• Korean Management Science Review
• /
• v.32 no.1
• /
• pp.101-111
• /
• 2015

The glass production is classified into an energy intensive industry. This study develops a systematic procedure to derive Greenhouse Gas (GHG) emission inventory for the Korean glass industry. Based on the bottom-up approach in which the energy intensity in each production process is characterized, the EBs (energy balances) of glass production processes are derived. And the GHG emission is calculated for each of four types of glasses-flat glass, container glass, fiber glass, and LCD glass.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.10a
• /
• pp.404-411
• /
• 2002

The PSC 2-span-continuous-bridge by Up-Down Method on construction process is used for this research. It is measured the strain of lower-steel-plate at continuous section on the active range of negative moment at the stage of introducing compressive stress to bottom-plate and compared with results of structural analysis. On the basis of these results, it is confirmed the introduced compressive stress tか bottom-plate. The object of this research is presenting the degree of continuity at the stage of lifting up process.

• Korean Management Science Review
• /
• v.31 no.1
• /
• pp.41-48
• /
• 2014

This study presents a bottom-up approach for analyzing greenhouse gas (GHG) emissions for the shipbuilding industry in Korea. The overall procedures for deriving GHG emissions from the Korean shipbuilding industry are presented. Based on the long-term forecast on energy demands of the Korean shipbuilding industry, reference energy system (RES) and energy balance (EB) for the shipbuilding process are derived for bottom-up modeling.

• Journal of Energy Engineering
• /
• v.26 no.4
• /
• pp.74-83
• /
• 2017

Coal-fired power plants supply roughly 50 percent of the nation's electricity but produce a disproportionate share of electric utility-related air pollution. Coal combustion technology can facilitate volume reduction of up to 90%, with the inorganic contaminants being captured in furnace bottom ash and fly ash residues. These disposal coal ash residues are however governed by the potential release of constituent contaminants into the environment. Accelerated carbonation process has been shown to have a potential for improving the chemical stability and leaching behavior of bottom ash residues. The aim of this work was to quantify the volume of $CO_2$ that could be sequestrated with a view to reducing greenhouse gas emissions and stabilize the contaminated heavy metals from bottom ash samples. In this study, we used PC boiler bottom ash, Kanvera reactor (KR) slag and calcined waste lime for measuring chemical analysis and heavy metals leaching tests were performed and also the formation of calcite resulting from accelerated carbonation process was investigated by thermo gravimetric and differential thermal analysis (TG/DTA).

• Journal of Korean Society of Rural Planning
• /
• v.21 no.3
• /
• pp.67-84
• /
• 2015

Although the bottom-up rural area development project was conceived with great expectations, the general evaluation of the project so far reveals that it does not significantly differ from projects carried out in a top-down manner. This paper examines the nature of the bottom-up rural area development project with a focus on its background, including the roles of authority and project participants. Results revealed that the project was designed to be implemented in line with the state affairs ideology of the leader in a negative position of bureaucratic society. Though the form of implementation for the project seemed bottom-up as seen in the process of the roles and authorities in supporting organizations the top-down method of implementation can be seen in the authorities and roles of the central government. It was also noticed that the private sector, designed to elicit participation of various experts, looked to be managed and controlled by public organizations. The abovementioned signifies that the Korea rural area development project has been implemented not in a bottom-up manner but rather in an ever-strong top-down manner, which means that the central government holds more responsibility for the project's results, evaluation, and discussions. Furthermore, as seen in the background of the project, policies have been implemented in a top-down manner without the confidence of the bureaucratic society. Therefore, in order to implement a proper bottom-up rural area development project, there is a need for the bureaucratic society to have confidence in the rural societies.

