• Structural Engineering and Mechanics
• /
• v.5 no.3
• /
• pp.269-281
• /
• 1997

The overall buckling mode in a composite steel-concrete beam over an internal support is necessarily lateral-distortional, in which the bottom compressive range displaces laterally and twists, since the top flange is restrained by the nearly rigid concrete slab. An efficient finite element method is used to study elastic lateral-distortional buckling in composite beams whose steel portion is tapered. The simplified model for a continuous beam that is presented herein is a fixed ended cantilever whose steel portion is tapered, and is subjected to moment gradient. This is intended to give an insight into distortion in a continuous beam that occurs in the negative bending region, and the differences between the cantilever representation and the continuous beam are highlighted. An eigenproblem is established, and the buckling modes and loads are determined in the elastic range of structural response. It is found from the finite element study that the buckling moment may be enhanced significantly by using a vertical stiffener in the region where the lateral movement of the bottom range is greatest. This enhancement is quantified in the paper.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.7
• /
• pp.926-932
• /
• 2017

Image distortion can occur when photographing deep sea targets with an optical camera. This problem arises because sunlight is not sufficiently transmitted due to seawater and various floating particles of dust. Particularly, color distortion takes place, causing green and blue color channels to be over emphasized due to water depth, while distortion of boundaries also occurs due to light refraction by seawater and floating particles of dust. These distortions degrade the overall quality of underwater images. In this paper, we analyze underwater images of the bottom of vessels. Based on the results, we propose a technique for color correction and edge enhancement. Experimental results show that the proposed method increases edge clarity by 3.39 % compared to the effective edges of the original underwater image. In addition, a quantitative evaluation and subjective image quality evaluation were concurrently performed. As a result, it was confirmed that object boundaries became clear with color correction. The color correction and contour enhancement method proposed in this paper can be applied in various fields requiring underwater imaging in the future.

• The Research Journal of the Costume Culture
• /
• v.30 no.2
• /
• pp.226-242
• /
• 2022

For clothing items that combine the top with the bottom, such as a jumper suit, it is necessary to design original forms to develop clothes in various styles that can satisfy aesthetic and functional needs. Therefore, to determine the original forms of women's jumper suits, this study aimed to analyze the patterns of women's jumper suits being sold in the market comparatively and evaluate their fitness. For the study method, this researcher obtained five types of women's jumper suits from local brands and compared the patterns' measured sizes, then conducted exterior evaluation on the surplus according to five different movements and analyzed the values of distortion of clothing pressure comparatively. According to the results, in the basic posture, brands A and C received favorable results, while in the other movements, brand B, which had the biggest surplus on the bottom, was evaluated favorably. In conclusion, in the patterns of women's jumper suits, a bigger surplus is added to either the crotch length or crotch girth rather than the top length, and the top and the bottom tend to have a different surplus according to the design. In addition, based on the values of body surface lengths according to the range of movements, this study suggests that an additional surplus be added to the length.

• Journal of the Korean Institute of Gas
• /
• v.8 no.3 s.24
• /
• pp.8-15
• /
• 2004

This paper presents von Mises stress, deformation, and rotating distortion moment characteristics of inner tank bottom plate as a function of a cryogenic temperature difference along the radial distance from the center area to the corner one. The calculated results show that the filling level of LNG at the beginning of the cool-down process is very important for the design safety analysis of the inner tank. Obviously the thermal loading by a temperature difference between the LNG vapor gas of $-80^{\circ}C$ and a LNG temperature of $-162^{\circ}C$ affects to the thermal related characteristics of the bottom plates and annular one. From the computed results, the temperature difference by a vapor gas and liquid of LNG may lead to the thermal instability of the bottom plate. This phenomenon may cause the system failure of an inner tank.

