• Title/Summary/Keyword: Bottom-up development

Search Result 256, Processing Time 0.029 seconds

A Study on the Functional Requirement Analysis for the Development of PDM System (제품정보관리 시스템 개발을 위한 기능 분석에 관한 연구)

  • 한관희;박찬우
    • Korean Journal of Computational Design and Engineering
    • /
    • v.7 no.1
    • /
    • pp.42-56
    • /
    • 2002
  • Presented in this study is a top-down functional requirement analysis procedure and the desired functionalities for PDM system development, and the benefits of top-down approach over a conventional bottom-up approach is also shown. For the purpose of top-down requirement analysis for PDM system, this study proposes 4P modeling view. 4P modeling view is defined as a modeling perspective for classifying functional requirements and integrating product-related information objects that must be man-aged within PDM systems. Based on 4P modeling templates, benchmarking analysis of commercially major PDM products is conducted and as a result of this analysis, this study suggests desired functionalities for PDM system.

Development of a Classification System for an Electrical Fire Investigation (전기화재 조사를 위한 분류체계 개발)

  • Lee, Jong-Ho;Kim, Doo-Hyun
    • Journal of the Korean Society of Safety
    • /
    • v.20 no.3 s.71
    • /
    • pp.53-57
    • /
    • 2005
  • This paper presents development of a classification system for an electrical fire investigation. In order to reduce an electrical fires and establish detailed prevention plans, the collection of an electrical fire causes and base data are very important. Based on this data, a new classification system for an electrical fire investigation was developed and the direction to the classification system was suggested by fundamental analysis. All of the collected information is analyzed by bottom-up method. Criteria items which based on base data were categorized to classify items. The classification of items were found out as follows : basic condition fire scene condition, fire sign, fire cause. Particularly, the fire cause category is classified. A new developed classification system for an electrical fire investigation will be used to analyse electrical fires easily and efficiently.

Distribution and Migration of Larval and Juvenile Sandfish Arctoscopus japonicus in the Coastal Waters off Gangwondo, Korea (강원도 연안의 도루묵(Arctoscopus japonicus) 자치어 분포와 회유)

  • Yang, Jae Hyeong;Yoon, Sang Chul;Park, Jeong-Ho;Choi, Young Min;Lee, Jae Bong;Yoon, Byoung Sun
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.46 no.5
    • /
    • pp.649-652
    • /
    • 2013
  • Distribution and migration of larval and juvenile sandfish Arctoscopus japonicus in the coastal waters off Gangwondo were determined monthly from samples collected by a rectangular bottom net in the coastal waters off Gangwondo from March to July, 2011. Fish were collected in abundance from the northern waters from March to June. The average total length (${\pm}SD$) was $11.5{\pm}1.6$ mm in March increased up to $53.5{\pm}3.3$ mm in June. The size distribution of sandfish by depth suggested that the fish grew waters less than 50 m deep until June, before moving deeper waters of around 100 m.

Development of a measurement device of water level at the bottom of fuel tanks using an optical cable sensor. (대용량 탱크에서 물과 유류의 이중 액면 높이 계측용 센서 개발)

  • 김진만;김희식
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2002.10a
    • /
    • pp.471-474
    • /
    • 2002
  • A fuel tank contains water at the bottom under the fuel. The water comes from humidity by temperature change of inside and outside of tank. So it is necessary to measure both level to check precise amount of oil. But measuring instrument for level of water and fuel is not available yet. Since the fuel is inflammable, the sensor system must not include any electric circuits in the fuel tank. Optical cable sensor can satisfy this non-explosive condition. The displacement of a float changing by water level makes bending curvature of optical cable different. As the float rise up, the optical cable is bent more and the light signal in the cable decreases. The reduction of light signal is detected and it is converted into the change of water level. The output signal from a photo diode shows the proportional relation of water level. The increase of sensor voltage as a unit of ㎷ follows the level position of the float that is located between water and gasoline in the tank.