• Journal of Powder Materials
• /
• v.13 no.6 s.59
• /
• pp.415-420
• /
• 2006

Nanostructured metallic materials are synthesized by bottom-up processing which starts with powders for assembling bulk materials or top-down processing starting with a bulk solid. A representative bottom-up and top-down paths for bulk nanostructured/ultrafine grained metallic materials are powder consolidation and severe plastic deformation (SPD) methods, respectively. In this study, the bottom-up powder and top-down SPD approaches were combined in order to achieve both full density and grain refinement without grain growth, which were considered as a bottle neck of the bottom-up method using conventional powder metallurgy of compaction and sintering. For the powder consolidation, equal channel angular pressing (ECAP), one of the most promising method in SPD, was used. The ECAP processing associated with stress developments was investigated. ECAP for powder consolidation were numerically analyzed using the finite element method (FEM) in conjunction with pressure and shear stress.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2536-2539
• /
• 2008

A study has been made on how to occur inertial oscillations in a rotating flow. The flow is considered to be induced by differentially-rotating top and bottom disks with infinite radius. The top and bottom disks are assumed to be set in motion over a finite initial start-up time duration from initial solid body rotation ($\Omega$) to each finial state, i.e., the top disk is rotating at the angular velocity (${\Omega}+{\Delta}{\Omega}$) and the bottom disk (${\Omega}-{\Delta}{\Omega}$). The system Reynolds number, which is a reciprocal of conventional Ekman number in rotating flows, is very high so that a boundary layer flow near disks is pronounced. From a strict theoretical analysis, it is clearly found the fact that inertial oscillation in a rotating flow is caused by excessive input of torque during start-up phase. Above finding comes from the following physics of theoretical result: in the case of abrupt start-up within very shorter time-duration than spin-up time scale, the inertial oscillation is magnified but it could be completely depressed in the case of mildly accelerated start-up, i.e., start-up process being established over diffusion time scale.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.333-338
• /
• 2003

Nano-imprint lithography(NIL) is a polymer embossing technique, capable of transferring nano-scale patterns onto a thin film of thermoplastics such as polymethyl methacrylate(PMMA) using this parallel process. Feature size down 10 nm have been demonstrated. In NIL, the pattern is formed by displacing polymer material, which can be squeeze flow of a viscous liquid. Due to the size of the pattern, a thorough understood of the process through experiments may be very different. Therefore we nead to resort to numerical simulation on the embossing process. Generally, there are two ways of numerical simulation on nano-scale flow, namely top-down and bottom-up approach. Top-down approach is a way to simulate the flow assuming that polymer is a continuum. On the contrary, in the bottom-up approach, simulation is peformed using molecular dynamics(MD). However, as latter method is not feasible yet. we chose the top-down approach. For the numerical analysis, two dimensional moving grid was used since the moving grid can predict the flow front. Effects of surface tension as well as the slip at the boundary were also considered.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10c
• /
• pp.327-329
• /
• 1998

Up-Propagation is an algorithm for inverting and learning neural network generative models. Sensory input is processed by inverting a model that generates patterns from hidden variables using top-down connections. The inversion process is iterative, utilizing a negative feedback loop that depends on an error signal propagated by bottom-up connections. The error signal is also used to learn the generative model from examples. the algorithm is benchmarked against principal component analysis in experiments on images of handwritten digits.

• Review of Culture and Economy
• /
• v.19 no.2
• /
• pp.97-120
• /
• 2016

This study aims to identify how performing artists in Korea, who are the target beneficiaries of the Arts Council Korea's Performing Arts Fostering Program, Chang-jak-san-shil(CJSS), would perceive and assess the current state of CJSS and its effects. To do so, this paper has adopted a bottom-up approach as a theoretical lens for policy evaluative analysis. This research engages with qualitative research design by conducting a series of in-depth interviews and FGIs with 28 participants in total. The interview participants consist of CJSS grantees(n=21) and peer-review panels(n=7) based on the intension to enhance objectivity and reliability of the study. Results of the data analysis suggest that the grant program still carries pressing needs to achieve a success as follows: providing post-program support, enhancing transparency of the panel appointment process and the peer review process, reflecting different nature of each arts discipline, and having more open communications with arts professionals. Based on these findings, this paper will provide and discuss about policy implications which can contribute to the performing arts domain at large.