmed that the passenger injury is reduced according to the AEB detection distance when it is assumed that the AEB is mounted in the actual event generated from KIDAS (Korea New Car Assessment Program) data through various analysis programs.

• Journal of the Korean Society for Railway
• /
• v.15 no.6
• /
• pp.609-615
• /
• 2012

TPS (Train Performance Simulation) based on ATO (Automatic Train Operation) is required for driverless LRT (Light Rail Transit) operation plan instead of typical TPS based on driver operation. In this paper, new TPS model using ATO pattern is proposed and compared with the automatic train operation result in a test line of Seoul Metro Line 6 and in a whole line of Busan-Gimhae LRT. The actual ATO pattern can be very accurately simulated by new TPS model with the introduction of 4 parameters such as commercial braking rate, jerk, station stop profile and grade converted distance. The commercial scheduled time for driverless automatic train operation can be proposed to have "Fast" mode TPS trip time plus 3 seconds/km margin recommended by Korean standard LRT specification in this paper.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.5
• /
• pp.115-122
• /
• 2012

Automobile collision analysis is composed of various shapes, and the speed variation working to the vehicle during collision are utilized as a very important factor in evaluating the degree of vehicle collision or passenger safety. So, the method of analyzing result values on the speed variation utilizing collision analysis program become necessary. This study utilized PC-Crash program in order to compare actual values and analyzed values of braking distance with the friction coefficient of road surface according to vehicle velocity. As a result, the smaller friction coefficient found to be larger error, and the maximum error range of collision velocity in case of each different vehicles (MATIZ, SONATA, or BUS) at the intersection showed 1.2%, 1.8%, 3.1% according to the difference of vehicle weight. Moreover, an accidental fall at IN-CHEON large bridge in order to reappear was verified with practicing simulation which has a slight error.