  • PDF

Development of Sedimentary Sequence in the Masan Bay, South Sea of Korea (마산만 퇴적층서 발달 특성)

  • Choi, Dong-Lim;Lee, Tae-Hee
    • Ocean and Polar Research
    • /
    • v.29 no.4
    • /
    • pp.411-418
    • /
    • 2007
  • We studied the bottom morphology and sedimentary environments of the Masan Bay using high-resolution Chirp seismic profiles and sediments data. According to deep-drilled core samples (up to 20 m thick) penetrated into the weathered rock basement, the sediments consist largely of three sediment types: the lower sandy gravel facies (Unit I) of 1-4 m in thickness, the middle sandy mud and/or muddy sand facies(Unit II) of 1-2 m thick and the upper mudfacies (Unit III) of over 10 m in thickness. The sedimentary column above the acoustic basement can be divided into two major sequences by a relatively strong mid-reflector, which show the lower sedimentary sequenc e(T) with parallel to subparallel internal reflectors and the upper sedimentary sequence(H) with free acoustic patterns. Acoustic basement, the lower sedimentary sequence (T), and the upper sequence (H) are well correlated with poorly sorted massive sandy gravels (Unit I), the sand/mud-mixed sediment (Unit II), and the muddy facies(Unit III), respectively. The acoustic facies and sediment data suggest that the Masan bay is one of the most typical semi-enclosed coastal embayments developed during the Holocene sea-level changes. The area of the Masan Bay reduced from about $19\;km^2$ in 1964 to about $13\;km^2$ in 2005 by reclamation, and its bottom morphology changed as a result of dredging of about $2{\times}10^7\;m^3$.

Development of the Air-lifting & Suction-pumping System to Remove the Noxious Deposit in the Underwater (수중 유해성 유기퇴적물의 수거를 위한 Air-lifting & Suction-pumping System 개발)

  • Kim, Seoung-Gun;Song, Do-Sung;Kang, Mun-Kyu;Lee, Sang-Moo;Choi, Young-Chan;Ko, Yu-Bong
    • Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
    • /
    • 2002.10a
    • /
    • pp.251-255
    • /
    • 2002
  • Eutrophic matters accumulated on the bottom of sea, river and lake cause red tide phenomenon in ocean and outbreak green algae in river and lake. Systems are developed to remove the noxious deposit. But the existing systems remove not only the eutrophic matters but also natural materials, sand, pebbles etc. that should remain at the bottom. This paper describes a new system that can safely, and economically take away the noxious deposit in underwater. High pressure water jet is used to induce vortices in the triangular suction section, and air-lifting pump to lift up the deposit. The mixture of the water and deposit is filtered through the drum filters. An under camera shows the under water situation along the moving direction of the system that is controlled by a remote operator. This remote controlled moving system obliterate the necessity of the diver that usually costs high. The experimental results show the effectiveness of the suggested system.

  • PDF

Measurement of Flow Characteristics of Digester Installed Tray Motioned Mixer by Using Radiotracer (방사성추적자를 이용한 수직교반형 소화조의 유동 특성 측정)

  • Moon, Jinho;Park, Jang Guen;Kang, Munhu;Jung, Sung-Hee
    • Journal of Radiation Industry
    • /
    • v.9 no.3
    • /
    • pp.131-135
    • /
    • 2015
  • The flow characteristics of fluid were measured using radioactive tracer in pilot scale digester with tray motion mixer. In consideration of the detection volume of the detector and the size of the digester, 20 detectors were installed in the digester. The radioactive tracer eluted 8 mCi of $^{68}Ga$ from $^{68}Ge/^{68}Ga$ generator was injected into the digester bottom. After radiotracer injection, the flow pattern was measured on the basis of the initial movement of the tracer until its diffusion completely. Most of tracer moved to the wall along the bottom of the digester, and then rose along the wall. The other tracer moved up along the mixer, and then moved to the wall direction along the surface.

