• 한국자기학회지
• /
• 제12권4호
• /
• pp.127-131
• /
• 2002

자성터널접합(magnetic tunnel junction: MTJ)소자의 AlO$_{x}$터널장벽 절연층을 플라즈마 산화법으로 2번에 나누어 금속증착.산화를 반복하여 만들어 보았다. 이중산화I그룹은 10A의 $\AA$의 Al 하부 절연막을 증착하고 산화시간을 10 s로 완성한 후 그 위에 13$\AA$의 Al을성막하고 50, 80, 120s간 산화시켜 완성한 절연막의 특성을 알아보았다. 이중산화II그룹은 10$\AA$봐 Al하부 절연막의 산화시간을 30~120 s간 달리하고 그 위에 13 $\AA$의 Al을 성막하고 210 s간 산화시켜 완성한 절연막의 특성을 알아보았다. 이중산화공정으로 제조된 시편은 전 실험범위에서 자기저항비(magnetoresistance： MR)는 27% 이상으로 우수하였고, 이는 13 $\AA$의 Al을 증착하고 한번만 산화시키는 통상의 단일산화에 비해 MR비가 우수하고 공정범위가 넓었다. 수직단면 투과전자현미경(transmission electron microscope： TEM)으로 미세구조를 확인한 결과 이중산화가 단일산화보다도 더 얇고 균일한 두께를 유지함을 알 수 있었다 X선광전자분석(X-ray photoelectron spectroscopy： XPS)으로 확인한 결과 이중산화는 절연막층 하부 CoFe 자성층의 Fe의 산화를 방지하여, 결과적으로 단일산화법에 비해서 하부자성층의 산화를 방지하여 긴 산화시간 공정 범위에서도 우수한 MR비를 가질 수 있었다.

• 한국해양학회지
• /
• 제13권1호
• /
• pp.1-8
• /
• 1978

지층 속에 남아 있는 퇴적구조는 퇴적환경을 추정하는 중요한 지표가 된다. 암상이나 화석과는 달리 퇴적구조는 퇴적 현장에서 형성되고 외부로부터 전입될 수는 없기 때문이다. 퇴적구조는 기존 암석이나 퇴적층이 잘 노출되어 있는 노두에서는 쉽사리 연구될 수 있으나 지표면하에 존재하는 퇴적층 구조는 직접적인 방법으로서는 시추에 의해서만 연구될 수 있다. 그러나 지하층을 시추하기에는 시간적 경제적으로 많은 부담이 따르기 때문에 개략조사의 단계에서는 바람직하지 못하다. 탄성파 탐사 방법이 발전됨에 따라 비교적 장파장을 사용하여 얕은 지하층을 탐사할 때 대체적인 지층구조를 파악할 수가 있게 되었다. 이는 각 퇴적층이 Acoustic Impedance를 달리하기 때문에 나타나는 결과이다. 분해능이 50cm정도의 탄성파를 이용한 탄성파 탐사에서 얻어진 탄성파 반사 기록은 이 분해능 범위보다 큰 규모의 해저지층구조를 어느 정도 잘 반영해 준다.

• Journal of the Korean Wood Science and Technology
• /
• 제46권4호
• /
• pp.315-322
• /
• 2018

Bamboo culm comprises internodes and nodes and is tapered from the bottom to the top. Anatomically, bamboo culm comprises vascular bundles and parenchymal base tissue. The gross anatomical structure of a transverse section of any culm internode is determined by the shape, size, arrangement, and number of vascular bundles. The purpose of this research was to examine the morphology of culm and the distribution and shape of vascular bundles in Ampel bamboo (Bambusa vulgaris). Bamboo culms were harvested from the base. Test samples were obtained from a central 2-cm long segment of each internode across the entire length of the culm. Results showed an uneven spread of vascular bundles in the internode cross-section. Transitioning from the outer to the inner layer of the internode, the number of vascular bundles per unit area decreased and their shape was variable. The size of vascular bundles in the middle layer of the internode was greater than that of those in the outer and inner layers. The shape of vascular bundles was circular in the outer layer, which gradually transformed into vertical oval toward the middle layer and horizontal oval toward the inner layer. Vascular bundles were of type III and IV in the bottom of the culm and type III in the middle to the top of the culm.

