Browse > Article
http://dx.doi.org/10.3795/KSME-B.2011.35.3.237

Effect of Orientation on Pool Boiling Heat Transfer in Annulus with Small Gap  

Kang, Myeong-Gie (Dept. of Mechanical Engineering Education, Andong Nat'l Univ.)
Publication Information
Transactions of the Korean Society of Mechanical Engineers B / v.35, no.3, 2011 , pp. 237-244 More about this Journal
Abstract
An experimental study was carried out to investigate the effect of the inclination angle on the nucleate pool boiling of saturated water at atmospheric pressure. We considered an annulus with a gap of 5 mm and a bottom opening. The inner tube of the annulus was heated, and the outer diameter and the length of the tube were 25.4 mm and 500 mm, respectively. The inclination angle was varied from horizontal to vertical. The results were compared to those for an annulus with a larger gap and a single tube. In the small-gap annulus, the effect of the inclination angle on the heat transfer was not significant. However, an early onset of the critical heat flux was observed at 80 kW/$m^2$ when the annulus was horizontal. Liquid agitation and bubble coalescence were considered to be the major heat-transfer mechanisms.
Keywords
Pool Boiling; Inclination Angle; Heat Transfer; Annulus;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
Times Cited By SCOPUS : 0
연도 인용수 순위
1 Kang, M. G., 2010, "Pool Boiling Heat Transfer on the Tube Surface in an Inclined Annulus," Int. J. Heat Mass Transfer, Vol. 53, pp. 3326-3334.   DOI   ScienceOn
2 Coleman, H. W. and Steele, W. G. 1999, Experimentation and Uncertainty Analysis for Engineers, 2nd Ed., John Wiley&Sons.
3 Sateesh, G., Das, S. K. and Balakrishnan, A. R., 2009, "Experimental Studies on the Effect of Tube Inclination on Nucleate Pool Boiling," Heat Mass Transfer, Vol. 45, pp. 1493-1502.   DOI
4 Howard, A. H. and Mudawar, I., 1999, "Orientation Effects on Pool Boiling Critical Heat Flux(CHF) and Modeling of CHF for Near-Vertical Surfaces," Int. J. Heat Mass Transfer, Vol. 42, pp. 1665-1688.   DOI   ScienceOn
5 El-Genk, M. S. and Bostanci H., 2003, "Saturation Boiling of HFE-7100 from a Copper Surface, Simulating a Microelectric Chip," Int. J. Heat Mass Transfer, Vol. 46, pp. 1841-1854.   DOI   ScienceOn
6 Kim, Y. H. and Suh, K. Y., 2003, "Onedimensional Critical Heat Flux Concerning Surface Orientation and Gap Size Effects," Nuclear Engineering and Design, Vol. 226, pp. 277-292.   DOI   ScienceOn
7 Liu, Z. and Zhang, T., 2004, "Critical Heat Flux during Natural Convection Boiling in Inclined Annular Tubes Submerged in Saturated Liquids," Int. Comm. Heat Mass Transfer, Vol. 31, pp. 169-179.   DOI   ScienceOn
8 Liu, Z., Liao, L., and Zhang, T., 2008, "Critical Heat Flux of Countercurrent Boiling in an Inclined Small Tube with Closed Bottom," Int. Comm. Heat Mass Transfer, Vol. 35, pp. 995-1000.   DOI   ScienceOn
9 Misale, M., Guglielmini, G., and Priarone, A., 2009, "HFE-7100 Pool Boiling Heat Transfer and Critical Heat Flux in Inclined Narrow Spaces," Int. J. Refrigeration, Vol. 32, pp. 235-245.   DOI   ScienceOn
10 Cornwell, K. and Houston, S. D., 1994, "Nucleate Pool Boiling on Horizontal Tubes: a Convection-Based Correlation," Int. J. Heat Mass Transfer, Vol. 37, Suppl. 1, pp. 303-309.
11 Kang, M. G., 2008, "Effects of the Inclination Angle on Pool Boiling in an Annulus," Int. J. Heat Mass Transfer, Vol. 51, pp. 5018-5023.   DOI   ScienceOn
12 Githinji, P. M. and Sabersky, R. H., 1963, "Some Effects of the Orientation of the Heating Surface in Nucleate Boiling'" ASME, J. of Heat Transfer, Vol. 85, p. 379.   DOI
13 Nishikawa, K., Fujita, Y., Uchida, S. and Ohta, H., 1984, "Effect of Surface Configuration on Nucleate Boiling Heat Transfer," Int. J. Heat Mass Transfer, Vol. 27, No. 9, pp. 1559-1571.   DOI   ScienceOn
14 Lienhard, J. H., 1985, "On the Two Regimes on Nucleate Boiling," ASME J. Heat Transfer, Vol. 107, pp. 262-264.   DOI
15 Jung, D. S., Venant, J. E. S., and Sousa, A. C. M., 1987, "Effects of Enhanced Surfaces and Surface Orientations on Nucleate and Film Boiling Heat Transfer in R-11," Int. J. Heat Mass Transfer, Vol. 30, No. 12, pp. 2627-2639.   DOI   ScienceOn
16 Fujita, Y., Ohta, H., Uchida, S., and Nishikawa, K., 1988, "Nucleate Boiling Heat Transfer and Critical Heat Flux in Narrow Space between Rectabgular Spaces," Int. J. of Heat Mass Transfer, Vol. 31, No. 2, pp. 229-239.   DOI   ScienceOn
17 Kang, M. G., 2000, "Effect of Tube Inclination on Pool Boiling Heat Transfer," ASME, J. of Heat Transfer, Vol. 122, Issue 1, pp. 188-192.   DOI   ScienceOn
18 Kang, M. G., 2003, "Effects of Tube Inclination on Pool Boiling Heat Transfer," Nuclear Engineering and Design, Vol. 220, pp. 67-81.   DOI   ScienceOn
19 Narayan, G. P., Anoop, K. B., Sateesh G. and Das, S. K., 2008, "Effects Surface Orientation on Pool Boiling Heat Transfer on Nanoparticle Suspensions," Int. J. Multiphase Flow, Vol. 34, pp. 145-160.   DOI   ScienceOn
20 Kang, M. G., 2008, "Effects of Tube Inclination on Saturated Nucleate Pool Boiling Heat Transfer," Trans. of the KSME(B), Vol. 32, No. 1, pp.116-124.
21 Parker, J. L. and El-Genk M. S., 2006, "Effect of Surface Orientation on Nucleate Boiling of FC-72 on Porous Graphite," ASME J. Heat Transfer, Vol. 128, pp. 1159-1175.   DOI   ScienceOn
22 van Stralen, S. J. D. and Sluyter, W. M. 1969, "Investigations on the Critical Heat Flux of Pure Liquids and Mixtures under Various Conditions," Int. J. Heat Mass Transfer, Vol. 12, pp. 1353-1384.   DOI   ScienceOn
23 Shoji, M., 2004, "Studies of Boiling Chaos: a Review," Int. J. Heat Mass Transfer, Vol. 47, pp. 1105-1128.   DOI   ScienceOn
24 Chun, M. H. and Kang, M. G., 1998, "Effects of Heat Exchanger Tube Parameters on Nucleate Pool Boiling Heat Transfer," ASME, J. of Heat Transfer, Vol. 120, pp. 468-476.   DOI   ScienceOn