• 제목/요약/키워드: Br

검색결과 2,135건 처리시간 0.03초

고도정수처리 공정에서 브로메이트의 거동 평가 (Formation behaviour of Bromate in Processes of Advanced Water Treatment System using Nakdong river water)

  • 김영진;현길수
    • 상하수도학회지
    • /
    • 제25권4호
    • /
    • pp.605-610
    • /
    • 2011
  • The objectives of this study are to investigate a bromate behaviour in the processes of advanced water treatment system (AWTS: preozonation, coagulator-settler, rapid sand filter, postozonation, biological activated carbon (BAC) beds) and to investigate the effects of ozonation, pH and ammonia nitrogen on bromate (${BrO^-}_3$) formation. As a result, $BrO_3$ was not detected in the processes of the AWTS without ozonation, while it was detected in a preozonated and postozonated water. For $BrO_3$ formation during June to November, the $BrO_3$ concentration of <9.4${\mu}g/L$ was observed in postozonated water, while it was reduced to about 46% by BAC beds. When applied ozone dosage and ozone contact time for influent with $Br^-$ of <0.3mg/L were 0.5-2.0mg/L.min and 10 min., $BrO_3$ concentration increased with increasing ozone dosage. Longer contact time and lower ozone level also was needed to inhibit the formation of $BrO_3$. At ozone dosage of 1.4 mg/L.min, the formation rate of $BrO_3$ increased with increase of pH value. When $NH_4-N$ concentration increased from 0.1mg/L to 0.4mg/L, $BrO_3$ concentration decreased to about 38%. These results revealed that $BrO_3$ concentration increased with increasing Br level, ozone dosage, and pH value, while it decreased with increase of $NH_4-N$ concentration.

1-Chlorobutadiene-Butadiene Copolymer의 수가교반응(水架橋反應)에 관한 연구(硏究)(I) (A Study on Curing Reaction of 1-Chlobutadiene-Butadiene Copolymer by Moisture)

  • 유종선;백남철
    • Elastomers and Composites
    • /
    • 제22권3호
    • /
    • pp.195-203
    • /
    • 1987
  • 본(本) 연구(硏究)는 기능성(機能性) elastomer 개발(開發)의 일환(一環)으로서 1-chlorobutadiene-butadiene copolymer(CB-BR)의 수가교(水架橋)에 의(依)한 기능성(機能性)의 향상(向上)에 그 목적(目的)을 두었으며 가교제(架橋劑)로서 3-aminopropyltriethoxysilane을 이용(利用)하여 CB-BR의 활성염소(活性鹽素)와의 용액반응(溶液反應)을 속도론적(速度論的)으로 해석(解析)하였다. 그리고 APS와 CB-BR을 실제공정(實際工程)에서 배합(配合)하여 수중가교반응(水中架橋反應)을 진행(進行)시켜 이에 따른 물성(物性) 검토(檢討)를 하므로써 다음과 같은 결론(結論)을 얻었다. 1. CB-BR은 용액계(溶液系)에서 APS와 용이(容易)하게 반응(反應)하며 이때의 반응(反應) 속도상수(速度常數) 및 활성화(活性化)에너지는 다음과 같다. 2. CB-BR+APS 수가교체(水架橋體)의 최적(最適) press 조건(條件)은 $150^{\circ}C{\cdot}20$분(分)이고 이들 가교체(架橋體)의 물성(物性)을 고무탄성체(彈性體) 이론(理論)에 의하여 가교진행(架橋進行)의 타당성(妥當性)을 검토(檢討)한 결과 이론치(理論値) q=1에 근접(近接)함을 알았다.

