• 한국정밀공학회지
• /
• 제17권5호
• /
• pp.100-107
• /
• 2000

The hydraulic couplings have been widely used in industries, automobile, and power-station drives including ships. A mathematical analysis by which the design and application of hydraulic couplings are made is used in conventional design formulae and general roto-dynamic theories. The fluid flow of hydraulic couplings can be considered to have two component, one circumferentially about the coupling axis, and the other passing fluid from the pump to the turbine in the plane of the coupling axis. Tests have been carried out on the full-scale production coupling. The performance test consists of taking measurement of torque of the fluid coupling for three different amount of working fluid inside with various loads to the output shaft. The purpose of this research is to construct the experimental test equipments and to establish a series of performance test for the domestically developed hydraulic couplings, and to obtain experimental results which can be used to improve the performance of the hydraulic coupling and to solve the practical problems confronted in operation.

• 한국공작기계학회논문집
• /
• 제18권2호
• /
• pp.201-206
• /
• 2009

This study investigates fatigue life and possibility damaged at disk brake of automobile by the simulation of fatigue analysis. Among nonconstant fatigue loads, the case of 'SAE Bracket History' which is the severest at the variation of load tends to be most unstable. The case of 'Sample History' which becomes slower at the variation of load tends to be most stable. The value of maximum relative damage in case of 'SAE Bracket History' is occurred near the average stress '0' and this case can be shown to have the possibility to affect more damage than another case. As the result of this study is applied to automobile parts with non constant loads, durability can be improved during drive by preventing any damage.

• 한국항행학회논문지
• /
• 제14권5호
• /
• pp.760-766
• /
• 2010

본 논문에서는 유압 비례 제어 밸브로 구동되는 유압모터 부하계에 존재하는 정지마찰토크와 점성마찰토크를 해석하였다. 이에 기초 실험으로 유압시스템의 에너지인 압력과 유량에 대한 특성실험을 수행하였고, 공압브레이크 시스템을 이용하여 브레이크 압력의 변화를 인가하여 마찰토크의 변화를 실험하였다. 비선형마찰과 선형마찰에 대한 해석은 유압 시스템의 마찰특성에 대하여 수행하였다.

• 자동차안전학회지
• /
• 제5권1호
• /
• pp.50-55
• /
• 2013

When it comes to commercial vehicles, their unique characteristics - center of gravity, size, weight distribution - make them particularly vulnerable to rollover. On top of that, conventional heavy vehicle brake exhibits longer actuation delays caused in part by long air lines from brake pedal to tires. This paper describes rollover prevention algorithm that copes with the characteristics of commercial vehicles. In regard of compensating for high actuating delay, predicted rollover index with short preview time has been designed. Moreover, predicted rollover index with longer preview time has been calculated by using road curvature information based on environment information. When rollover index becomes larger than specific threshold value, desired braking force is calculated in order to decrease the index. At the same time, braking force is distributed to each tire to make yaw rate track desired value.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.296-297
• /
• 2011

Many applications involving induction motors that are controlled using variable frequency drives require the ability to stop quickly. These applications include emergency stops, quick stopping of fans, centrifuges, presses, etc. The technique that is widely accepted in the industry for achieving quick stopping makes use of brake resistors in series with a power semiconductor switch. The switch-resistor combination (brake-unit) is applied across the dc bus. The fastest decelerating time achievable depends on the size of the resistors and the switch employed. In this paper, the authors propose a novel method of achieving quick stopping times without the use of any brake-unit. Experimental test results with and without this method on a large inertia motor-load combination show that the proposed stopping method is able to reduce the stopping time significantly compared to normal decelerated stop without the need for a braking unit.

• 산업경영시스템학회지
• /
• 제30권1호
• /
• pp.41-47
• /
• 2007

Mahalanobis Taguchi-System (MTS) is a pattern information technology, which has been used in different diagnostic ap plications to make quantitative decisions by constructing a multivariate system using data analytic methods without any as sumption regarding statistical distribution. MTS performs Taguchi's fractional factorial design based on the Mahalanobis distance as a performance metric In this work, MTS used for analyzing automotive brake feeling system, which measured as a brake feel index (BFI) from 9 attributes. The automobile which has a good BFI score treated as a normal group for constructing Mahalanobis space. The results of this research show that two attributes (Pre load & Max deceleration) have a minus gain value and can be removed from further analysis. The difference of MD value between using all 9 attributes and just using significant attribute compared.

