• 대한토목학회논문집
• /
• 제31권6A호
• /
• pp.425-433
• /
• 2011

본 연구에서는 파랑하중에 의해 부유구조체 하면에서 발생하는 파압 현상을 규명하기 위한 실험적 연구를 수행하였다. 서로 다른 측면 형상과 하면 형상을 갖는 4개의 폰툰형 시험체를 제작하여 5 종류 파랑하중에 대한 수리모형실험을 실시하였다. 시험체의 하면에는 6개의 파압센서를 설치하였으며, 수리모형실험 동안 시험체 하면에 작용하는 파압을 측정하였다. 측정된 파압을 분석한 결과, 와플형의 하면 형상은 부유구조체 하면에 작용하는 파압에 거의 영향을 미치지 않으며, 하이브리드형의 측면 형상은 파압에 상당한 영향을 미치는 것으로 나타났다. 이것은 하이브리드형의 측면에 형성된 에어갭(Airgap)이 부유구조체에 작용하는 파랑의 충격 에너지를 일부 흡수하여 파압을 저감시키는데 기여하는 것으로 판단된다. 기존의 상자형 폰툰과 비교하였을 때 하이브리드형의 파압은 선수부에서 약 83%, 중간부에서 약 74% 및 선미부에서 약 53% 수준인 것으로 나타났다.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2005년도 추계학술대회지
• /
• pp.153-158
• /
• 2005

표면에 부착된 수직벽 후방의 난류전단흐름을 입자영상유속계를 이용하여 조사하였다. 하부 틈새를 갖는 수직벽 후류영역에서는 박리 후 비정상적인(unsteady) 재순환 영역이 형성되었으며, 약 x=3H위치에서 전단층의 재부착 및 난류경계층으로의 재발달 과정이 나타났다. 수직벽 직전의 오목한(concave) 유선곡률과 수직벽 후방의 볼록한(convex)유선곡률의 영향은 수직벽 주위에서 가장 크게 나타나고, 하류로 나아감에 따라 전단층 주위 유체의 유입 등으로 그 영향이 박리 전단층 내에서 커다란 와구조가 연속적으로 발생하였다.

• 한국기계가공학회지
• /
• 제19권4호
• /
• pp.58-64
• /
• 2020

Large-scale flooding due to extreme weather and typhoons causes heavy damage. This is especially true in urban areas where accumulated debris prevents the smooth drainage of rainwater in sewage facilities such as rain gutters installed near roads. In this study, to improve the drainage performance and effectively remove foreign substances by applying the dust screen used in rivers, the rain gutter with Coanda effect was simulated and compared with the experiment. The simulation was performed by setting the parameters to the fillet radius R₁ and R₂ at the top of the screen filter, the fillet radius R₃ at the bottom of the screen filter, and the height H of the gap W from the bottom. W is the gap at the backside of screen filter which is applied to stimulate the Coanda effect. According to the simulation results, the highest drain performance was 87.99% derived from R₁= 30mm, R₂= 5mm, R₃= 85mm, H= 75mm, and W= 2mm. The error rate of simulation results refer to the 4.89%~7.36% compared to the experimental results. In the future, by considering the slope according to the installation environment, the simulation results can be applied to the actual roadside to help prevent flood damage.