  • PDF

액상 BR의 분자 크기가 실리카로 보강된 SBR 배합물의 특성에 미치는 영향 (Influence of Molecular Size of Liquid BR on Properties of Silica-Filled SBR Compounds)

  • 최성신
    • Elastomers and Composites
    • /
    • 제36권3호
    • /
    • pp.162-168
    • /
    • 2001
  • 저분자량 폴리부타디엔 (액상 BR)은 실리카로 보강된 스티렌-부타디엔 고무 (SBR) 배합물에서 실리카 분간을 향상시킨다. 본 연구에서는 액상 BR의 분사량이 미치는 영향에 내하여 조사하였다. 레오 그래프에서 측정되는 최소 토크와 최내 토크는 액상 BR의 분자량이 큰 것(HLBR)을 사용했을 때가 액상 BR의 분자량이 작은 것 (LLBR)을 사용했을 때 보다 더 낮지만 델타 토크는 거의 파이가 없다. 무니 스코치 시간은 HLBR을 사용했을 때 더 빨라졌다. 모듈러스는 HLBR을 사용했을 때 더 낮았지만 인장 강도는 더 강하였다. 신율은 HLBR을 사용했을 때 더 길었다. 열노화에 대한 안정성은 LLBR을 사용한 배합물이 HLBR을 사용한 것보다 더 우수하였다.

  • PDF

실리콘 단결정 잉곳용 석영유리 도가니의 brownish ring에 대한 연구 (A study on the brownish ring of quartz glass crucible for silicon single crystal ingot)

  • 정윤성;최재호;민경원;변영민;임원빈;노성훈;강남훈;김형준
    • 한국결정성장학회지
    • /
    • 제32권3호
    • /
    • pp.115-120
    • /
    • 2022
  • 반도체 웨이퍼용 실리콘 잉곳 제조과정에서 사용되는 석영유리 도가니 내측표면의brownish ring (BR)에 대해 연구하였다. BR의 크기는 20~30 ㎛이고 비대칭 갈색 고리형태이다. 도가니 위치에 따라 BR의 크기와 분포가 상이하며, Si 잉곳 성장시 도가니 온도가 가장 높은 round 부가 가장 크고 많았다. BR은 석영유리보다 열팽창계수가 큰 cristobalite를 함유하고 있어 표면 crack이 나타나는 것으로 판단된다. BR의 발색 현상과 p in hole은 산소 결손에 의한 것으로 생각된다.

Anisotropic etching of polysilicon in a $Cl_2/CH_3Br/O_2$ Plasma

  • Yi, Whi-Kun
    • Journal of Korean Vacuum Science & Technology
    • /
    • 제3권1호
    • /
    • pp.24-29
    • /
    • 1999
  • The characteristic behaviors of CH3Br were examined first for the dry etching of polysilicon in a Cl2/CH3Br/O2 plasma. CH3Br is revealed one of the excellent additive gases to control anisotropy of etching profile and to give no undercutting for various typed of polysilicons. CH3Br acts as a passivation precursor on the side wall in etch cavity by forming polymer-like films such as CHxBry(x+y=1,2). The decrease of etch selectivity due to the reaction if the C-containing species from CH3Br with the surface O atoms of SiO2 was overcome by the addition of O2 into plasma, resulting that the selectivity increased by 2~3 times. According to the results of optical emission signals, CH3Br should be dissociated into several fragments to give more hydrogen atoms than bromine atoms in our helical resonator system.

  • PDF

생쥐에서 사간 추출물의 기억력 감퇴에 대한 개선 효과 (Belamcandae Rhizoma Extract Improves Memory Impairment in Mice)

  • 정지욱
    • 생약학회지
    • /
    • 제52권1호
    • /
    • pp.55-60
    • /
    • 2021
  • Belamcandae Rhizoma (BR), the rhizome of Belamcanda chinensis (L.) DC., possesses various biological properties such as anti-inflammatory activity, antioxidant activity and antimutagenic activity. However, there have been no studies on the anti-amnesic effect of BR. In this study, we assessed the improvement effect of BR extract on scopolamine-induced amnesia in mice. ICR mice were administrated with BR (50, 100 or 200 mg/kg, p.o.) and were subsequently injected of scopolamine (1 mg/kg, i.p.) 30 min before behavioral tasks (Y-maze, passive avoidance and Morris water maze tasks). To further assess the possible mechanisms of BR, the ex vivo acetylcholinesterase (AChE) activity was also evaluated. BR could ameliorate scopolamine-induced memory impairment and could regulate the cholinergic function by inhibiting the AChE activity. These data demonstrated that BR exert candidate extract against amnesia by restoring the cholinergic activity.

