• Progress in Superconductivity
• /
• 제14권1호
• /
• pp.30-33
• /
• 2012

We have grown $MgB_2$ superconducting thin films on the SiC buffer layers by means of hybrid physical-chemical vapor deposition (HPCVD) technique. Prior to that, SiC was first deposited on $Al_2O_3$ substrates at various temperatures from room temperature to $600^{\circ}C$ by using the pulsed laser deposition (PLD) method in a vacuum atmosphere of ${\sim}10^{-6}$ Torr pressure. All samples showed a high transition temperature of ~40 K. The grain boundaries of $MgB_2$ samples with SiC layer are greater in amount, compare to that of the pure $MgB_2$ samples. $MgB_2$ with SiC buffer layer samples show interesting change in the critical current density ($J_c$) values. Generally, at both 5 K and 20 K measurements, at lower magnetic field, all $MgB_2$ films deposited on SiC buffer layers have low $J_c$ values, but when they reach higher magnetic fields of nearly 3.5 Tesla, $J_c$ values are enhanced. $MgB_2$ film with SiC grown at $600^{\circ}C$ has the highest $J_c$ enhancement at higher magnetic fields, while all SiC buffer layer samples exhibit higher $J_c$ values than that of the pure $MgB_2$ films. A change in the grain boundary morphologies of $MgB_2$ films due to SiC buffer layer seems to be responsible for $J_c$ enhancements at high magnetic fields.

• 대한기계학회논문집B
• /
• 제21권4호
• /
• pp.579-588
• /
• 1997

The heat transfer and flow measurements from a convex curved surface to a circular impinging jet have been made. The flow at the nozzle exit has a fully developed velocity profile. The jet Reynolds number (Re) ranges from 11,000 to 50,000, the dimensionless nozzle-to-surface distance (L/d) from 2 to 10, and the dimensionless surface curvature (d/D) from 0.034 to 0.089. The results show that the stagnation point Nusselt number (N $u_{st}$ ) increases with increasing value of d/D. The maximum Nusselt number at the stagnation point occurs at L/d .ident. 6 to 8 for all Re's and d/D's tested. For larger L/d, N $u_{st}$ dependency on Re is stronger due to an increase of turbulence in the approaching jet as a result of the more active exchange of momentum with a surrounding air. The local Nusselt number decreases monotonically from its maximum value at the stagnation point. However, for L/d=2 and Re=23,000, and for L/d.leq.4 and Re=50,000, the stream wise Nusselt number distributions exhibit secondary maxima at r/d .ident. 2.2. The formation of the secondary maxima is attributed to an increase in the turbulence level resulting from the transition from a laminar to a turbulent boundary layer.ndary layer.

• Journal of the Korean Wood Science and Technology
• /
• 제29권3호
• /
• pp.1-13
• /
• 2001

Compression, lateral, and opposite woods in the stem and branch of rimu (Dacrydium cupressinum Lamb.), a softwood species indigenous to New Zealand, were described and compared in the anatomical aspects. Qualitatively, growth rings were wide in the compression wood, intermediate in the lateral wood, and narrow in the opposite wood. Tracheid transition from early wood to late wood was very gradual in the compression wood but was more abrupt in both the lateral and opposite woods. When viewed transversely, compression wood tracheids showed a roundish outline except at the growth ring boundary but lateral and opposite wood tracheids were angular to rectangular in outline. Intercellular spaces were occasionally detected in the compression wood except in the late wood at the growth ring boundary but were absent from both the lateral and opposite woods. Slit-like extensions of the bordered pit openings caused by the location of pit apertures within short and narrow helical grooves were observed in the compression wood tracheids but not in the opposite or lateral wood tracheids. In the compression wood tracheids, fine striations in the form of fine checks or grooves were observed on the lumen surfaces and the innermost $S_3$ layer of secondary wall was absent. In the tracheids of lateral and opposite woods, the $S_3$ layer was sometimes absent but occasionally highly developed. Cross-field pits in the compression wood appeared to be piceoid due to slit-like pit apertures but those in the lateral and opposite wood tracheids showed cupressoid to taxodioid. Quantitatively, compression wood tracheids were somewhat shorter than those of opposite or lateral wood in stem but not different from the opposite or lateral wood tracheids in branch. The walls were thicker in the compression wood than in the lateral or opposite wood. Uniseriate rays in the compression wood were fewer than in the lateral or opposite wood.

• 한국재료학회지
• /
• 제8권7호
• /
• pp.579-583
• /
• 1998

P가 고농도로 도핑된 다결정 Si 기판 위에 Co/Ti 이중층막을 스퍼터 증착하고 급속열처리함으로써 얻어지는 실리사이드 층구조, 실리사이드막의 응집, 그리고 도펀트의 재분포 등을 단결정 Si 기판 위에서의 그것들과 비교하여 조사하였다. 다결정 Si 기판위에 형성한 Co/Si 이중층을 열처리할 때 단결정 기판에서의 경우보다 $CoSi_2$로의 상천이는 약간 더 낮은 온도에서 시작되며, 막의 응집은 더 심하게 일어난다. 또한, 다결정 Si 기판내의 도펀트보다 웨이퍼 표면을 통하여 바깥으로 outdiffusion 함으로써 소실되는 양이 훨씬 더 많다. 이러한 차이는 다결정 Si 내에서의 결정립계 확산과 고농도의 도펀트에 기인한다. Co/Ti/doped-polycrystalline si의 실리사이드화 열처리후의 층구조는 polycrystalline CoSi2/polycrystalline Si 으로서 Co/Ti(100)Si을 열처리한 경우의 층구조인 Co-Ti-Si/epi-CoSi2/(100)Si 과는 달리 Co-Ti-Si층이 사라진다.