• Transactions on Electrical and Electronic Materials
• /
• 제8권1호
• /
• pp.36-40
• /
• 2007

Inorganic layers, such as SiOxNy and SiOx deposited using plasma sublimation method, were tested as passivation layer for organic thin-film-transistors (OTFTs). OTFTs with bottom-gate and bottom-contact structure were fabricated using pentacene as organic semiconductor and an organic gate insulator. SiOxNy layer gave little change in characteristics of OTFTs, but SiOx layer degraded the performance of OTFTs severely. Inferior barrier properties related to its lower film density, higher water vapor transmission rate (WVTR) and damage due to process environment of oxygen of SiOx film could explain these results. Polyurea and polyvinyl acetates (PVA) were tested as organic passivation layers also. PVA showed good properties as a buffer layer to reduce the damage come from the vacuum deposition process of upper passivation layers. From these results, a multilayer structure with upper SiOxNy film and lower PVA film is expected to be a superior passivation layer for OTFTs.

• 대한토목학회논문집
• /
• 제13권2호
• /
• pp.267-277
• /
• 1993

본 논문에서는 유한요소법을 2차원 난류경계층에 적용하였으며, 점성유체의 시간의존 비압축성 운동을 시간과 압력장(場)에서 Navier-Stokes방정식과 vorticity방정식을 이용하여 정식 화하였다. 수치계산방법은 Galerkin방법에 기초하였으며, 난류 경계층의 eddy kinematic viscosity에 대해서는 Prandtl의 혼합거리이론을 도입하였다. 난류 경계층에서 파동에 의한 임의 저면에서 저질의 이동을 수치계산하였다. 유한 요소법에 의해 얻어진 결과는 진동흐름에 의한 경계층과 파동에 의한 경계층에서의 특성의 차이를 분명히 하였다.

• Journal of the korean society of oceanography
• /
• 제32권3호
• /
• pp.93-102
• /
• 1997

Coastal circulations during the (surface condition of an) idealized cold-air outbreak are numerically investigated with two-dimensional, non-hydrostatic model in which a constant bottom-slope exists. The atmospheric forcing during a cold-air outbreak is incorporated as the surface cooling and the wind stress. When the offshore angle of the wind-stress vector, defined as the angle measured from the alongshore axis, is smaller than 45 degrees, a strong downwelling circulation develops near the coast. A sharp density front, which separates the vertically homogeneous region from the offshore stratified region, is formed near the coast and propagates offshore with time. Onshore side of the density front, small-scale circulation cells which are aligned in the direction perpendicular to the bottom begin to develop as the near-coast homogeneous region broadens. The surface cooling enhances greatly the development of the surface mixed layer by convective motions due to hydrostatic instability. The convective motions reach far below the hydrostatically unstable layer which is attached to the surface. The small-scale circulation cells are appreciably modified by the convetion cell and the density front develops far offshore compared to the case of no surface cooling. As to the effect of the bottom slope, the offshore distance of the density front increases (decreases) as the bottom slope decreases (increases), which results from the fact that the onshore volume-transport (Ekman transport) of the low-density upper seawater remains almost constant when the wind-stress is maintained constant. It is shown that the bottom slope is an essential factor for the formation of both the density front and the alongshore current when the surface cooling is the only forcing.

• ALGAE
• /
• 제21권1호
• /
• pp.83-90
• /
• 2006

Phytoplankton community in the coastal waters off the northeastern Korean Peninsula were characterized from May 2002 to August 2003. Taxonomic composition, abundance and biomass were determined at two water depths at 10 sample sites. A total of 153 phytoplankton species including 121 diatoms, 28 dinoflagellates, 7 green algae and 7 other species were identified. The mean abundance of phytoplankton varied from 15 to 430 cells mL–1 in the surface layer and from 11 to 545 cells mL–1 in the bottom layer, respectively. Phytoplankton was more abundant in coastal stations relative to those in more open ocean. The most dominant species were marine diatoms such as Thalassionema nitzschioides, Licmorphora abbreviata, Chaetoceros affinis and Chaetoceros socialis. In addition, a few limnotic diatoms including Fragilaria capucina v. rumpens, the green alga Scenedesmus dimorphus, some marine dinoflagellates and Cryptomonas sp. appeared as dominant species. Mean concentration of total chlorophyll-a varied from 0.22 to 7.87 μg chl-a L–1 and from 0.45 to 6.79 μg chl-a L–1 in the surface and bottom layers, respectively. The contribution of phytoplankton each size-fractionated varied highly with season. The contribution of microphytoplankton to total biomass of phytoplankton in the surface and bottom layer was high in February and August 2003, and that of nano-phytoplankton was high in May 2002 in both surface and bottom layers.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1341-1342
• /
• 2006

