Journal of the Korean Society for Aeronautical & Space Sciences (한국항공우주학회지)

The Korean Society for Aeronautical and Space Sciences (한국항공우주학회)
권호 표지
DOI QR코드

DOI QR Code

On the Pressurization Characteristics of Small Piezoelectric Hydraulic Pump for Brake System

브레이크용 소형 압전유압펌프 가압 동특성 해석

  • Jeong, Min-Ji (Department of Aerospace and Mechanical Engineering, Graduate School at KAU) ;
  • Hwang, Jai-Hyuk (Department of Aerospace and Mechanical Engineering, Korea Aerospace University) ;
  • Bae, Jae-Sung (Department of Aerospace and Mechanical Engineering, Korea Aerospace University) ;
  • Kwon, Jun-Yong (The 7th Research and Development Institute, ADD)
  • Received : 2015.09.15
  • Accepted : 2015.10.06
  • Published : 2015.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, the pressurization characteristics of the small piezoelectric hydraulic pump for a brake system has been analyzed through modeling the full hydraulic pump components; the pump chamber, check valve, pump load, pump drive controller etc. To analyze the pressurization characteristics, the process of charging pressure in the chamber with stacked-layer piezoelectric actuator were firstly modeled. Secondly, the flow coefficient of the check valve in terms of valve opening has been calculated after computational fluid dynamics analysis, such as the pressure distribution around check valve and the flow rate, was conducted. Also the pump driving controller, which controls the input voltage to the actuator, was designed to make the load pressure follow the input pressure command. The simulation results find that it takes about 0.03ms to reach the operating load pressure required for the braking system. The simulation result was also verified through comparison to the result of the pump performance test.

본 연구에서는 압전유압펌프의 챔버부, 체크밸브, 부하, 펌프구동제어기 등 유압펌프 전체 구성품의 해석 모델링을 통하여 브레이크용 소형 압전유압펌프의 가압 동특성을 해석하였다. 가압 동특성을 해석하기 위해 먼저 적층형 압전작동기가 챔버내에서 압력을 형성하는 과정을 모델링하였다. 체크밸브 개도에 따른 유량계수 식을 얻기 위해, 유한요소코드 해석을 통해 체크밸브 압력분포 및 유동결과를 얻은 후 체크밸브 유량계수식을 커브 피팅으로 유도하였다. 또한 부하압력을 피드백 받아 작동기 입력전압을 제어하여 부하압력이 입력명령 압력을 잘 추종하도록 펌프구동제어기를 설계하였다. 시뮬레이션 결과 브레이크 작동에 필요한 정상작동압력까지 도달하는데 걸리는 시간은 약 0.03ms 정도이다. 본 연구에서 얻어진 해석 시뮬레이션 결과는 실제 실험결과와 비교를 통해 타당성을 검증하였다.

Keywords

References

  1. H. K. Ma, B. R. Hou, H. Y. Wu, C. Y. Lin, J. J. Gao, M. C. Kou, "Development and application of a diaphragm micro-pump with piezoelectric device," Journal of Microsystem Technologies, Vol. 14, No. 7, 2008, pp.1001-1007. https://doi.org/10.1007/s00542-007-0462-6
  2. Junwu Kan, Zhigang Yang, Taijiang Peng, Guangming Cheng, Boda Wu, "Design and test of a high-performance piezoelectric micropump for drug delivery," Journal of Sensors and Actuators A: Physical, Vol. 121, No. 1, 2005, pp.156-161. https://doi.org/10.1016/j.sna.2004.12.002
  3. John P Larson, Marcelo J Dapino, "Reliable, high-frequency miniature valves for smart material electrohydraulic actuators," Journal of Intelligent Material Systems and Structures, Vol. 23, No. 7, 2012, pp.805-813. https://doi.org/10.1177/1045389X12438628
  4. Young Bog Ham, Sung Jin. Oh, Woo Suk Seo, Jung Ho Park, So Nam Yun, "A Piezoelectric Micropump for Microscale Pumping Systems," Journal of Drive and Control , Vol. 36, No. 2, 2009, pp.17-25.
  5. Daniel J. Laser, Juan G. Santiago, "A Review of Micropumps," Journal of Micromechanics and Microengineering, Vol. 14, No. 6, 2004, pp.35-64. https://doi.org/10.1088/0960-1317/14/6/R01
  6. Brian D. Iverson, Suresh V. Garimella, "Recent Advances in Microscale Pumping Technologies: a Review and Evaluation," Journal of Microfluidics and Nanofluidics, Vol. 5, No. 2, 2008, pp.145-174. https://doi.org/10.1007/s10404-008-0266-8
  7. Anirban Chaudhuri, Norman Wereley, "Compact hybrid electrohydraulic actuators using smart materials : A review," Journal of Intelligent Material Systems and Structures, Vol. 23, No. 6, 2012, pp.597-634. https://doi.org/10.1177/1045389X11418862
  8. Yong-Hwi Joo, Jai-Hyuk Hwang, Jae-Sung Bae, Ji-Youn Yang, Jun-Yong Kwon, "The Design on the spring Sheet type check valve of smart material hydraulic pump," The Society for Aerospace System Engineering, Fall Conference Paper #85, 2014.
  9. Jonghoon Lee, Jaihyuk Hwang, Jiyoun Yang, Yonghwi Joo, Jaesung Bae, Junyong Kwon, "Design of the Compound Smart Material Pump for Brake System of Small․ Medium Size UAV," Journal of The Society for Aerospace System Engineering, Vol. 9, No. 3, 2015, pp.1-7.
  10. Jaihyuk Hwang, Jonghoon Lee, Jaeup Hwang, Jaesung Bae, Junyong Kwon, "Conceptual Design of Compound Smart Material Pump with Sequential Operatioon of Fluid Displacement-Force," The Society for Aerospace System Engineering, Spring Conference Paper #95, 2014.
  11. Yong-Hwi Joo, Jai-Hyuk Hwang, Ji-Youn Yang, Jae-Sung Bae, Jun-Yong Kwon, "On the performance test of the Piezoelectric-Hydraulic Pump," J. of The Korean Society for Aeronautical and Space Sciences, Vol. 43, No.9, 2015, pp. 706-711. https://doi.org/10.5139/JKSAS.2015.43.8.706
  12. www.matweb.com.
  13. M. Galal Rabie, "Fluid Power Enginering," 1st Ed., McGrawHill, 2012, pp.25-85.

Cited by

  1. Effect of the Design Parameters Change on the Hybrid Dynamometer Braking Performance vol.44, pp.11, 2016, https://doi.org/10.5139/JKSAS.2016.44.11.981