• 한국해양공학회지
• /
• 제24권6호
• /
• pp.34-40
• /
• 2010

Bragg reflection of nonlinear waves is simulated by a 2D fully nonlinear numerical wave tank (NWT). The developed NWT was based on the Boundary Element Method (BEM) with potential theory and the mixed Eulerian-Lagrangian (MEL) time marching scheme with Runge-Kutta 4th-order time integration. A spatial variation of wave elevations and their Fourier amplitudes of each component are compared to investigate the effect of sea bottom ripples and their relative heights. The incident waves over an undulated sea bottom are partially reflected and changed to partial standing waves due to Bragg reflection. The present results are verified with linear calculations and experimental data. It is found that the 1st-order wave component is mainly affected by Bragg reflection and its spatial modulation is significant in front of the bottom ripples.

• Current Optics and Photonics
• /
• 제3권5호
• /
• pp.401-407
• /
• 2019

Polymeric optical waveguide devices with Bragg gratings have been investigated, for implementing tunable lasers and wavelength filters used in wavelength-division-multiplexed optical communication systems. Owing to the excellent thermo-optic effect of these polymers, wavelength tuning is possible over a wide range, which is difficult to achieve using other optical materials. In this study the phase-mask technology, which has advantages over the conventional interferometeric method, was introduced to facilitate the fabrication of Bragg gratings in polymeric optical waveguide devices. An optical setup capable of fabricating multiple Bragg gratings simultaneously on a 4-inch silicon wafer was constructed, using a 442-nm laser and phase mask. During fabrication, some of the diffracted light in the phase mask was totally reflected inside the mask, which affected the quality of the Bragg grating adversely, so experiments were conducted to solve this issue. To verify grating uniformity, two types of wavelength-filtering devices were fabricated using the phase-mask lithography, and their reflection and transmission spectra were measured. From the results, we confirmed that the phase-mask method provides good uniformity, and may be applied for mass production of polymer Bragg-grating waveguide devices.

• 한국세라믹학회지
• /
• 제38권11호
• /
• pp.980-986
• /
• 2001

5.2GHz 중심 주파수를 갖는 Bragg reflector형 FBAR를 제작하여 주파수 응답 특성을 측정하고, 공진기 구조에서 각 층의 탄성 손실(acoustic loss)을 고려한 주파수 응답의 수치적 계산을 통해서 그 특성을 분석하였다. W과 $SiO_2$쌍을 선택하여 RF sputtering법으로 총 9층의 Bragg reflector를 제작하였고, 공진기의 압전층으로 pulsed dc 전원에 의한 sputtering법으로 AlN과 Al 전극을 증착하여 제작하였다. 제작된 공진기의 반사손실( $S_{11}$)은 중심주파수 5.38GHz에서 12dB이었고 직렬 공진 주파수( $f_{s}$)는 5.376GHz, 병렬 공진 주파수 ( $f_{p}$)는 5.3865GHz로 관찰되었다. 공진기의 성능지수인 유효 전기기계결합계수( $K_{ef{f^2}}$)값이 약 0.48%, 품질계수 ( $Q_{s}$) 값이 411이었다. 수치적으로 계산된 주파수 응답 특성으로부터 AlN 박막의 acoustic 상수들과 Bragg reflector의 반사계수를 도출한 결과 AlN 박막의 material acoustic impedance와 wave velocity는 AlN 고유의 값보다 감소되었으며, AlN 박막의 전기기계 결합계수( $K^2$)값은 c축 배향성 저하에 의해 매우 작은 값(0.49%)을 가졌다. 주파수 대역에서 Bragg reflector의 반사계수는 약 0.99966으로 계산되었으며 약 2.5 GHz에서 9.5 GHz까지의 넓은 반사대역을 나타내었다.다.었다.