• Nuclear Engineering and Technology
• /
• 제37권6호
• /
• pp.565-574
• /
• 2005

The CANFLEX Mk-V bundle is designed to improve upon the critical heat flux (CHF) characteristics of the CANFLEX Mk-IV bundle. The main difference between these two bundles is an increase in bearing pad height of about 0.3 mm in the CANFLEX Mk-IV bundle. This change in bearing pad height leads to an increase in gap flow at the bottom of the bundle, primarily eliminating the localized narrow-gap effect that limits the CHF of the CANFLEX Mk-IV bundle. The objective of this paper is to examine the effects of bearing pad height and pressure tube creep on the sheath-temperature distribution, dryout power, and dryout location, as observed ken full-scale bundle tests, between CANFLEX Mk-IV and Mk-V bundles In uncrept and crept channels. A comparison of surface-temperature differences between the top and bottom elements of the bundles showed that increasing the bearing pad height has led to a more homogeneous enthalpy distribution in subchannels of the bundle. Initial dryout locations of the CANFLEX Mk-V bundle were mainly observed at the mid-spacer plane of either the $10^{th}$ (about $80\%$) or $11^{th}$ ($20\%$) bundle in the 12-bundle string, as compared to the mid-spacer and downstream-button planes for the CANFLEX Mk-IV bundle. Dryout power and boiling-length-average (BLA) CHF values exhibit consistent trends and little scatter with varying flow conditions for both types of CANFLEX bundles in uncrept and crept channels. An increase in pressure tube creep has led to a reduction in dryout power (about $20\%$ far the $3.3\%$ crept channel and $27\%$ for the $5.1\%$ crept channel as compared to dryout powers for the uncrept channel). Increasing the bearing pad height of the CANFLEX bundle has led to an increase in the dryout power. Overall, the dryout power of the CANFLEX Mk-V bundle is 7 to $10\%$ higher than that of the CANFLEX Mk-IV bundle at the inlet temperature range of interest (i.e., between 243 and $290^{\circ}C$).

• 대한기계학회논문집B
• /
• 제35권3호
• /
• pp.237-244
• /
• 2011

경사각이 대기압하의 포화상태인 물의 풀비등에 미치는 영향을 조사하기 위해 실험을 통한 연구를 수행하였다. 연구를 위하여 5mm의 틈새간격을 가지는 하부유로개폐 상태인 환상공간을 고려하였다. 환상공간의 내부에 설치된 튜브를 가열하였으며 튜브의 직경과 길이는 각각 25.4mm와 500mm이다. 경사각은 수평부터 수직까지 변경하였다. 본 실험의 결과를 틈새간격이 더 큰 환상공간 및 단일튜브에 대한 결과와 서로 비교하였다. 작은 틈새간격을 가지는 환상공간의 경우 경사각이 열전달에 미치는 영향은 그다지 크지 않음을 확인하였다. 그러나 환상공간이 수평상태인 경우 80kW/$m^2$에서 임계열유속이 관찰되었다. 액체 교란의 정도와 기포군집형성이 환상공간 내부 풀비등의 주된 열전달 기구로 이해된다.

• 한국조경학회지
• /
• 제24권1호
• /
• pp.1-14
• /
• 1996

The purpose of this study was an analysis of the elementary school child's attitude and dangerous factors of play apparatuses n elementary schools. The results were summarized as follows; 1. 53.0% of the reply child thought that play apparatuses were dangerous, and 41.0% of the total reply had experienced accidents by apparatuses, the child under 10 had experienced the accidents manytimes. 2. The types of injuries most frequently occurred are falls from play apparatuses, and part of the body most frequently injured parts of the body are arms and legs. 3. The danger of fall in play apparatuses that is over 3M amounted 19.6%, it asked safety of bottom materials. 4. Destructed play apparatuses reached up to 20.0%, and rusted or decomposed apparatuses reached to 28.4%. 5. The distance of each apparatus were very close ; it was within 0.3~1.5M, which was 24.9%, it was very dangerous factor. 6. The most frequent hazards of educational play apparatuses are ; - inappropriate size of apparatuses(height, gap, thick etc.)- inappropriate shape and finished state(bad welding and cutting, projection part etc.)- unsuitable use of bottom material in playground and safety color.- insufficient use zone.-inappropriate maintenance and inspection(endurance passage, erosin of iron-ware and wooden ware, projection of foundation concrete)

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 1993년도 수공학연구발표회논문집
• /
• pp.483-490
• /
• 1993