Influence of Loading Procedure of Liquid Butadiene Rubber on Properties of Silica-filled Tire Tread Compounds

  • Jinwoo Seo;Woong Kim;Seongguk Bae;Jungsoo Kim
    • Elastomers and Composites
    • /
    • 제57권4호
    • /
    • pp.129-137
    • /
    • 2022
  • Low molecular weight liquid butadiene rubber (LqBR) is a processing aid that can resolve the migration problem of tire tread compounds. Various studies are being conducted to replace the petroleum-based processing oil with LqBR. However, the effect of the loading time of LqBR in the compounding process on silica dispersion and vulcanizate properties is not well known. In this study, we analyzed silica dispersion, vulcanizate properties, and viscoelastic properties of silica-filled tire tread compound according to the processing aid type (TDAE oil, non-functional LqBR) and, silane terminated LqBR) and input timing. In the non-functional LqBR compounds, the 'with TESPT' mixing procedure showed excellent dynamic viscoelastic properties while silane-terminated LqBR compounds showed that the 'after TESPT' mixing procedure was good for 300% modulus and abrasion resistance.

점토에 대한 2개 염기성 염료 RB5와 GB4의 경쟁 흡착 (Competitive Adsorption of Two Basic Dyes RB5 and GB4 on a Local Clay)

  • Elaziouti, A.;Derriche, Z.;Bouberka, Z.;Laouedj, N.
    • 대한화학회지
    • /
    • 제54권1호
    • /
    • pp.110-114
    • /
    • 2010
  • 알제리에서 출토되는 소듐-교환된 Maghnia 점에 대한 2개 염기성 염료인 RB5와 BG4의 흡착평형을 조사한 결과, 최대 흡착능은 각기 465.13 와 469.90 mg/g 으로 나타났다. ADMI 방법을 사용한 BR5 and BG4의 동시 흡착 실험에서 3개 다른 초기 농도비R (R=$C_{(BR5)}/C_{(BG4)}$) 2.5/1, 1/1, 1/2.5 을 사용하였다. 염료혼합물로부터 등온흡착 여부를 조사하여 경쟁 흡착인지를 알수 있다. 점토 표면 위 흡착 활성자리를 위한 BR5 and BG4 간 매우 강한 상호작용(R = 1/1)이 관찰되었다. RB 5 와 BG 4의 흡착능의 비율 R' (R'=$Qe_{(mixture)}/Qe_{(single)}$)은 초기 농도 비율 R (R=$C_{(BR5)}/C_{(BG4)}$)이 2.5/1, 1/1 and 1/2.5 인 경우에 대해 각기 0.86, 0.74 and 0.84 로 얻어졌다. Langmuir 와 Freundlich 모델이 각기 염료 뿐만 아니라 염료 혼합물의 흡착 거동에 잘 들어 맞음을 알 수 있었다.