• Water Engineering Research
• /
• 제1권1호
• /
• pp.75-81
• /
• 2000

The bragg reflection of obliquely incident monochromatic water waves propagating over a sinusoidally varying topography is theoretically investigated in this study. The eigenfunction expansion method is first employed to calculate reflection coefficients of water waves due to depth changes. A reasonable agreement is observed. Obtained reflection coefficients of normally incident waves are compared with laboratory measurements. Reflection coefficients of obliquely incident waves are then calculated. The wavenumber providing the Bragg reflection agrees well with analytical predictions.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.392-393
• /
• 2009

The study is aimed at studying a weakly relativistic oversized BWO with a Bragg reflector entrance of SWS. The Bragg reflector reflects microwaves, while it is open for beam propagations. By changing the boundary condition at the beam entrance, the effect of the Bragg reflector on the BWO performance is examined.

• 한국해안해양공학회:학술대회논문집
• /
• 한국해안해양공학회 2002년도 한국해안해양공학발표논문집 Proceedings of Coastal and Ocean Engineering in Korea
• /
• pp.31-34
• /
• 2002

Bragg 반사는 입사된 주기파의 진폭이 해저지형의 진폭의 2배가 될 때 파랑의 반사율이 공명현상(resonance)에 의해 매우 커지는 물리적 현상을 말한다. Bragg 반사를 응용할 경우, 외해로부터 입사되는 파랑 에너지의 상당량을 반사시킬 수 있으므로 항만이나 방파제 등의 해안구조물을 경제적으로 설계하고 보호할 수 있다. 또한, 해안선 보호 및 불필요한 침식이나 퇴적 등을 고려한 연안개발계획의 효율적 수립이 가능하다. (중략)

• Journal of the Optical Society of Korea
• /
• 제3권2호
• /
• pp.69-73
• /
• 1999

This paper demonstrated the performance of a palladium wire hydrogen sensor based on a fiber Bragg grating as a means of developing a quasi-distributed hydrogen sensor network capable of operating at cryogenic temperatures. The new approach employing a fiber Bragg grating based palladium hydrogen sensor described in this study is advantageous over other traditional hydrogen sensors because of the multiplexing capability of fiber Bragg gratings. The sensitivity of the hydrogen sensor at room temperature is approximately 2.5 times that of the hydrogen sensor at cryogenic temperatures.

• Journal of the Optical Society of Korea
• /
• 제17권2호
• /
• pp.172-176
• /
• 2013

For demonstrating widely tunable external cavity lasers operating for near-infrared (NIR) wavelength, a flexible polymer waveguide with an imbedded Bragg grating is incorporated. Due to the superior flexibility of the polymer material, the reflection wavelength of the Bragg grating is widely tunable by imposing tensile and compressive strains on the flexible Bragg grating. A third-order Bragg grating is formed on the device for facilitating the fabrication method. With a superluminescent laser diode as a gain medium of ECL, the tunable laser exhibited output power of -3 dBm and a tuning range of 32 nm.

• 조명전기설비학회논문지
• /
• 제26권2호
• /
• pp.44-50
• /
• 2012

When the fiber Bragg gratings are embedded in a fiber-optic Sagnac loop for measuring temperature or strain, it is difficult to separate the Bragg wavelengths. The transmitted light is mixed with the reflected Bragg wavelengths in the photo-detector, working as noises. To suppress the noises, we placed the FBG sensors and a fiber-optic attenuator at asymmetric positions in the loop. With the arrangement the reflected light became much bigger than the transmitted light, enabling the separation of the reflected Bragg wavelengths with almost the same signal-to-noise ratio of the FBG sensors outside the loop.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2002년도 하계학술발표회
• /
• pp.142-143
• /
• 2002

KIST에서는 Pulsed Laser를 사용하여 3차원 image를 재생할 수 있는 Electro-Holographic System을 만들어 CGH이미지를 구현하였다. CGH 이미지를 구현하기 위한 SLM (Spatial Light Modulator)으로 TeO$_2$ 결정의 Shear Mode 에서 동작하는 Bragg type의 다채널 AOSLM(Acousto-optic Spatial Light Modulator)이 사용되었다. 이 Bragg type 다채널 AOSLM에서는 광원이 특정 Bragg 각도로 입사하였을 때 다른 고위 차수는 억압되고 ＋나 -의 첫번째 차수의 회절 빔만이 형성된다. (중략)