본 논문은 캡슐밀도의 균일성의 영향을 고려하여 관로내에서의 원통형 캡슐 흐름의 특성을 이해하기 위하여 수행된 연구결과를 기술한다. 캡슐의 중심 축방향으로의 밀도변화 영향을 실험적으로나 분석적인 방법으로 연구하였다. 실험은 직경 190mm, 길이 18m인 관에서 수행되었으며, 속도, 캡슐의 기울기, 캡슐바닥과 관과 간격이 여러가지 실험조건하에서 측정되었다. 실험데이타를 해석하기 위하여 무차원 변수로 주어지는 안정성지수(Stability Index)가 유도되었다. 관로에서의 캡슐의 거동은 안정성지수에 크게 영향을 받는다. 실험결과는 안정성지수가 캡슐거동과 캡슐밀도의 균일성과의 상관관계를 잘 설명하여주는 유효한 기준임을 증명하였다.

• 국제초고층학회논문집
• /
• 제6권4호
• /
• pp.297-300
• /
• 2017

Employers are realizing that workplaces have an immense impact on productivity. And, because people typically represent about 90% of a company's costs, even a slight improvement in productivity hits the bottom-line in a very big way. The focus is shifting away from saving money by reducing space needs or cutting energy requirements, and moving toward making the workplace friendlier and healthier. What is a healthy workplace, exactly? The answer should be clear by now. Mountains of research have expounded on this very topic, and then news outlets cover the latest discoveres ad infinitum. The problem is, research is rather dense, while the news isn't comprehensive. Office managers trying to improve workplace wellness want neither a 55-page report nor a half dozen articles to convince their landlord that their space can do better. Recognizing this gap, Harvard researchers have released a concise-yet-complete list of healthy building features. Here, we're sharing these nine features with a few insights of our own on the value of being healthy and productive. Find out: ${\bullet}$ What makes a healthy building and why is it so important ${\bullet}$ How to improve the health of your own office ${\bullet}$ What happens for your people and your bottom line when you make health a priority.

• International Journal of Precision Engineering and Manufacturing-Green Technology
• /
• 제5권5호
• /
• pp.659-670
• /
• 2018

The Industrial Internet of Things (IIoT) confronts industrial manufactures with economic, ecological, as well as social benefits and challenges, referring to the Triple Bottom Line of sustainability. So far, research has mainly investigated its dimensions in isolation or economic aspects have not been compared with ecological and social perspectives. Further, research misses studies that are devoted to the special characteristics and requirements of Small and Medium-sized Enterprises (SMEs). This study aims to contribute to close this research gap, providing a research context that encompasses all three dimensions of sustainability. The results are based on data obtained from 329 SMEs, 222 in Germany and 107 in China, therefore allowing for a comparison of the concepts "Industrie 4.0" and "Made in China 2025" in the context of SMEs. In general, German SMEs expect a lower impact through "Industrie 4.0", perceiving the concept as more beneficial for larger enterprises. We further find that Chinese SMEs foremost see social benefits. Challenges whilst introducing "Industrie 4.0"by German SMEs as well as several frame conditions are perceived more relevant than for "Made in China 2025", as seen by Chinese SMEs. The paper closes with implications for research and practice based on these findings.

• 한국전자파학회지:전자파기술
• /
• 제14권3호
• /
• pp.15-19
• /
• 2003

본 연구에서는 RF magnetron sputtering으로 상온에서 증착된 ZnO압전박막을 이용하여, 1.96 GHz 대역의 air gap type의 FBAR BPF를 개발하였다. FBAR BPF는 Si wafer에 절연막으로 열 산화막층(SiO$_2$)을 형성한 후, 형성된 산화막 위에 바닥전극(Al), ZnO압전층 그리고 상부전극(Mo)를 차례로 RF magnetron sputter장비를 사용하여 증착시키고, Si wafer를 dry etching하여 air hole을 구현함으로써 device를 제조하였다. 제조된 FBAR BPF의 ZnO압전층의 XRD분석 결과 (002)면 방향으로 우선 배향되었으며, XRC의 $\sigma$값은 1.018이었다. 삽입손실 1 dB 내외로 우수한 특성을 나타내었다.