식초와 다슬기회분을 이용하여 제조한 초산칼슘의 품질 특성 (Quality Characteristics of Calcium Acetate Prepared with Vinegars and Ash of Black Snail)

  • 이명예;이예경;김순동
    • 한국식품영양과학회지
    • /
    • 제33권3호
    • /
    • pp.593-597
    • /
    • 2004
  • 천연의 수용성 칼슘자원을 얻기 위하여 현미식초(Br),감식초(Pe) 및 사과식초(Ap)와 다슬기 회분으로 제조한 액상 및 고상의 초산칼슘(LCA및 SCA) 즉, 액상으로 Br-LCA, Pe-LCA, Ap-LCA와 고상으로 Br-SCA, Pe-SCA, Ap-SCA의 품질특성을 조사하였다. 초산칼슘 제조용 식초의 pH는 2.34∼3.06 범위였으며, 식초 100 mL과 반응하는 다슬기 회분의 양은 20.43∼23.50g, 고상 초산칼슘의 수율은 11.02∼13.01%(w/v)이었다. Ap-LCA 및 Ap-SCA의 색상은 연한 황색을 띠었으나 Br-LCA 및 Br-SCA는 갈색, Ap-LCA 및 Ap-SCA는 진한 갈색을 띠었다. Br-LCA, Pe-LCA 및 Ap-LCA의 칼슘함량은 각각 3.02, 2.06 및 2.30%(w/v)이었으며, Br-SCA, Pe-SCA 및 Ap-SCA의 칼슘함량은 각각 27.15, 16.31 및 19.48%(w/w)이었다. 고상초산칼슘의 용해도는 증류수에서 36.82∼39.92%(w/v), 소주에서 32.05∼39.04%(w/v), 진간장에서 13.12∼18.65%(w/v), 이온음료에서 38.35∼38.90%(w/v), 요구르트에서 33.47∼35.58%(w/v)이었으며 두유와 우유에서는 curd를 생성하였다. 신맛과 쓴맛은 표준품에 비하여 낮았으나 떫은 맛, 비린 맛 및 맛난 맛은 높았다.

RNA Interference 및 T-DNA Integration 방법에 의한 배추 기능유전자 Silencing 효과 비교 (Comparison of RNA Interference-mediated Gene Silencing and T-DNA Integration Techniques for Gene Function Analysis in Chinese Cabbage)

  • 유재경;이기호;박영두
    • 원예과학기술지
    • /
    • 제30권6호
    • /
    • pp.734-742
    • /
    • 2012
  • 본 연구는 배추의 유전자 기능분석을 위한 RNAi 유전자 침묵 기법과 T-DNA 삽입 기법을 비교하기 위해 수행하였다. 두 종류의 형질전환 계통이 이용되었으며 BrSAMS-knockout(KO) 계통은 T-DNA 삽입으로 한 개의 Brassica rapa S-adenosylmethionine synthetase(BrSAMS) 유전자가 기능을 상실한 계통이었으며 BrSAMS-knockdown(KD) 계통은 RNAi 방법을 통해 BrSAMS 유전자들의 발현이 억제된 계통이었다. KO 계통과 KD 계통의 microarray 분석 결과에서는 SAMS 유전자와 관련된 sterol, 자당, homogalacturonan 생합성 및 glutaredoxin-related protein, serine/threonine protein kinase, 그리고 gibberellin-responsive protein 유전자들의 발현 수준이 뚜렷한 차이를 보여 주었다. 그러나 KO 계통의 유전자 발현 양상은 하나의 BrSAMS 유전자가 기능을 상실하였음에도 불구하고 대조 계통과 비교하여 RNAi기법을 적용한 KD 계통에 비해 큰 차이를 보여주지 못했다. 또한 직접적으로 SAMS 유전자와 관련된 폴리아민과 에틸렌 합성 유전자들의 발현 변화도 KD 계통에서 더 잘 나타났다. 본 연구에서 microarray 결과를 이용한 KO 계통의 BrSAMS 기능분석은 배추과식물의 게놈 triplication 발생으로 인하여 다수로 존재하는 SAMS 유전자들 때문에 명확한 결론을 얻을 수 없었다. 결론적으로 배추와 같은 배수체 작물의 유전자 기능 분석은 RNAi silencing에 의한 유전자 knock-down 기법이 T-DNA 삽입에 의한 knock-out 기법보다 더욱 효율적인 것으로 나타났다.