Engineering Performance of Extruded Fly Ash Cement Panel with Bottom Ash (잔골재로서의 바텀애시를 사용한 플라이애시 시멘트 압출경화체의 공학적 특성)

  • Lee, Myeong-Jin;Kim, Jin-Man;Han, Dong-Yeop;Choi, Duck-Jin;Lee, Keun-Woo
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.3 no.3
    • /
    • pp.252-260
    • /
    • 2015
  • The aim of this research is providing the fundamental data for treating and recycling the byproducts by using the wet processed bottom ash as a fine aggregate replacement for cement-based extruded panel. Although the cement-based extruded panel was used mainly as a cladding component with its high strength and outstanding durability, it was hardly spread because of low economic feasibility due to the high cost of additives or fibers which were used to achieve 14 MPa of flexural strength as a cladding material. As a solution of this drawback, by the previous research, it was possible to replace cement by fly ash up to 80 % by decreasing quality criteria with restricting the application to indoor purpose. In this research, based on the previous research, by using the bottom ash as a replacement of fly ash, improvement of shape retention performance is tried. As a result of the experiment on evaluating the optimum content and PSD of bottom ash, as the fineness modulus and content of bottom ash was increased, the extruding performance was decreased and penetration resistance was increased. Additionally, the optimum content and the maximum particle size was found as 20 %, and 0.3 mm, respectively.

A Study on the Rural Activation Project and the Special Economic Zone for Regional Development Policy (농촌활성화사업과 지역특화발전특구제도의 고찰)

  • Jung, Jinju
    • Journal of the Korean Institute of Rural Architecture
    • /
    • v.7 no.3
    • /
    • pp.1-8
    • /
    • 2005
  • Decrease in Population and graying of rural area by industrialization and urbanization are gone continuously. This makes happened various rural problems and the differential of standard of living with is arising day by day. Government is unfolding rural supporting project to solve continuously these problems. Recent Projects which are choosing not top-down process by government leading but bottom-up process through village inhabitants' participation and expert consultant get positive estimation. But those have difficulties because the support is attained only in the beginning step not continuously and inhabitants' number by graying is decreasing. The Special Economic Zone for Regional Development Policy is new access that regulation can differ according to special quality of each area depending on Localization Age. Through this transfer the competence that can mitigate or reinforce various regulations according to special quality of area in local government. So, back and maintain activation systematically so that each area could be developed specially. The purpose of The Special Economic Zone for Regional Development Policy is the activation of regional economy through development that regional specific character is. And there is characteristic that local government plans and takes the lead in all project contents, government gives regulation benefit by appointing the special economic zone and do not support finance and various tax remissions. Through investigation of such new policy, I wish to recognize what long-term plan and method could be possible to success rural activation continuously.

  • PDF

A Study of the Recognition Regarding the Influence of Public Library Service to Quality of Life (공공도서관 서비스가 이용자의 삶의 질에 미치는 영향력에 대한 인식 조사 연구)

  • Noh, Younghee;Park, Yang-Ha
    • Journal of the Korean BIBLIA Society for library and Information Science
    • /
    • v.28 no.1
    • /
    • pp.45-77
    • /
    • 2017
  • Measurement of quality of life is a concept studied in the field of administration, economy and society. And It is a standard of measuring performance of government. Recently, in governments and global society, QoL (Quality of life) index is used to reflect overall development degree. National policy and service effectiveness measurement using QoL index is more persuasive when it is combined with 'Bottom-Up Spillover Theory'. This study applied "National Quality of Life Index", the object QoL index used by National Statistical Office to see if the library service is recognized to actually have influence on the quality of life, and furthermore, see the difference of quality of life improvement recognition by user and quality of life improvement degree recognized by the librarian. "Recognition regarding shortage of time" was the highest index, and "concentration of fine dust" was the lowest. Regarding the recognition difference between librarian and user, it showed signifiant difference in 13 index, while the recognition difference by gender showed difference in 5 index, difference by age was 23, difference by residence was 14, and difference by number of visits to library was 9.