• 한국기계연구소 소보
• /
• 통권20호
• /
• pp.27-32
• /
• 1990

A counter balance valve is used as one part of hydraulic motor brake system. The function of this valve is to protect over-run or free falling of inertia load. But occasionally the brake system with counter balance valve makes some undesirable problems such as pressure surges or vibrations. In this study, for the purpose of easy estimation about dynamic chrcteristics of hydraulic system including counter balance valve, precise formulation describing fluid dynamics and valve dynamics under various boundary conditions were made. dynamic caracteristics were analysed by numerical intergration using Runge-Kutta method, because the equations in this circuit with counter balance valve contain various nonlinear terms. So the analyzing method developed in this study enabled very easy estimating the relation between the performance of counter balance valve and various physical parameters related to the valve.

• 한국항공우주학회지
• /
• 제43권11호
• /
• pp.963-970
• /
• 2015

본 연구에서는 압전유압펌프의 챔버부, 체크밸브, 부하, 펌프구동제어기 등 유압펌프 전체 구성품의 해석 모델링을 통하여 브레이크용 소형 압전유압펌프의 가압 동특성을 해석하였다. 가압 동특성을 해석하기 위해 먼저 적층형 압전작동기가 챔버내에서 압력을 형성하는 과정을 모델링하였다. 체크밸브 개도에 따른 유량계수 식을 얻기 위해, 유한요소코드 해석을 통해 체크밸브 압력분포 및 유동결과를 얻은 후 체크밸브 유량계수식을 커브 피팅으로 유도하였다. 또한 부하압력을 피드백 받아 작동기 입력전압을 제어하여 부하압력이 입력명령 압력을 잘 추종하도록 펌프구동제어기를 설계하였다. 시뮬레이션 결과 브레이크 작동에 필요한 정상작동압력까지 도달하는데 걸리는 시간은 약 0.03ms 정도이다. 본 연구에서 얻어진 해석 시뮬레이션 결과는 실제 실험결과와 비교를 통해 타당성을 검증하였다.

• 동력기계공학회지
• /
• 제16권2호
• /
• pp.5-10
• /
• 2012

The parking brake is one of the essential units embedded in track driving motor for forward and backward motion of an excavator. It is composed of multi-friction discs. When the hydraulic motor stops, the multi-friction discs closely stick to the facing discs by acting of multi-spring forces. So, the friction forces generate the braking force by compressing the cylinder barrel of hydraulic motor. In this study, we combined the multi-friction discs to two kinds of spring which have different spring force, and the maximum torque measured at the rotational starting point of hydraulic motor through gradually increasing the rotational torque of load side hydraulic motor by use of 1 and 2 sheets of friction plates. And, under this experimental condition, the maximum coefficient of static friction and the characteristics of paper friction sheet were analyzed. The obtained experimental results will be applied to the design of parking brake system for producing large size excavator in the 85-ton weight class.

• 대한기계학회논문집A
• /
• 제24권3호
• /
• pp.593-602
• /
• 2000

The shape optimization is performed to minimize the judder of ventilated disc brake rotor that is induced by the thermal deformation of the disc. A three-dimensional finite element is developed to analyze the coupled system of temperature and displacement field, and the thermal conductivity and mechanical stiffness matrices are simultaneously taken into account. To reduce computing time, an equivalent heat transfer rate is introduced approximating the heat transfer rate on the disc surface. A deformation factor is introduced to describe the thermal deformation causing the judder. The deformation factor is chosen as an objective function in the optimization process. Consequently an optimum design is then performed minimizing the deformation factor with the design variables of the shape of the disc. The optimum design procedure presented in this study is proven to be an effective method of minimizing the judder, and it reduces the thermal deformation by 23% of the initial geometry.