• Journal of Mechanical Science and Technology
• /
• v.18 no.2
• /
• pp.313-324
• /
• 2004

A rich phenomenon in the dynamics of azimuthal vortices in a circular cylinder caused by the inertial oscillation is investigated numerically at high Reynolds numbers and moderate Rossby numbers. In the actual spin-up flow where both the Ekman circulation and the bottom friction effects are included, the first appearance of a seed vortex is generated by the Ekman boundary-layer on the bottom wall and the subsequent roll-up near the corner bounded by the side wall. The existence of the small vortex then rapidly propagates toward the inviscid region and induces a complicated pattern in the distribution of azimuthal vorticity, i.e. inertial oscillation. The inertial oscillation however does not deteriorate the classical Ekman-pumping model in the time scale larger than that of the oscillatory motion. Motions of single vortex and a pair of vortices are further investigated under a slip boundary-condition on the solid walls. For the case of single vortex, repeated change of the vorticity sign is observed together with typical propagation of inertial waves. For the case of a pair of vortices with a two-step profile in the initial azimuthal velocity, the vortices' movement toward the outer region is resisted by the crescent-shape vortices surrounding the pair. After touching the border between the core and outer regions, the pair vortices weaken very fast.

• Journal of Navigation and Port Research
• /
• v.28 no.7
• /
• pp.619-627
• /
• 2004

Introduction of wave model, considered the effect of shoaling, refraction, diffraction, partial reflection, bottom friction, breaking at the coastal waters of complex bathymetry, is a very important factor for most coastal engineering design and disaster prevention problems. As waves move from deeper waters to shallow coastal waters, the fundamental wave parameters will change and the wave energy is redistributed along wave crests due to the depth variation, the presence of islands, coastal protection structures, irregularities of the enclosing shore boundaries, and other geological features. Moreover, waves undergo severe change inside the surf zone where wave breaking occurs and in the regions where reflected waves from coastline and structural boundaries interact with the incident waves. Therefore, the application of mild-slope equation model in this field would help for understanding of wave transformation mechanism where many other models could not deal with up to now. The purpose of this study is to form a extended mild-slope equation wave model and make comparison and analysis on variation of harbor responses in the vicinities of Ulsan Harbor and Ulsan New Port, etc. due to construction of New Port in Ulsan Bay. We also considered the increase of water depth at the entrance channel by dredging work up to 15 meters depth in order to see the dredging effect. Among several model analyses, the nonlinear and breaking wave conditions are showed the most applicable results. This type of trial might be a milestone for port development in macro scale, where the induced impact analysis in the existing port due to the development could be easily neglected.

• Journal of KIISE:Databases
• /
• v.31 no.6
• /
• pp.684-698
• /
• 2004

The Hippocratic database model recently proposed by Agrawal et al. incorporates privacy protection capabilities into relational databases. Since the Hippocratic database is based on the relational database, it needs extensions to be adapted for XML databases. In this paper, we propose the Hippocratic XML database model, an extension of the Hippocratic database model for XML databases and present an efficient access control mechanism under this model. In contrast to relational data, XML data have tree-like hierarchies. Thus, in order to manage these hierarchies of XML data, we extend and formally define such concepts presented in the Hippocratic database model as privacy preferences, privacy policies, privacy authorizations, and usage purposes of data records. Next, we present a new mechanism, which we call the authorization index, that is used in the access control mechanism. This authorization index, which is Implemented using a multi-dimensional index, allows us to efficiently search authorizations implied by the authorization granted on the nearest ancestor using the nearest neighbor search technique. Using synthetic and real data, we have performed extensive experiments comparing query processing time with those of existing access control mechanisms. The results show that the proposed access control mechanism improves the wall clock time by up to 13.6 times over the top-down access control strategy and by up to 20.3 times over the bottom-up access control strategy The major contributions of our paper are 1) extending the Hippocratic database model into the Hippocratic XML database model and 2) proposing an efficient across control mechanism that uses the authorization index and nearest neighbor search technique under this model.

• Journal of the Korea Concrete Institute
• /
• v.19 no.4
• /
• pp.449-456
• /
• 2007

This research was conducted to analyze the features of the critical tensile stresses at the top and bottom of the concrete slab in the jointed concrete pavement (JCP) when subjected to both the environmental and vehicle loads. First, the stress distribution in JCP was analyzed when the system was subjected to only the environmental loads or the vehicle loads by using the finite element model of JCP. Then, the stresses were analyzed when the system was subjected to the environmental and vehicle loads at the same time. From this study, it was found that the critical tensile stresses at the slab bottom under the vehicle loads were almost constant regardless of the loading positions once the loads were applied at the positions having some distance from the transverse joint. The critical tensile stresses at the slab bottom could be obtained using the model consisting of normal springs for underlying layers by adding the critical stresses due to the environmental loads and the vehicle loads for the curled-down slab, and by subtracting the critical stress due to the environmental loads from that due to the vehicle loads for the curled-up slab. The critical tensile stresses at the top of the slab could be obtained using the model consisting of tensionless springs for underlying layers by adding the critical stress due to the environmental loads and the stress at the middle of the slab under the vehicle loads applied at the joint for the curled-up slab. An alternative to obtain the critical stresses at the top of the slab for the curled-up slab was to use the critical stresses under only the environmental loads obtained from the model having normal springs for underlying layers.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.2
• /
• pp.89-96
• /
• 2020