• 대한토목학회논문집
• /
• 제13권4호
• /
• pp.101-109
• /
• 1993

관로흐름은 관벽과의 마찰 정도에 따라 층류와 난류, 난류인 경우 관벽은 매끄러운관 또는 완난류(緩亂流)(smooth turbulent flow) 조건과 거칠은 관 또는 전난류(全亂流)(rough turbulent flow) 조건으로 뚜렷이 대별할 수 있으며 층류와 완난류의 변이부에 해당하는 층류-완난류 천이조건 즉 천이층류(遷移層流)와 완난류-전난류 변이부 즉 천이난류(遷移亂流) 등 모두 다섯 개의 조건으로 구분지어 해석할 수 있다. 층류, 완난류 및 전난류 조건에서의 마찰계수 산정에는 기존 Prandt1의 이론식에 상당한 신뢰를 두고 있으나 천이난류에서의 마찰계수산정에 쓰고 있는 Colebrook-white 조합식은 이의 정도에 많은 의문점을 두어 왔다. 본 연구에서는 Nikuradse의 실험결과를 재 분석하여 천이난류조건에서의 유속분포식을 구하였으며, 이에 근거하여 관로에서 천이난류조건에 대한 마찰계수 산정식을 개발하였다. 천이층류에 대하여는 마찰계수를 내삽법으로 구할 것을 제의한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1172-1177
• /
• 2004

The evolution of incipient soot particles has been examined by high resolution electron microscopy (HRTEM) and elemental analyzer in ethylene-air inverse diffusion flames. Laser Induced Incandescence(LII) and laser scattering methods were introduced for examining the change of soot volume fraction and morphological properties in combustion generated soot qualitatively. Soot particles, collected by thermophoretic sampling were analyzed by using HRTEM to examine the nano structure of precursor particles. HRTEM micrographs apparently reveal a transformation of condensed phase of semitransparent tar-like material into precursor particles with relatively distinct boundary and crystalline which looks like regular layer structures. During this evolution histories C/H analysis was also performed to estimate the chemical evolution of precursor particles. The changes of C/H ratio of soot particles with respect to residence time can be divided into two parts: one is a very slowly increasing regime where tar-like materials are transformed into precursor particles (inception process) the other is an increasing region with constant rate where surface growth affects the increase of C/H ratio dominantly (surface growth region). These results provide a clear picture of a transition to mature soot from precursor materials.

• 한국전산유체공학회지
• /
• 제17권2호
• /
• pp.11-20
• /
• 2012

In this paper, the authors test various open codes and commercial codes based on CFD technology on the wind field around the complex terrain, which is a very important transport physics in the event of forrest fire. To study the physical mechanism inside the transition from surface fire to crown fire, the wake flow behind a parallel array of trees is studied numerically to show the flow separation in the turbulent boundary layer. Two sites near to Kunsan National University are chosen for the measurement of real wind field, and obtained data are compared with those from various computational codes such as Wind-Ninja, NIST-FDS, ANSYS-CFX, and ANSYS-FlUENT, etc. Through this research, feasibility and accuracy of the present CFD codes are investigated quantitatively, compared with the measured data with AWS.

• 한국연소학회지
• /
• 제9권2호
• /
• pp.38-44
• /
• 2004

The evolution of incipient soot particles has been examined by high resolution electron microscopy (HRTEM) and elemental analyzer in ethylene-air inverse diffusion flames. Laser Induced Incandescence(LII) and laser scattering methods were introduced for examining the soot volume fraction and morphological properties in combustion generated soot qualitatively. Soot particles, collected by thermophoretic sampling, were analyzed by using HRTEM to examine the nano structure of precursor particles. HRTEM micrographs apparently reveal a transformation of condensed phase of semitransparent tar-like material into precursor particles with relatively distinct boundary and crystalline which looks like regular layer structures. During this evolution histories, C/H analysis was also performed to estimate the chemical evolution of precursor particles. The changes of C/H ratio of soot particles with respect to residence time can be divided into two parts: one is a very slowly increasing regime where tar-like materials are transformed into precursor particles (inception process) the other is an increasing region with constant rate where surface growth affects the increase of C/H ratio dominantly (surface growth process). These results provide a clear picture of a transition to mature soot from precursor materials.

• 한국전기전자재료학회논문지
• /
• 제17권2호
• /
• pp.184-189
• /
• 2004

The effects of $Y_2$ $O_3$-substitution on the piezoelectric properties of Pb[(N $i_{1}$3/N $b_{2}$3/)$_{0.15}$(Z $r_{1}$2/ $Ti_{1}$2/)$_{0.85}$] $O_3$ceramics were investigated. It was found that $Y^{3+}$ ions incorporate into Pb-sites of the ceramics, resulting in a increased lattice anisotropy and formation of Pb-vacancies. As a result, an orthorhombic-tetragonal phase transition was induced when $\chi$>0.005. At the morphotropic phase boundary of x=0.005, piezoelectric constants( $k_{p}$, $k_{33}$, and $d_{33}$) showed maximum values of 0.53, 0.58, and 350pC/N, respectively. A 30-layer actuator fabricated with the above material showed a maximum strain of 0.12％ under 100V DC bias.

• 대한기계학회논문집
• /
• 제16권8호
• /
• pp.1566-1574
• /
• 1992

본 연구에서는 원형수직 충돌분류에 의한 가열평판의 전열특성을 해석하기 위 하여 최근 표면온도 측정에 많이 사용되고 있는 liquid crystal을 이용하였다. 즉 liquid crystal의 감온특성과 영상처리 기법을 이용하여 레이놀즈수 및 노즐과 충돌판 사이의 거리(L/D) 변화에 따른 전열면의 온도장 변화를 측정하였다.