• Nuclear Engineering and Technology
• /
• v.56 no.2
• /
• pp.506-519
• /
• 2024

To simulate the verification process using materials from a decommissioned reactor, a mock-up of the bottom-mounted instrument nozzle in the Kori 1 reactor, where the nozzle was attached to a plate by J-groove dissimilar metal welding, was fabricated. The mock-up distortion was quantified by measuring the plate surface displacement after welding. The residual stresses formed on the support plate surface and the inner surface of the nozzle were then analyzed using the hole-drilling method, contour method, and neutron diffraction. Welding simulations were performed using a 3D finite element method to validate the measured results. The measured and computed stress distributions on the support plate exhibited reasonable agreement. Conversely, the stresses on the inside of the nozzle were found to have an indisputable difference in the contour method and neutron diffraction measurements, which demonstrated strong tensile and compressive hoop stresses, respectively. The possible origins of such differences were investigated and we have provided some suggestions for a precise evaluation in the simulation. This study is expected to be useful in future research on decommissioned reactors.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.101-104
• /
• 2008

Too high stress of the bottom Mo layer of the gate line is thought to be the main reason for H-line mura. H-Line mura is eliminated effectively by changing the gate line metal structure from Mo/AlNd/Mo to AlNd/Mo. The new structure does not influence the panel's electrical characteristics.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.1
• /
• pp.92-96
• /
• 2011

In this paper, we present a bandpass filter (BPF) based on composite right-/left-handed (CRLH) structure for improving the linearity of the power amplifier. The proposed BPF consist of the inter-digit signal line on the top plane and the complementary split ring resonator (CSRR) on the bottom plane, respectively. The insertion loss is minimized at operation frequency and the 2nd harmonic is suppressed by the bandpass filter using the CRLH structure, respectively. The output power of 33 dBm, the 2nd harmonic of -53.527 dBc, 3rd inter-modulation distortion of -36.16 dBc was obtained at 2.14 GHz, respectively. Compared with the reference power amplifier, the 2nd harmonic of 16 dB and 3rd inter-modulation distortion of 12 dB have been improved at 2.14 GHz, respectively.

• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.2
• /
• pp.30-36
• /
• 2014

Quality and resolution of camera in mobile device is improved significantly. In this paper, we propose block-based information hide techniques without image distortion for mobile device to solve image degradation in conventional watermarking methods. Information of image is composed with text such as camera maker, model, date, time, etc. Each text is converted to $8{\times}8$ pixel blocks and is added to the bottom of image. Generally image including block based information for image authentication are compressed using JPEG in mobile device. The vertical line value in JPEG header is modified by original size of image sensor. This technique can hide the block based authentication information using general decoder. In the experimental results, JPEG file size is slightly increased within 0.1% for the proposed block based authentication information encoding. Finally proposed methods can be adopted for various embedded systems using medical image, smart phone and DSLR camera.

• Journal of Broadcast Engineering
• /
• v.24 no.6
• /
• pp.1152-1162
• /
• 2019

With the rapid development of the VR industry, many VR contents are produced and circulated, and the need for copyright protection is increasing. In this paper, we propose a method of embedding and extracting watermarks in consideration of VR production process. In embedding, SIFT is performed by selecting the region where distortion is minimized in VR production, and transformed into frequency domain using DWT and embedded into the QIM method. In extracting process, in order to correct the distortion in the projection process, the top and bottom regions are changed to different projection methods and some middle regions are rotated using 3DoF to extract the watermark. After this processing, extracted watermark has higher accuracy than the conventional watermark method, and the validity of the proposed watermark is shown by showing that the accuracy is maintained even in various attacks.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.1
• /
• pp.239-260
• /
• 2023

The underwater acoustic wireless communication networks are generally formed by the different autonomous underwater acoustic vehicles, and transceivers interconnected to the bottom of the ocean with battery deployed modems. Orthogonal frequency division multiplexing (OFDM) has become the most popular modulation technique in underwater acoustic communication due to its high data transmission and robustness over other symmetrical modulation techniques. To maintain the operability of underwater acoustic communication networks, the power consumption of battery-operated transceivers becomes a vital necessity to be minimized. The OFDM technology has a major lack of peak to average power ratio (PAPR) which results in the consumption of more power, creating non-linear distortion and increasing the bit error rate (BER). To overcome this situation, we have contributed our symmetry research into three dimensions. Firstly, we propose a machine learning-based underwater acoustic communication system through long short-term memory neural network (LSTM-NN). Secondly, the proposed LSTM-NN reduces the PAPR and makes the system reliable and efficient, which turns into a better performance of BER. Finally, the simulation and water tank experimental data results are executed which proves that the LSTM-NN is the best solution for mitigating the PAPR with non-linear distortion and complexity in the overall communication system.