Electrical characteristics of field-effect thin film transistors (TFTs) with p-channels of CdTe/CdHgTe core-shell nanocrystals are investigated in this paper. For the fabrication of bottom- and top-gate TFTs, CdTe/CrHgTe nanocrystals synthesized by colloidal method are first dispersed on oxidized p+ Si substrates by spin-coating, the dispersed nanoparticles are sintered at $150^{\circ}C$ to form the channels for the TFTs, and $Al_{2}O_{3}$ layers are deposited on the channels. A representative bottom-gate field-effect TFT with a bottom-gate $SiO_2$ layer exhibits a mobility of $0.21cm^2$/ Vs and an Ion/Ioff ratio of $1.5{\times}10^2$ and a representative top-gate field-effect TFT with a top-gate $Al_{2}O_{3}$ layer provides a field-effect mobility of $0.026cm^2$/ Vs and an Ion/Ioff ratio of $2.5{\times}10^2$. $Al_{2}O_{3}$ was deposited for passivation of CdTe/CdHgTe core-shell nanocrystal layer, resulting in enhanced hole mobility, Ior/Ioff ratio by 0.25, $3{\times}10^3$, respectively. The CdTe/CdHgTe nanocrystal-based TFTs with bottom- and top gate geometries are compared in this paper.

• 조명전기설비학회논문지
• /
• 제25권6호
• /
• pp.68-74
• /
• 2011

The touch or step voltages which exist in the vicinity of a grounding electrode are closely related to the earth structure and resistivity and the ground current. The grounding design approach is required to determine the grounding electrode location where the hazardous voltages are minimized. In this paper, in order to propose a method of mitigating the electric shock hazards caused by the ground surface potential rise in the vicinity of a counterpoise, the hazards relevant to touch voltage were evaluated as a function of the soil resistivity ratio $\rho_2/\rho_1$ for several practical values of two-layer earth structures. The touch voltage and current on the ground surface just above the test electrode are calculated with CDEGS program. As a consequence, it was found that burying a grounding electrode in the soil with low resistivity is effective to reduce the electric shock hazards. In the case that the bottom layer soil where a counterpoise is buried has lower resistivity than the upper layer soil, when the upper layer soil resistivity is increased, the surface potential is slightly raised, but the current through the human body is reduced with increasing the upper layer soil resistivity because of the greater contact resistance between the earth surface and the feet. The electric shock hazard in the vicinity of grounding electrodes is closely related to soil structure and resistivity and are reduced with increasing the ration of the upper layer resistivity to the bottom layer resistivity in two-layer soil.

• 한국진공학회지
• /
• 제20권5호
• /
• pp.356-360
• /
• 2011

유리 기판 위에 RF와 DC 마그네트론 스퍼터링 방법으로 100 nm 두께의 $In_2O_3$ 단층 박막과 $In_2O_3$ 100 nm/Cu 3 nm의 두께를 갖는 적층박막을 증착하고, 구리 기저 층 증착에 따른 상부 $In_2O_3$ 박막의 광학적, 전기적 특성의 변화를 연구하였다. 상온에서 증착 된 $In_2O_3$ 박막의 가시광 투과도와 면 저항은 79%와 2,300 ${\Omega}/{\square}$이었다. 구리 기저 층의 광 흡수에 의하여, $In_2O_3$/Cu 적층박막의 가시광 투과도는 71%로 감소하였으나, 면 저항은 110 ${\Omega}/{\square}$로 측정되어 상대적으로 우수한 전기적 특성을 구할 수 있었다. 본 연구에서 Figure of Merit 분석을 통하여 구리 기저 층이 상부 $In_2O_3$ 투명전극의 전기적, 광학적 특성을 개선 할 수 있음을 확인하였다.