In this study, we developed a finite element model for the built-in bottom-freezer type refrigerator and then used the structural analysis method to analyze and evaluate the deflection of the doors. We tested the validity of the developed analytical model by measuring the deflection of the hinge when loads were applied to the upper and lower hinges of the refrigerating compartment and compared these with the analysis results. The comparison of the vertical displacement of the measured result and the analysis result showed an error ratio of up to 12.8%, which indicates that the analytical model is consistent. Using the analytical model composed of the cabinet, hinges and doors, we performed analyses for two cases: both doors closed, and the refrigerating door open. Since the maximum vertical displacement of the refrigerating compartment door (R-door) with the food load is smaller than the gap between the lower surface of the R-door and the upper surface of the freezer compartment door (F-door), it is judged that the R-door and the F-door do not contact when the doors are opened or closed. In addition, the analysis result showed that the difference between the vertical displacement at the hinge on the opposite side and the hinge side of the R-door is favorably smaller than the management criterion of the refrigerator manufacturer.

• The Korean Journal of Applied Statistics
• /
• v.31 no.2
• /
• pp.229-239
• /
• 2018

This paper introduces how to adopt the concept of temporal hierarchies to forecast time series data. Similarly as in hierarchical cross-sectional data, temporal hierarchies can be constructed for any time series data by means of non-overlapping temporal aggregation. Reconciliation forecasts with temporal hierarchies result in more accurate and robust forecasts when compared with the independent base and bottom-up forecasts. As an empirical example, we forecast traffic accident counts with temporal hierarchies and observe that reconciliation forecasts are superior to the base and bottom-up forecasts in terms of forecast accuracy.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.7
• /
• pp.1065-1074
• /
• 2008

The purpose of this paper was to present the proximity of clothing to self(PCS) which is a subjective measure developed by Sontag and Lee(2004). PCS is the scale to examine the relationship between self and clothing. Since PCS scale was prepared for American consumers, it is necessary to verify the validity as a measure to Korean consumers. Consumers' quality of life are functionally related to satisfaction with all of life's domain and subdomains. Clothing in life facilitates the creativity and expressiveness to the wearer, especially to adolescent. The concept of bottom-up spillover effect developed by Lee et al.(2002) was adopted as research model. Data were gathered by surveying university students using convenient sampling, 419 questionnaires were used in the statistical analysis. It was proved that PCS scale was effective measure to Korean consumers. And also PCS scale could be a proxy indicator in view of the fact that clothing was deeply related to consumers' quality of life.

• The Korean Journal of Legal Medicine
• /
• v.42 no.4
• /
• pp.146-152
• /
• 2018

We investigated the neural correlates of accurate eyewitness memory retrieval using functional near-infrared spectroscopy. We analyzed oxygenated hemoglobin ($HbO_2$) concentration in the prefrontal cortex during eyewitness memory retrieval task and examined regional $HbO_2$ differences between observed objects (target) and unobserved objects (lure). We found that target objects elicited increased activation in the bilateral ventrolateral prefrontal cortex, which is known for monitoring retrieval processing via bottom-up attentional processing. Our results suggest bottom-up attentional mechanisms could be different during accurate eyewitness memory retrieval. These findings indicate that investigating retrieval mechanisms using functional near-infrared spectroscopy might be useful for establishing an accurate eyewitness recognition model.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.16 no.5
• /
• pp.209-214
• /
• 2021

Panoptic segmentation, which is now widely used in computer vision such as medical image analysis, and autonomous driving, helps understanding an image with holistic view. It identifies each pixel by assigning a unique class ID, and an instance ID. Specifically, it can classify 'thing' from 'stuff', and provide pixel-wise results of semantic prediction and object detection. As a result, it can solve both semantic segmentation and instance segmentation tasks through a unified single model, producing two different contexts for two segmentation tasks. Semantic segmentation task focuses on how to obtain multi-scale features from large receptive field, without losing low-level features. On the other hand, instance segmentation task focuses on how to separate 'thing' from 'stuff' and how to produce the representation of detected objects. With the advances of both segmentation techniques, several panoptic segmentation models have been proposed. Many researchers try to solve discrepancy problems between results of two segmentation branches that can be caused on the boundary of the object. In this survey paper, we will introduce the concept of panoptic segmentation, categorize the existing method into two representative methods and explain how it is operated on two methods: top-down method and bottom-up method. Then, we will analyze the performance of various methods with experimental results.

• International Journal of Contents
• /
• v.15 no.2
• /
• pp.53-58
• /
• 2019

The aim of this paper is to discuss how designers lead and direct 'technology-driven society' using their creative communication skill. To this end, it is required for communication designers to take conscious steps to recognize the future direction of their profession. Despite the advancement in technology, there is a human being at the center of all design activities. From a certain point of view, contemporary communication design takes an open-ended exploration of the subject matter, rather than a finished output. The notion of creative leadership may potentially expand more in terms of improving the methodology of today's visual culture. The paper will examine creative leadership that could be proposed by the challenge of discourse upon the upcoming industrial revolution. Today, communication designers are confronted by new leadership opportunities and challenges. Some leading designers seem to focus on brand new media technologies to prepare the 4th industrial revolutions. However, communication design cannot be discussed in the medium but can be understood as a process. Top-down and bottom-up process is always a concerned about the relationship since the focus of leadership has changed. In the top-down process, the leadership has existed between 'designer and client' because designers have played their role as a problem solver. On the other hand, there is a different model of leadership between 'design and technology' based on bottom-up process, which stem from the design authorship. In this regard, the new definition of creative leadership in the $4^{th}$ industrial revolution proposes a designer as a problem-finder based on the relationship between the 'designer and the public'.